Australian SMEs waste to landfill

Landfill waste has a negative impact on the environment and small and medium sized enterprises (SMEs) are believed to be significant contributors. There is little government or scholarly research, however, quantifying the collective volume of waste SMEs send to landfill. Where studies do exist they measure total volumes (landfill and recycling combined) and/or do not distinguish between specific waste streams (e.g. wood) and subcategories (e.g. dust). This paper contributes to knowledge by giving insight into the collective volume of waste of 404 SMEs, reconceptualising SME waste into subcategories and by measuring landfill volumes. It presents findings from these 404 Australian SMEs which found that, in descending order, cardboard, paper, plastic wrap, wood dust and particleboard were the subcategories these SMEs sent to landfill in the greatest volumes. It also argues that this reconceptualisation, and associated data collection protocols, have the potential to enable scholars and policy makers to determine the waste subcategories to which SMEs contribute most, formulate targeted interventions and research or evaluate environmental outcomes. © 2014 © 2014 Environment Institute of Australia and New Zealand Inc.

An evaluation of the suitability of selected waste products in feeds for three fish species

Five types of aquatic food industry waste products (carp offal, carp roe, fish frames, trout offal and surimi processing waste) together with fish meal were evaluated for their suitability as potential fish meal replacements, partially or wholly, in diets for three species (rainbow trout, Murray cod and shortfin eel) cultured in Australia, using a number of criteria.

The proximate composition of the ingredients on a dry matter basis including protein content, lipid and ash, varied considerably. The essential amino acid (EAA) contents of the waste products and fish meal decreased in the order: carp roe > fish meal > carp offal > 'surimi' processing waste > fish frames > trout offal. The results of cluster analysis of A/E ratios of waste products and fish whole body fell within three clusters. The EAAI of whole body tissue of Murray cod, rainbow trout and Australian shortfin eel however, were closest to fish meal, followed by fish frame waste and/or 'surimi' waste. The results on A/E ratios and EAAI did not conform to the raw data on TAA and EAA. Therefore, the study emphasizes the need to have a multi-prong approach to determine the suitability of ingredients for incorporation into fish feeds.

Chemical and physical speciation of arsenic in a small pond receiving gold mine waste effluent

The chemical and physical speciation of arsenic in a small pond that receives wastewater from a gold mine operation in western Victoria, Australia was studied using differential pulse polarography. By using different sample pretreatments, distinction between the physical states (dissolved or particulate As), between the oxidation states (As(III) or As(V)), and between the degrees of lability (labile or strongly bound) was achieved. The results are interpreted in terms of the physicochemical properties with reference to the use of the pond as a settlement dam for gold mining effluent. The speciation of arsenic was found to vary markedly with the physicochemical properties of the water. A model for the behavior of arsenic in the pond is proposed.

An analysis of factors influencing waste minimisation and use of recycled materials for the construction of residential buildings

Residential building construction activities, whether it is new build, repair or maintenance, consumes a large amount of natural resources. This has a negative impact on the environment in the form depleting natural resources, increasing waste production and pollution. Previous research has identified the benefits of preventing or reducing material waste, mainly in terms of the limited available space for waste disposal, and escalating costs associated with landfills, waste management and disposal and their impact on a  building company's profitability. There has however been little development internationally of innovative waste management strategies aimed at reducing the resource requirement of the construction process. The authors contend that embodied energy is a useful indicator of resource value. Using data provided by a regional high-volume residential builder in the State of Victoria, Australia, this paper identifies the various types of waste that are generated from the construction of a typical standard house. It was found that in this particular case, wasted amounts of materials were less than those found previously by others for cases in capital cities (5-10 per cent), suggesting that waste minimisation strategies are successfully being implemented. Cost and embodied energy savings from using materials with recycled content are potentially more beneficial in terms of embodied energy and resource depletion than waste minimisation strategies.

Reduction of metal leaching in brown coal fly ash using geopolymers

Current regulations classify fly ash as a prescribed waste and prohibit its disposal in regular landfill. Treatment of the fly ash can reduce the leach rate of metals, and allow it to be disposed in less prescribed landfill. A geopolymer matrix was investigated as a potential stabilisation method for brown coal fly ash. Precipitator fly ash was obtained from electrostatic precipitators and leached fly ash was collected from ash disposal ponds, and leaching tests were conducted on both types of geopolymer stabilised fly ashes. The ratio of fly ash to geopolymer was varied to determine the effects of different compositions on leaching rates.

Using inorganic polymer to reduce leach rates of metals from brown coal fly ash

The burning of brown coal for electricity generation produces thousands of tonnes of fly ash each year. Treatment of the fly ash can reduce leach rates of metals and allow it to be disposed in less prescribed landfill. A geopolymer matrix was investigated as a potential stabilisation method for fly ash obtained from electrostatic precipitators and ash disposal ponds. The ratio of fly ash and geopolymer was varied to determine the effects of different compositions on leaching rates. The major element leachate concentrations obtained from pond ash were lower than that of precipitator fly ash. Conversely, precipitator ash-geopolymers were better for trace heavy metal stabilisation. Effective reduction of elemental concentrations in the leachate has been achieved, particularly for calcium, arsenic, selenium, strontium and barium. Scanning electron microscopy revealed the distribution of metals originated from fly ash and from added geopolymer material. It also showed that some elements are leached from ash particles to the geopolymer phase and others remained as undissolved particles. Qualitative analysis showed that fly ash particles interacted with the geopolymers phase through surface reactions.

A framework for material management in the building demolition industry

Conventional mechanical building demolition produces numerous solid wastes, most of which are sent to landfill directly and severely degrade the living environment. Just-in-time building demolition has been developed recently with a management strategy to facilitate waste reuse. Procurement management plays a significant role in just-in-time building demolition. In particular, the demolition tendering selection needs to consider contractors' environmental performance in addition to project costs. Moreover, the flow of building materials in a demolition project may be regarded as a supply chain involving the building owner, demolition contractor and material demanders. This paper develops a framework for salvaged materials management in the emerging demolition industry. The research is to promote the recycling and reuse of building demolition materials in order to achieve better environmental and financial performance for building demolition projects.

Pieces of silver : examples of the economic impact and management of the silver gull (Larus novaehollandiae) in Melbourne, Australia

Like a number of gull species, the silver gull Larus novaehollandiae has expanded its population in response to human food subsidy. The major anthropogenic food source is food waste at rubbish tips. Other sources of human food waste are also exploited. Many problems result from the activities of these birds, including human health and safety, economic impacts, and effects on the conservation of other species. My study examines aspects of the economic impacts of the silver gull on the human community of the Greater Melbourne Area comprising approximately 4065 km2 (1569 square miles). My data collection method involves identifying sites where problems have been experienced and completing questionnaires during face to face interviews with the managers of those sites. Data collected at this early stage of the study demonstrate that there are significant, quantifiable economic impacts associated with the superabundance of the silver gull in this area. Other impacts, such as reduced amenity and potential health hazards are equally real but more difficult to quantify. Costs include damage to structures and products, damage prevention measures, and loss of production. Information about the costs of these problems will be presented to the relevant landfill management authorities to encourage them to consider alternative means of disposing of putrescible waste, rather than by open landfill disposal, because even current best practice management of open landfill sites (rubbish tips) provides ample opportunity for silver gulls and certain other bird species to exploit this food source. Controlling access by the silver gull to food at rubbish tips would be an important first step in managing the population of this species.

Concepts, models and analyses of electronic demolition of buildings

The demolition of building structures produces enormous amounts of waste materials. In most current demolition projects, a great number of demolished materials are directly sent to landfill after their primary usage due to the difficulties in finding their next usage immediately. At the same time, because of limited supply of second-hand materials, new and high quality materials are used in construction projects whose design standards can be fitted using the secondary or used materials. However, this is an inefficient method to reduce waste because off the flow nature of the current waste-exchange systems and the demolition procedure. The recent concept using deconstruction rather than destruction for demolishing a constructed facility fails to achieve widespread understanding or acceptance due to various practical limitations. In this paper, for the purpose of envisaging the deconstruction implementations in practice and promoting cascading usages of construction materials, the concept of electronic demolition (e-Demotion, eDemolition) is put forward for the first time. E-demolition is a virtual demolition approach by which the demolition information, progress and outputs are operated before the physical demolition. Furthermore, the authors set up the essential models to implement electronic demolition of buildings from the viewpoints of demolition progress, business, and information. Each model is demonstrated in accord with the conventional demolition practice and subject to the ideal deconstruction implementation. Following the electronic demolition of a real project, the physical demolition can be anticipated with a minimum of construction waste emission.

Using geopolymer to minimise metals leaching from brown coal fly ash

Fly ash is generated from combustion of brown coal in power stations. The majority of fly ash is removed by electrostatic precipitators (ESP) and finally disposed into the landfill as prescribed wastes. A method was studied to add clay materials to the brown coal fly ash in order to form the so-called geopolymer network, which is effective at stopping the metal contents from leaching, and have minimum impact to the environment. The experiments were conducted parallel on leached fly ash and dry precipitator fly ash. The ratios of fly ash and added clay materials were varied to determine the effects of different compositions on leaching rates. Both X-ray diffraction analysis and scanning electron microscopy images showed that as the percentage of fly ash was increased, the formation of geopolymer is reduced. Eighteen metals and heavy metals were targeted during the leaching tests and the leachate samples were analysed using ICP-AES and ICP-MS. It was found that the reduction of metal leaching was achieved by adding up to 60% of fly ash to form the geopolymer like structure. Significant reductions were observed for calcium, strontium and barium. Leached fly ash achieved better stabilisation than dry precipitator fly ash for major elements. It's hard to quantify its effects on trace metals leaching due to their ultra low concentration in the fly ash. The samples spiked with trace metals of lead, zinc, mercury and barium showed remarkable reduction in leaching.

Web enabled just-in-time salvaged material management for demolition projects

The demolition activities of buildings produce numerous environmental pressures as a large proportion of demolition waste materials are sent to landfill directly in many projects. Web-based waste exchange systems could provide right solutions for releasing these pressures. Because the approaches adopted in current waste exchange systems are inefficient, these systems cannot generate waste exchange, not achieving their final goal, environmental protection. The Just-in-time (JIT) philosophy has been applied in the manufacture industry for decades and it is proven to be effective to eliminate or minimise inventory during production. This research aims to adopt the JIT philosophy into a demolition project management informapon system so that the system is more efficient in handling waste exchange. The system structure, key components and Just-in-time adoption are proposed and identified. Finally, a proto typed system is demonstrated.

Waste production simulation for building deconstruction projects

The recently erected concept of building deconstruction has significantly promoted building components and materials reuse and recycling where building is carefully dismantled into reusable parts. Current research and practices of building deconstruction mainly focus on issues of process before and during the deconstruction such as hazardous material detection, deconstruction design and deconstruction technology. The issues after the deconstruction project are rarely considered. Waste reuse and recycling are enabled through deconstruction yet not practically achieved, and especially the demands of waste building components and materials are hard to appear and match the actual waste production in a building deconstruction project. To deal with this awkward situation, the waste production needs to be conducted in a demand-oriented way. It needs to be thoughtfully planned and scheduled prior to the physical deconstruction as an essential portion of deconstruction project planning and scheduling. Furthermore, the relationship between waste production and structural characteristics of the building creates a serious consideration affecting a deconstruction plan. As a result, a waste production simulation will facilitate waste reuse and recycling in a deconstruction project. It serves as a crucial section of deconstruction planning and design. This research aims to describe the concept of waste production simulation and investigate various management and technical aspects of waste production simulation for building deconstruction projects.