Synthesis, x-ray structure of ferrocene bearing Bis(Zn-cyclen) complexes and the selective electrochemical sensing of TpT

The new ligand, [Fc(cyclen)₂] (5) (Fc=ferrocene, cyclen=1,4,7,10-tetraazacyclododecane), and corresponding Zn^II complex receptor, [Fc{Zn(cyclen)(CH₃OH)}₂](ClO₄)₄ (1), consisting of a ferrocene moiety bearing one Zn^II-cyclen complex on each cyclopentadienyl ring, have been designed and prepared through a multi-step synthesis. Significant shifts in the ¹H NMR signals of the ferrocenyl group, cf. ferrocene and a previously reported [Fc{Zn(cyclen)}]²⁺ derivative, indicated that the two Zn^II-cyclen units in 1 significantly affect the electronic properties of the cyclopentadienyl rings. The X-ray crystal structure shows that the two positively charged Zn^II-cyclen complexes are arranged in a trans like configuration, with respect to the ferrocene bridging unit, presumably to minimise electrostatic repulsion. Both 5 and 1 can be oxidized in 1:4 CH₂Cl₂/CH₃CN and Tris-HCl aqueous buffer solution under conditions of cyclic voltammetry to give a well defined ferrocene-centred (Fc⁰/+) process. Importantly, 1 is a highly selective electrochemical sensor of thymidilyl(3′-5′)thymidine (TpT) relative to other nucleobases and nucleotides in Tris-HCl buffer solution (pH 7.4). The electrochemical selectivity, detected as a shift in reversible potential of the Fc⁰/+ component, is postulated to result from a change in the configuration of bis(Zn^II-cyclen) units from a trans to a cis state. This is caused by the strong 1:1 binding of the two deprotonated thymine groups in TpT to different Zn^II centres of receptor 1. UV-visible spectrophotometric titrations confirmed the 1:1 stoichiometry for the 1:TpT adduct and allowed the determination of the apparent formation constant of 0.89±0.10×10⁶ M⁻¹ at pH 7.4.

A novel route for the preparation of dimeric tetraorganodistannoxanes

The reaction of polymeric diorganotin oxides, (R₂SnO)_n (R=Me, Et, n-Bu, n-Oct, c-Hex, i-Pr, Ph), with saturated aqueous NH₄X (X=F, Cl, Br, I, OAc) in refluxing 1,4-dioxane afforded in high yields dimeric tetraorganodistannoxanes, [R₂(X)SnOSn(X)R₂]₂, and in a few cases diorganotin dihalides or diacetates, R₂SnX₂. The reported method appears suitable for the synthesis of fluorinated tetraorganodistannoxanes. Identification of [R₂(OH)SnOSn(X)R₂]₂ (R=n-Bu; X=Cl, Br) and [R₂(OH)SnOSn(X)R₂] [R₂(X)SnOSn(X)R₂] suggest a serial substitution mechanism starting from [R₂(OH)SnOSn(OH)R₂]₂. X-ray crystal structure determinations are reported for [Me₂(AcO)SnOSn(OAc)Me₂]₂ (29a), [i-Pr₂(Br)SnOSn(Br)i-Pr₂]₂ (20a), [c-Hex2(F)SnOSn(F)c-Hex₂]₂ (5a) and [c-Hex₂(F)SnOSn(Cl)c-Hex₂]₂ (36), respectively. These show the presence of a central (R₂Sn)₂O₂ core that is connected, via the oxygen atoms, to R₂Sn entities. Acetate (29a) or halides (5a, 20a, 36) complete the coordination about the tin centres.

Synthesis and structural properties of Anhydrous Rare Earth Cinnamates, [RE(cinn)3]

Anhydrous rare earth tris(cinnamates) [RE(cinn)3] (RE = La–Lu, Y and Sc and cinnH = trans-cinnamic acid) were prepared by metathesis in water and by direct reaction of the metal with cinnamic acid in a 1,2,4,5-tetramethylbenzene flux at ca. 200 °C. X-ray crystal structure determinations and X-ray powder data show that, in the solid state, the larger lanthanoids (La–Dy) form an isomorphous polymeric series consisting of homoleptic nine-coordinate metal centres bonded to three chelating and bridging tridentate cinnamates. The late REIII cinnamate (RE = Dy, Ho–Lu, Y) complexes also form linear one-dimensional polymeric chains with all RE metal atoms being seven-coordinate. The cinnamates are either bound tridentate bridging in a μ-η2:η1 fashion, or μ-η1:η1syn-syn bidentate bridging. A structural break occurs at dysprosium which has been characterised in both crystallographic forms, and gives solely the late RE form when precipitated at 80 °C. ScIII cinnamate was also isolated as an analytically pure precipitate which was, again, found to be anhydrous in nature. A structural change was identified by powder XRD between the late REIII cinnamates and ScIII cinnamate.

A new class of eight-membered Sn2P2O4 heterocycles. Crystal structure and electrolytic dissociation in solution of cyclo-[R2Sn(OPPh2O)2SnR2](O3SCF3)2(R=Me, t-Bu)

The syntheses of cyclo-[R₂Sn(OPPh₂O)₂SnR₂](O₃SCF₃)₂ (R = Me (1), t-Bu (2)) by the consecutive reaction of R₂SnO (R = Me, t-Bu) with triflic acid and diphenylphosphinic acid are presented. In the solid state, 1 and 2 were investigated by ¹¹⁹Sn MAS and ³¹P MAS NMR spectroscopy as well as X-ray crystallography and appear to exist as ion pairs of cyclo-[R₂Sn(OPPh₂O)₂SnR₂]²⁺ dications and triflate anions. In solution, 1 and 2 are involved in extensive equilibria processes featuring cationic diorganotin(IV) species with Sn-O-P linkages, as evidenced by ¹¹⁹Sn and ³¹P NMR spectroscopy, electrospray mass spectrometry, and conductivity measurements.

Synthesis and reactivity of para-substituted benzoylmethyltellurium(II and IV) compounds: observation of intermolecular C-H-O hydrogen bonding in the crystal structure of (p-MeOC6H4COCH2)2TeBr2

Bis(p-substituted benzoylmethyl)tellurium dibromides, (p-YC₆H₄COCH₂)₂TeBr₂, (y=H (1a), Me (1b), MeO (1c)) can be prepared
either by direct insertion of elemental Te across CRf-Br bonds (where C_Rf refers to α-carbon of a functionalized organic moiety) or by the oxidative addition of bromine to (p-YC₆H₄COCH₂)₂Te (y = H (2a), Me (2b), MeO (2c)). Bis(p-substituted benzoylmethyl)tellurium dichlorides, (p-YC₆H₄COCH₂)₂TeCh (y = H (3a), Me (3b), MeO (3c)), are prepared by the reaction of the bis(p-substituted benzoylmethyl)tellurides 2a--c with S0₂Cl₂, whereas the corresponding diiodides (p-YC₆H₄COCH₂)₂Teh (y = H
(4a), Me (4b), MeO (4c)) can be obtained by the metathetical reaction of la--c with KI, or alternatively, by the oxidative addition of
iodine to 2a--c. The reaction of 2a--c with allyl bromide affords the diorganotellurium dibrornides la--c, rather than the expected
triorganotelluronium bromides. Compounds 1-4 were characterized by elemental analyses, IR spectroscopy, ¹H, ^l3C and ¹²⁵Te
NMR spectroscopy (solution and solid-state) and in case of Ie also by X-ray crystallography. (p-MeOC₆H₄COCH₂)₂TeBr₂ (1c) provides, a rare example, among organotellurium compounds, of a supramolecular architecture, where C-H-O hydrogen bonds appear to be the non-covalent intermolecular associative force that dominates the crystal packing.

Prevalence of the thioamide {···H-N-C=S}2 synthon-solid-state (X-ray crystallography), solution (NMR) and gas-phase (theoretical) structures of O-methyl-N-aryl-thiocarbamides

Structural investigations, i.e. solid-state (X-ray), solution (¹H NMR) and gas-phase (theoretical), on molecules with the general formula MeOC(S)N(H)C₆H₄-4-Y: Y = H (1), NO₂ (2), C(O)Me (3), Cl (4) have shown a general preference for the adoption of an E-conformation about the central C–N bond. Such a conformation allows for the formation of a dimeric hydrogen-bonded {H–N–C=S}₂ synthon as the building block. In the cases of 1–3, additional C–H^...O interactions give rise to the formation of tapes of varying topology. A theoretical analysis shows that the preference for the E-conformation is about the same as the crystal packing stabilisation energy and consistent with this, the compound with Y = C(O)OMe, (5), adopts a Z-conformation in the solid-state that facilitates the formation of N–H^...O, C–H^...O and C–H^...S interactions, leading to a layer structure. Global crystal packing considerations are shown to be imperative in dictating the conformational form of molecules 1–5.

Structure and transport properties in an N,N-substituted pyrrolidinium tetrafluoroborate plastic crystal system

The structure and transport of N-propyl-N-methylpyrrolidinium tetrafluoroborate (P₁₃BF₄) has been investigated over a wide temperature range in consequence to exhibiting properties suitable for potential solid-state superionic electrolyte applications. Prior to melting, the organic salt, P₁₃BF₄, transforms into a plastic crystal phase. Intrinsic conductivity in this solid, phase I (45–65 °C), is comparable to that in the melt (_~10⁻³ S cm⁻¹). Ionic motion and transport properties were investigated by ¹H and ¹¹B nuclear magnetic resonance (NMR) spectroscopy. Pressure-induced plastic flow in this system may accommodate volume changes in device application and to this extent, X-ray diffraction (XRD) has been used. Scanning electron microscopy (SEM) revealed complex surface morphology and lattice imperfections associated with the strong orientational disorder of the plastic state.