An evaluation of the suitability of selected waste products in feeds for three fish species

Five types of aquatic food industry waste products (carp offal, carp roe, fish frames, trout offal and surimi processing waste) together with fish meal were evaluated for their suitability as potential fish meal replacements, partially or wholly, in diets for three species (rainbow trout, Murray cod and shortfin eel) cultured in Australia, using a number of criteria.

The proximate composition of the ingredients on a dry matter basis including protein content, lipid and ash, varied considerably. The essential amino acid (EAA) contents of the waste products and fish meal decreased in the order: carp roe > fish meal > carp offal > 'surimi' processing waste > fish frames > trout offal. The results of cluster analysis of A/E ratios of waste products and fish whole body fell within three clusters. The EAAI of whole body tissue of Murray cod, rainbow trout and Australian shortfin eel however, were closest to fish meal, followed by fish frame waste and/or 'surimi' waste. The results on A/E ratios and EAAI did not conform to the raw data on TAA and EAA. Therefore, the study emphasizes the need to have a multi-prong approach to determine the suitability of ingredients for incorporation into fish feeds.

Chemical and physical speciation of arsenic in a small pond receiving gold mine waste effluent

The chemical and physical speciation of arsenic in a small pond that receives wastewater from a gold mine operation in western Victoria, Australia was studied using differential pulse polarography. By using different sample pretreatments, distinction between the physical states (dissolved or particulate As), between the oxidation states (As(III) or As(V)), and between the degrees of lability (labile or strongly bound) was achieved. The results are interpreted in terms of the physicochemical properties with reference to the use of the pond as a settlement dam for gold mining effluent. The speciation of arsenic was found to vary markedly with the physicochemical properties of the water. A model for the behavior of arsenic in the pond is proposed.

An analysis of factors influencing waste minimisation and use of recycled materials for the construction of residential buildings

Residential building construction activities, whether it is new build, repair or maintenance, consumes a large amount of natural resources. This has a negative impact on the environment in the form depleting natural resources, increasing waste production and pollution. Previous research has identified the benefits of preventing or reducing material waste, mainly in terms of the limited available space for waste disposal, and escalating costs associated with landfills, waste management and disposal and their impact on a  building company's profitability. There has however been little development internationally of innovative waste management strategies aimed at reducing the resource requirement of the construction process. The authors contend that embodied energy is a useful indicator of resource value. Using data provided by a regional high-volume residential builder in the State of Victoria, Australia, this paper identifies the various types of waste that are generated from the construction of a typical standard house. It was found that in this particular case, wasted amounts of materials were less than those found previously by others for cases in capital cities (5-10 per cent), suggesting that waste minimisation strategies are successfully being implemented. Cost and embodied energy savings from using materials with recycled content are potentially more beneficial in terms of embodied energy and resource depletion than waste minimisation strategies.

Waste production simulation for building deconstruction projects

The recently erected concept of building deconstruction has significantly promoted building components and materials reuse and recycling where building is carefully dismantled into reusable parts. Current research and practices of building deconstruction mainly focus on issues of process before and during the deconstruction such as hazardous material detection, deconstruction design and deconstruction technology. The issues after the deconstruction project are rarely considered. Waste reuse and recycling are enabled through deconstruction yet not practically achieved, and especially the demands of waste building components and materials are hard to appear and match the actual waste production in a building deconstruction project. To deal with this awkward situation, the waste production needs to be conducted in a demand-oriented way. It needs to be thoughtfully planned and scheduled prior to the physical deconstruction as an essential portion of deconstruction project planning and scheduling. Furthermore, the relationship between waste production and structural characteristics of the building creates a serious consideration affecting a deconstruction plan. As a result, a waste production simulation will facilitate waste reuse and recycling in a deconstruction project. It serves as a crucial section of deconstruction planning and design. This research aims to describe the concept of waste production simulation and investigate various management and technical aspects of waste production simulation for building deconstruction projects.

Electronic waste exchange for just-in-time building demolition

Waste exchange is as a facilitator for construction and demolition waste deduction by reuse and recycling in construction projects. The just-in-time philosophy, which has been well cultivated in the manufacturing industry, is highly adoptable for demolition projects. Particularly, waste exchange that is usually performed after the actual demolition process can be shifted forward so that waste inventory from demolition is eliminated or reduced to facilitate waste reuse and recycling. A web-based waste exchange system is an ideal platform to enable communications among project participants before a demolition project commences so that waste materials can be sold before they are produced. Therefore, the productivity of the demolition project could be improved. This research paper aims to investigate and analyse the adoption of just-in-time philosophy in building demolition project management. It also describes the development of the proposed web-based waste exchange system that implements just-in-time demolition in detail, including its functionalities, information flows and major components.

Managerialism and the arts : a complete and utter bloody waste of time

Managerialism has been adopted with alacrity by Australian government agencies across multiple sectors. Studies of managerialism in concept and practice have been undertaken in some public sectors but not from a critical management perspective. This position paper examines the contribution of organization theory to an understanding of managerialism. Here we challenge the appropriateness and effectiveness of new managerialism generally, and for the arts in particular, through an analysis of conflict between an Artistic Director, General Manager and Board in a key Australian community arts organization. We call for further research into the appropriateness of management theory and practice for the arts; and seek better ways of managing our cultural capital.

RFID-based real-time smart waste management system

In an environmental context, the use of RFID (radio frequency identification) and load cell sensor technology can be employed for not only bringing down waste management costs, but also to facilitate automating and streamlining waste (e.g., garbage, recycling, and green) identification and weight measurement processes for designing smart waste management systems. In this paper, we outline a RFID and sensor model for designing a system in real-time waste management. An application of the architecture is described in the area of RFID and sensor based automatic waste identity, weight, and stolen bins identification system (WIWSBIS).

The use of artificial biofilms to strip nutrients from an industrial smelters waste water under conditions of low temperature and high pH

The Victorian Environment Protection Authority (EPA) has identified Alcoa’s Point Henry aluminium smelter as being a major source of recognized pollutant input due to its disposal of effluent into Corio Bay. Historically, the water quality parameters that have most often exceeded Point Henry’s EPA limits have been pH and suspended solids from the smelter’s discharge points. These waste water discharges also experience high nitrogen and phosphorus concentrations which result in algal blooms that occur at the onset of warm weather. The main hypothesis of this study was that “prevention of algal blooming with the onset of warm weather by removal of nutrients during the cooler months, and continued removal thereafter, is better than curing the problems chemically”. Biofilms have been used to remove nutrients from waste waters, but not under the conditions experienced at Point Henry. The aim of this study, therefore, was to determine if significant biofilm growth would be observed on floating structures suspended in the Point Henry waste water stream during the cooler, winter months of the year. Statistically significant biofilm growth occurred on all suspended structures in all discharge ponds during the winter and early spring of 2000. The use of suspended structures, such as AquaMatTM, as an artificial substrate to attract and support periphyton and bacterial communities (biofilms), which are then able to out-compete phytoplankton communities for available nutrients, is therefore a viable option for the Point Henry smelter. However, further research on the competitive performance of biofilms in the Point Henry ponds during the summer months is required before adequate biofilm management strategies can be developed.