Preparation and characterization on cellulose nanofiber film

In this study, cellulose nanofibers were obtained from wood pulp using a chemo-mechanical method and thin films were made of these cellulose nanofibers. The morphology of the films was studied by scanning electron microscopy (SEM). SEM image analysis revealed that the films were composed of cellulose nanofibers with an average diameter of around 32 nm. Other properties were also characterized, including the degree of crystallinity by X-ray diffraction, chemical bonding by infrared attenuated total reflectance analysis, and thermal properties by differential scanning calorimetry. The foldable, strong, and optically translucent cellulose nanofiber films thus obtained have many potential applications as micro/nano electronic devices, biosensors and filtration media, etc.

Polycyclic aromatic hydrocarbon emission loads and profiles from the burning of locally grown wood species in Victoria, Australia - Some pilot project results

A testing facility for combustion of biomass and sampling of emissions has been established at Deakin University. In this pilot project using this facility, four kinds of locally grown wood species were burned and the particle emissions sampled and analysed for Polycyclic Aromatic Hydrocarbons (PAHs). The selected wood species covering pine, red gum, yellow box and sugar gum, are the most popular domestic fuel wood in Australia. Particulate matter emissions from burning of each load of wood were sampled from the flue using a standard stack emission sampling train. The particle-laden filters were extracted and the .extract analysed to determine PAH concentrations by Gas Chromatographyl Mass Spectrometer (Gc/MS). The sampling was conducted under two different burning conditions with the air inlet of the combustion chamber fully open and with it half open. A suite of 15 PAHs, ranging from naphthalene (C IOHB) to dibenzolahlanthracene (C12H14), were selected for analysis. PAH profiles for the four wood species, under the different burning regimes, have been generated. Some preliminary emission factors for the different wood species have been derived as microgram of summed PAHs (rPAHs) emittedlkilogram of wood burned. Total Particulate Matter (TPM) emission factors were also obtained from gravimetric measurement of the sample filter before and after the combustion. Based on these emission factors, pine displayed the highest level of rPAHs emitted from the combustion of the four wood species, with sugar gum showing the lowest level of rPAHs emission. Emission factors associated with the slow burning condition clearly showed higher l:PAH levels compared to the faster burning condition. During the faster burning condition, red gum and pine show a higher percentage of rPAH to TPM than sugar gum or yellow box. Under the slower burning. the l:PAHlTPM ratio in every case was greater.

Global review of permian Tyloplecta muir-wood and cooper, 1960 (Brachiopoda): morphology, palaeobiogeographical and palaeogeographical implications

A global review of the stratigraphical and geographical distribution of Tyloplecta reveals that the genus ranges in age from Kungurian to Changhsingian (Middle to Late Permian). Tyloplecta first evolved in South China in the Kungurian (late Early Permian). The genus went through its first diversification in the Guadalupian, suffered a major extinction at the end of the Guadalupian, and re-diversified in the Wuchiapingian. T. yangtzeensis persisted into the Changhsingian as the only survivor of the genus involved in the end-Permian mass extinction. Palaeogeographically, South China is not only the centre of origin for the genus but also an area of diversification and evolution. In addition to South China, Tyloplecta has also been recorded from the Far East Russia, Japan, central Thailand, Laos, Cambodia, Qiangtang Terrane of Tibet, Salt Range, Iran, Armenia, Hungary, Yugoslavia, and Slovenia. This geographic spread suggests that Tyloplecta was primarily restricted to the Palaeotethys and is indicative of warm-water palaeoequatorial conditions. Its presence in some of the northeast Asian terranes (e.g., parts of Japan and Far East Russia) and in the Salt Range (Pakistan) and central and north Iran (part of the Cimmerian microcontinents) demonstrate that the genus invaded the middle palaeolatitudinal regions in both hemispheres during the late Middle Permian in response to increased shallow marine biotic communications between Cathaysia in the eastern Palaeotethys and southern Angaraland, and between Cathaysia and Peri-Gondwanaland. The invasion of Tyloplecta (and some other taxa) into the southern shore waters of Angaraland may be explained by assuming ocean surface current connections and close palaeogeographical proximities between the South China, Sino-Korea and Bureya blocks. In comparison, the invasion of Tyloplecta into the Peri-Gondwanaland region is more likely a result of reduced palaeogeographical distance between South China and Peri-Gondwanaland and the appearance of the Cimmerian microcontinents as migratory stepping stones.

Study of polycyclic aromatic hydrocarbons emissions from burning of local wood species in Australia

Four kinds of Australian local wood species were burned in a domestic wood heater installed in a laboratory. The selected wood species include pine, red gum, yellow box and sugar gum, that are the most popular domestic fuel wood in Australia. Particulate matter emissions from burning of each load of wood were sampled isokinetically on filter media from the flue by standard stack emission sampling train. The particle laden filters then went for Gas Chromatography/ Mass Spectrometer (GC/MS) analysis to determine polycyclic aromatic hydrocarbons (PAHs) concentrations. The sampling was conducted under two different burning conditions – air inlet of the combustion chamber fully open and half open. Approximately 15 types of PAHs were detected. Emission factors were derived as microgram of PAHs /kg of wood burned. Total particulate emission factors were also obtained from gravimetric measurement before and after the sampling. PAH emission profiles for four species were generated from the results. Comparisons of emission factors have been conducted among different species of wood, as well as under different burning conditions, ie. fast burning and slowing burning. According to the derived emission factors, pine displayed the highest level of PAHs among the four species, followed by red gum and yellow box, whereas sugar gum showed the lowest level of PAHs. Emission factors were compared between each type of wood under two different burning conditions, the slow burning condition, which was air inlet half open, clearly showed higher PAH levels compared to the fast burning condition. Total PAH fractions on particulate matter were calculated and compared among wood types under two burning conditions. During the fast burning condition, red gum and pine have the higher percentage of PAH to total particulate matter emission than sugar gum and yellow box. When changed to slow burning, the PAH fraction on particulate matter are all increased with sugar gum having the largest increase.

Embodied energy in buildings : wood versus concrete - reply to Börjesson and Gustavsson

We analyse the wood and concrete designs of the Wälludden building described by Börjesson et al. (Energy Policy 28 (2000) 575) in terms of their embodied energy, employing an environmentally extended input–output framework in a tiered hybrid life-cycle assessment, and in a structural path analysis. We illustrate the complexity of the inter-industry supply chains underlying the upstream energy requirements for the building options, and demonstrate that higher-order inputs are difficult to capture in a conventional process analysis. Our calculations show that Börjesson and Gustavsson's estimates of energy requirements and greenhouse gas emissions are underestimated by a factor of about 2, and that corresponding greenhouse gas balances are positive at about 30 t C-eq. Nevertheless, Börjesson and Gustavsson's general result—the concrete-framed building causing higher emissions—still holds.

Thermal evaluation of a low cost wood burner

Small-scale producers of dried products in rural areas of developing countries must often rely on sun drying to dry their crops, but this can be unreliable and produce an inferior product. There is therefore a need for simple and inexpensive combustion devices that can be fabricated and used locally. A wood burner has been constructed from a "200 litre" steel drum and has then been evaluated experimentally. The thermal efficiency of the burner was found to be 31% in two trials. An energy balance, calculated for three trials, was within + 16%. Approximately one third of the energy available in the wood was lost in the flue gases, either as sensible heat or unburned volatile gases. Excess combustion air through the burner was calculated and measured to be approximately 400% of the stoichiometric requirements. A significant amount of energy was required to heat the thermal mass surrounding the burner, indicating that a lightweight insulated structure would be more suitable in most circumstances.

‘CHOU GAGS CRITICS IN BANDOENG or how the media framed Premier Zhou Enlai at the Bandung Conference, 1955

At the Asian-African Conference at Bandung, Indonesia, in April 1955, the world's press concentrated its gaze on Premier Zhou Enlai of the People's Republic of China. Premier Zhou's every gesture, interaction and statement was scrutinized for evidence that his motivations at Bandung were antagonistic to Western interests. This preoccupation with the motivations of the Chinese was, however, no new phenomenon. By 1955, literary tropes of the ‘Yellow Peril’ had been firmly established in the Western imagination and, after 1949, almost seamlessly made their transition into fears of infiltrating communist Chinese ‘Reds’.

The first half of this paper explores the historical roots of the West's perceptions of the Chinese, through the literary works of Daniel Defoe to the pulp fiction of Sax Rohmer's Dr Fu Manchu series, which ran from 1917 to 1959. It then examines how this negative template was mobilised by the print media at the height of the Cold War to characterize Premier Zhou Enlai, not only as untrustworthy, but also as antagonistically anti-Western. This reading of representations of Premier Zhou at Bandung, as well as the literary tropes propagated in support of eighteenth and nineteenth-century imperial expansion, exposes a history of Western (mis)interpretations of China, and sheds light upon the media network's role in constructing a Chinese enemy in the mid-1950s.

Determination of resin acids in pulp mill effluent and receiving waters by high performance liquid chromatography

Resin acids are reported to be of major toxicological importance in pulp mill effluents for Rainbow Trout. Their determination, using a high performance liquid chromatographic method, is described.