Wool industry : a decade of turbulence : an examination of some of the factors contributing to the crisis within Australia's wool industry, and the resulting economic, social and demographic effects on a small isolated rural community

A central issue of this thesis has been an examination of the effects that the current wool crisis has had on the Balmoral district, an area almost solely devoted to the production of wool and wool sheep. Examines the methods being utilised to try to alleviate some of these effects.

Fabric and greasy wool handle, their importance to the Australian wool industry: a review

Handle-related properties of woollen fabrics have been demonstrated to be major factors affecting consumer buying attitudes. Handle is the combination of both textural and compressional attributes. Compressional handle has demonstrated processing advantages in woven and knitted fabrics. The handle of processing lots can be manipulated using a variety of technologies but direct manipulation of textural greasy wool handle pre-processing is still crude. On-farm, there is documented evidence that including handle assessment in a selection index provides additional improvements in genetic gain. However, the assessment of greasy wool handle is based on a tactile evaluation of the wool staple by sheep and wool classers, and its application is affected by a lack of framework that instructs assessors on a standard method of assessment. Once a reliable and repeatable protocol is developed, further understanding of the effect greasy wool handle has on final garment quality will be possible.

The photostability of wool doped with photocatalytic titanium dioxide

Photoyellowing of wool is a serious problem for the wool industry. This study assessed the role of photocatalytic nanocrystalline titanium dioxide (P-25) as a potential antagonist or catalyst in the photoyellowing of wool. Untreated, bleached and bleached and fluorescent-whitened wool slivers were processed into fine wool powders for the purpose of even and intimate mixing with the TiO2 nanoparticles in the solid state. Pure wool and wool/TiO2 mixtures were then compressed into solid discs for a photoyellowing study under simulated sunlight and under UVB and UVC radiations. Yellowness and photo-induced chemiluminescence (PICL) measurements showed that nanocrystalline TiO2 could effectively reduce the rate of photoyellowing by inhibiting free radical generation in doped wool, and that a higher concentration of TiO2 contributed to a lower rate of photooxidation and reduced photoyellowing. Hence nanocrystalline TiO2 acts primarily as a UV absorber on wool in dry conditions and not as a photocatalyst.

Assessment of the pilling propensity of wool knitwear

This study addresses a major issue facing the wool industry - the formation of entangled fibres or pills on wool knitwear. By examining the factors that contribute to the inconsistent pilling results, ways of improving the test procedures have been identified. This will have practical implications for the textile industry.

Controlling and predicting the pilling propensity of knitted wool fabrics

This thesis tackles an important quality issue in the wool industry - the pilling of wool knitwear. Through artificial neural network modelling, the important fibre, yarn and fabric attributes that affect fabric pilling have been identified. A predictive model on fabric pilling has been developed, which will assist the wool industry in the management and control of fabric pilling.

The photostability of wool doped with photocatalytic titanium dioxide nanoparticles

Photoyellowing of wool is a serious problem for the wool industry. This study assessed the role of photocatalytic nanocrystalline titanium dioxide (P-25) as a potential antagonist or catalyst in the photoyellowing of wool. Untreated, bleached and bleached and fluorescent-whitened wool slivers were processed into fine wool powders for the purpose of even and intimate mixing with the TiO2 nanoparticles in the solid state. Pure wool and wool/TiO2 mixtures were then compressed into solid discs for a photoyellowing study under simulated sunlight and under UVB and UVC radiations. Yellowness and photo-induced chemiluminescence (PICL) measurements showed that nanocrystalline TiO2 could effectively reduce the rate of photoyellowing by inhibiting free radical generation in doped wool, and that a higher concentration of TiO2 contributed to a lower rate of photooxidation and reduced photoyellowing. Hence nanocrystalline TiO2 acts primarily as a UV absorber on wool in dry conditions and not as a photocatalyst.

Tweeds, blankets and rugs

Contains a brief history of Geelong. Discusses the development of the wool industry and its importance to the town. A chronological history of Geelong's four mills built 1860-1875. The importance of the textile industry as an employer, especially of women is covered.

Farm-level efficiency and productivity measurement using panel data: wool production in south-west Victoria

In this article we explore some issues surrounding the use of farm-level efficiency and productivity estimates for benchmarking studies. Using an eight-year balanced panel of Victorian wool producers we analyse annual variation between estimates of farm-level technical efficiency derived using Data Envelopment Analysis and Malmquist estimates of Total Factor Productivity. We find that farms change their relative rank in terms of efficiency across years. Also, unlike aggregate studies of Total Factor Productivity, we find at best erratic and modest growth, a worrying result for this industry. However, caution is needed when interpreting these results, and for that matter, benchmarking analysis as currently practised when using frontier estimation techniques like Data Envelopment Analysis.

Adapting ultrasonic assisted wool scouring for industrial application

Scouring is the first stage of wool processing and is essential for determining the quality of fiber. Traditional aqueous scouring is a method that emulsifies and removes contaminants (such as wool grease, suint, and dirt) from the fiber surface; however, it promotes wool felting and is energy and water intensive. This study has shown that modification of the traditional wool scouring line by introducing an ultrasonic device could be a viable alternative for the wool scouring industry. A standard six-bath wool scouring line was retrofitted with two ultrasonic panels working at 80 kHz in bath 2. Scouring was carried out in three modes: conventional mode without the transport rake, ultrasonic mode without the transport rake, and conventional mode with the transport rake. Fiber samples after scouring were measured for color index, residual grease content, and residual ash content. Ultrasonic scouring was found to improve removal of grease and ash from the wool fiber. Modifications were proposed for the design of an industrial scouring line including the addition of fiber transport and dunking rollers and number of baths for the installation. © The Author(s) 2014.

Functionality of nano titanium dioxide on textiles with future aspects: focus on wool

The consumption of titanium dioxide in today's world is on the increase. As the most popular nano substance, TiO 2 is used in various industries notably in the textile industry. More and more recently, through a synergistic combination of photocatalytic features of nanoparticles, fabrics with novel properties are produced. Self-cleaning and stability against UV rays as well as chemical media, to name but a few, are among new prominent properties, obtained on textiles. A common subject reported in most studies has been the diverse approaches to immobilize the nanoparticles on the surface of fabrics. Wool is among common textile materials that have undergone numerous processes to be modified. This review intends to bring to light different aspects of application of nano titanium dioxide in the textile industry especially on wool, and also presents a concise overview on the rigorous pieces of research conducted in this realm.