Performance of constructed evaporation ponds for disposal of smelter waster water: a case study at Portland Aluminum, Victoria, Australia

The construction of evaporative ponds and wetlands for the disposal of waste water high in ionic concentrations is a waste disposal strategy currently considered by many industries. However, the design, construction and management of these ponds and wetlands are not straightforward as complex chemical interactions result in both spatial and temporal changes in water quality. The effects of evaporation and drainage on the water quality in two constructed ponds, an adjacent man-made wetland and local groundwater at Portland Aluminium were investigated. The minimum volume of water entering the ponds during the study period was 0.96±0.16 ML per month. The predicted theoretical evaporative capacity of the two ponds was calculated to be 0.30±0.07 ML per month. More water enters the ponds than it is theoretically possible to evaporate under the ambient weather conditions at Portland, yet the ponds do not overflow, suggesting percolation through the pond lining. No spatial differences in solute concentrations (fluoride, sulphate, bicarbonate, carbonate, sodium, potassium, calcium, and magnesium ions) were found within the waters of either pond, although temporal differences were apparent. The results support the conclusion that the ponds are not impermeable, and that much of the waste water entering the ponds is being lost through seepage. The impacts on local groundwater chemistry of this seepage are addressed. Significant correlations exist between solute presence within and between the ponds, wetland and groundwater. Fluoride and sulphate concentrations were significantly higher in pond waters throughout the duration of the experiment. Pond sediments revealed a high degree of spatial and temporal heterogeneity in the concentration of all monitored ions resulting from the chemical heterogeneity of the material making up the pond linings. Adsorption isotherms for fluoride indicate that the adsorption capacity of the pond linings remains high for this ion. Implications for the management of waste water by this strategy are discussed.

An analysis of factors influencing waste minimisation and use of recycled materials for the construction of residential buildings

Residential building construction activities, whether it is new build, repair or maintenance, consumes a large amount of natural resources. This has a negative impact on the environment in the form depleting natural resources, increasing waste production and pollution. Previous research has identified the benefits of preventing or reducing material waste, mainly in terms of the limited available space for waste disposal, and escalating costs associated with landfills, waste management and disposal and their impact on a  building company's profitability. There has however been little development internationally of innovative waste management strategies aimed at reducing the resource requirement of the construction process. The authors contend that embodied energy is a useful indicator of resource value. Using data provided by a regional high-volume residential builder in the State of Victoria, Australia, this paper identifies the various types of waste that are generated from the construction of a typical standard house. It was found that in this particular case, wasted amounts of materials were less than those found previously by others for cases in capital cities (5-10 per cent), suggesting that waste minimisation strategies are successfully being implemented. Cost and embodied energy savings from using materials with recycled content are potentially more beneficial in terms of embodied energy and resource depletion than waste minimisation strategies.

Clinical waste management in Victorian hospitals

This project for the Doctor of Technology provides a significant contribution to the understanding of healthcare waste management in Victoria and worldwide. The thesis describes approaches to enable healthcare facilities to identify factors that contribute to waste generation and resulting impacts on the environment in order to reduce them.

Place-taking and place-making in waterfront renewal, Australia

Waterfront and port zones around the world have long been subject to change, as they have variously been used for trade, waste disposal, leisure and most recently for urban re-imagining, spectacle and lifestyle housing. While such a narrative has been well explored in the urban studies literature, another element of port development – its relation to imperialism and colonisation has not. In the case of colonized countries – such as Australia, but also Canada, the United States and across Africa and Asia – waterfronts were often the entry points of imperial occupancy and key sites for colonial trade and industry. Contestation over how to value and use these sites is integral to their constitution as landscapes, as place taking becomes part of their place making. It will be argued, using case studies drawn from Adelaide and Melbourne in Australia that these sites register a range of culturally-specific imprints connected to the colonisation process. For Indigenous Australians, sea country was indistinguishable from land, but subsequent assessments have seen land demarcated from the ocean, water defiled and obliterated, slums designated but then redeveloped and the Indigenous present rendered benign through its symbolic re-presentation. This post-colonial reading will correlate the divide between land and water with those who have the imperial and class power to define this elemental boundary to add a new dimension to studies of waterfronts.

Medication knowledge and self-management by people with type 2 diabetes

Objective: To explore medication knowledge and self management practices of people with type 2 diabetes.

Design: A one-shot cross sectional study using in-depth interviews and participant observation.

Setting: Diabetes outpatient education centre of a university teaching hospital.

Subjects: People with type 2 diabetes, n=30, 17 males and 13 females, age range 33-84, from a range of ethnic groups.

Outcome measures: Ability to state name, main actions and when to take medicines. Performance of specific medication-related tasks; opening bottles and packs, breaking tablets in half, administering insulin, and testing blood glucose.

Results: Average medication use > or = 10 years. Respondents were taking 86 different medicines, mean 7 +/- 2.97 SD. Dose frequency included two, three and four times per day. All respondents had > or = 2 diabetic complications +/- other comorbidities. The majority (93%) were informed about how and when to take their medicines, but only 37% were given information about side effects and 17% were given all possible seven items of information. Younger respondents received more information than older respondents. Older respondents had difficulty opening bottles and breaking tablets in half. Twenty per cent regularly forgot to take their medicines. Increasing medication costs was one reason for stopping medicines or reducing the dose or dose interval. The majority tested their blood glucose but did not control test their meters and 33% placed used sharps directly into the rubbish.

Conclusion: Polypharmacy was common. Medication knowledge and self management were inadequate and could lead to adverse events.

The impact of small business on the environment

Objectives: Small businesses are estimated to contribute a significant proportion of global pollution, yet there is little empirical evidence to support this claim. The main aim of this research was to conduct an exploratory analysis of small business’s environmental impact in terms of waste, water and energy.

Prior work: Due to the negative impact small businesses are reported to have on the environment, their disengagement in environmental management practices has caused international concern. Much of the literature has concentrated on identifying the barriers and drivers of small business engagement. Little empirical work being conducted on the actual impact of they have on the environment or on the influence of the local context on their environmental practices.

Approach: A survey was developed and distributed to 466 small businesses within two light industrial areas in Perth Western Australia, which achieved a response rate of 87%. This survey will be replicated after a 12 month intervention is conducted. The two light industrial areas were selected as their Local Government Authorities are looking for businesses within their boundaries to improve their environmental performance.

Results: Initial results suggest that the small businesses do have a considerable impact on the environment in terms of waste disposal. Moreover, their environmental management practices concerning waste, energy and water were found to differ depending on the local contexts in which the small businesses operate.

Implications: As small businesses are both economically and socially important to all major industrialised nations, empirical research that provides evidence of their impact on the environment is critical. The implication here is that if the context in which these businesses operate influences the practices employed, developing strategies that acknowledge the influence and consequences of context may be more effective than those currently available. Differences identified within practices suggest that greater awareness and education is needed on water management than energy or waste, as this is the area where small business owner-managers have shown they have less knowledge and/or active engagement.

Value: This research is valuable in three ways. First, it adds to the knowledge of small business impact on the environment. Second, it identifies that context may be a factor that needs to be considered when developing strategies to engage small businesses in environmental management. Finally, it shows that the environmental management of water is the least well established environmental priority of small businesses at this time.

Technical developments for building demolition management

Environmentally friendly demolition methods such as deconstruction are currently not widely accepted due to a lack of economic motivation for demolition contractors. This research aims to economically analyse demolition techniques, and to adopt E-commerce into demolition project management in order to enable a higher level of material reuse and recycling.

Determination of resin acids in pulp mill effluent and receiving waters by high performance liquid chromatography

Resin acids are reported to be of major toxicological importance in pulp mill effluents for Rainbow Trout. Their determination, using a high performance liquid chromatographic method, is described.

Investigation of an effluent treatment system for an integrated textile facility

Available effluent treatment systems to treat wool scour and dyehouse wastewaters were investigated. Electroflotation was found to be the most practicable treatment process as it had the ability to reduce the contaminant load in wastewaters. The quality of the treated wastewaters was then suitable for disposal to sewer or reuse on site.

Controlled field studies on soil aquifer treatment in a constructed coastal sandfill

A controlled artificial recharge experiment was conducted to investigate the effect of soil aquifer treatment during percolation of secondary and tertiary (ultrafiltered) treated wastewater through the shallow vadoze zone of a newly constructed coastal sandfill. The sandfill is a reclaimed land constructed from marine sand dredged from the seabed. To obtain 1-D flow, a stainless steel column was driven to a depth of 2.5 m, penetrating the phreatic surface. Wastewater was percolated through the column under fully-saturated and unsaturated conditions. Infiltration rates, dissolved organic carbon (DOC) and ultra-violet absorption (UVA) were monitored. The wastewaters were recharged at similar infiltration rates of approximately 5.5 m/day and 3.5 m/day under fully-saturated and unsaturated conditions, respectively. In both cases, clogging occurred 40 days after the start of recharge, under saturated conditions. For secondary treated wastewater, DOC concentration (mg/l) reduced by 28% and 13% under unsaturated and saturated conditions, respectively. The corresponding UVA reduction was 19.4% and 14.1%. Similar reductions in DOC were observed for the tertiary treated wastewater; however, the reduction in UVA was higher; 28% and 22% under unsaturated and saturated conditions, respectively. On an mass removal (mg/m(2) DOC) basis, DOC reduction appeared to be more significant under unsaturated conditions. This is attributed to the presence of interstitial oxygen.

Urban stormwater inputs to an adapted coastal wetland : role in water treatment and impacts on wetland biota

The Lake Pertobe wetland system is a semi-natural wetland that has been modified primarily for recreational use. However, this lake system receives stormwater from much of the central business district of Warrnambool City (Victoria, Australia) and serves as a buffer zone between the stormwater system and the Merri River and Merri Marine Sanctuary. This work considers the impact of stormwater inputs on Lake Pertobe and the effectiveness of the lake in protecting the associated marine sanctuary. Sediment contaminants (including heavy metals and polycyclic aromatic hydrocarbons (PAHs)) and water quality parameters within the lake, groundwater and stormwater system were measured. Water quality parameters were highly variable between stormwater drains and rain events. Suspended solids rapidly settled along open drains and shortly after entering the lake. Groundwater inputs increased both salinity and dissolved nitrogen in some stormwater drains. Some evidence of bioaccumulation of metals in the food chain was identified and sediment concentrations of several PAHs were very high. The lake acted as a sink for PAHs and some metals and reductions in Escherichia coli, biological oxygen demand and total phosphorus were observed, affording some protection to the associated marine sanctuary. Nutrient retention was inadequate overall and it was identified that managing the lake primarily as a recreational facility impacted on the effectiveness of stormwater treatment in the system.

Health systems change in 2010

Whilst health science, epidemiology and public health developments have forged enormous progress in understanding, prevention and cure in the health care area we still appear to lack the motivation to tackle the fundamental antecedents of many of our emerging population-based community health problems; the prevention of chronic illness being a prime example.

In spite of much progress in the area of health science, the social, economic and evolutionary forces that cast our physical being in the world still remain poorly understood or accepted in the health care arena. However, if our health care systems are to be manageable and sustainable in the future, these wider antecedents of our health status and wellbeing must be factored more fundamentally in to our management models with more effort being put into preventing lifestyle related chronic illnesses than is currently the case.

As in the past where public health infrastructure innovations such as running water and efficient waste disposal systems served to add greatly to the wellbeing of individuals and communities, we now need to make similar efforts to control preventable illnesses such as metabolic syndrome, type 2 diabetes and lifestyle related cardio-vascular disease at their source rather than waiting until the manifestation of these conditions require major medical and chemical intervention and management before we act. Our young people are at risk of early onset chronic conditions as a result of their emerging sedentary lifestyles, un-healthy dietary habits and health related behaviours, yet we continue to concentrate our health management effort on managing those with existing chronic conditions while leaving younger generations with lifestyle practices and behaviours that pre-dispose individuals to developing chronic illness earlier and earlier in their lives.

It is time we took notice of these emerging trends and began expending more effort to prevent what are essentially lifestyle related illnesses that can be eliminated before they become endemic. By concentrating more upon the social and environmental factors affecting our illness profiles as well as upon dealing more effectively with those who are already suffering from chronic illness we will reduce the need for major end-stage interventions and alleviate the impact and cost of early onset chronic disease. To achieve this new population health vision in Australia at least, we will not only need to utilize the new government funding structures more effectively; those structures that support coordination and more effective management of care, but also take a much broader, environmental and social view of cause and effect in relation to the health of populations.

Major factors affecting waste generation on construction sites in Iran

Construction and demolition (C&D) waste account for a large share of total solid waste sent to the environment. As a result, effective C&D waste management has been treated as one of the available avenues towards sustainable development. Yet, C&D waste management within the Iranian construction industry has been literally overlooked by investigators. As one of the first studies in Iran, the main causes of generating C&D waste on construction projects have been identified through a review of literature. Afterwards, the list has been subjected to the scrutiny of 101 experts in the field deploying a questionnaire survey. The findings revealed that important causes of C&D waste generation on construction sites were all associated with lack of skills and experience of construction workers and lack of awareness of the concept of waste and values of construction materials. No discrepancy in terms of causes of waste generation was observed among different tiers of construction companies in the Iranian construction industry. The paper concludes with providing a number of guidelines to address the issues as identified for Iran and other developing countries suffering from the same problems.