Recent developments in carbon nanotube membranes for water purification and gas separation

Carbon nanotubes (CNTs) are nanoscale cylinders of graphene with exceptional properties such as high mechanical strength, high aspect ratio and large specific surface area. To exploit these properties for membranes, macroscopic structures need to be designed with controlled porosity and pore size. This manuscript reviews recent progress on two such structures: (i) CNT Bucky-papers, a non-woven, paper like structure of randomly entangled CNTs, and (ii) isoporous CNT membranes, where the hollow CNT interior acts as a membrane pore. The construction of these two types of membranes will be discussed, characterization and permeance results compared, and some promising applications presented.

Life expectancy of rigid gas permeable and high water content contact lenses

Purpose: The purpose of this study was to evaluate the life expectancy of various rigid gas permeable (RGP) lens materials used on a daily wear basis and to compare these results with the life expectancy of a matched group of soft lens wearers.

Methods: We retrospectively analyzed the records of 600 contact lens wearing patients (300 soft contact lens users and 300 RGP lens users) fit between September 1987 and September 1994. None of the subjects wore lenses on a planned replacement system. For the purposes of the study, RGP lenses were divided into three groups: <40 Dk were considered low-Dk; 41-89 Dk were considered mid-Dk; and >90 Dk were considered high-Dk. All soft lenses were high water content lenses (>60% water content). Lenses were included if they were replaced due to loss, breakage, deposition, or poor wettability but not if replaced because of changes in fit or prescription.

Results; The mean (+SD) life-spans of each lens type in months were 19.9 +/- 17 for low-Dk RGP lenses, 15.9 +/-13.3 for mid-Dk RGP lenses, 9.0+8.2 for high-Dk RGP lenses, and 6.4 +/-5.2 for high water content soft lenses. Statistical analysis using a one-way ANOVA on ranks indicated that these results were statistically significant (P< 0.0001).

Conclusions: Patients should be informed that high-Dk lenses (RGP and soft) provide substantial clinical benefits and that they should expect to replace high-Dk RGP lenses after approximately 6 months. This lends further credence to the use of high-Dk lenses on a planned replacement basis.

Analysis of residues of prometryne and acetochlor in soil-water system by solid-phase extraction and gas chromatography/mass spectrometry

A highly sensitive and simple analytical method was developed for analyzing the binary mixed pesticides of prometryne and acetochlor in soil–water system by gas chromatography/mass spectrometry (GC/MS). The sample solution was first purified by C18 solid-phase extraction column, which was leached by acetone. The leachate was enriched to 1.0 mL by pressure blowing concentrator and then analyzed by GC/MS. The linear calibration curves were showed in the range of 1–15 μg/mL with a correlation coefficient of 0.9991. The average recoveries (n = 5) were between 95.3 and 115.7%, with relative standard deviations ranged from 1.71 and 7.95%. The limits of detection of Prometryne/Acetochlor were up to 0.06 and 0.17 μg/mL, respectively. This method provides a reliable approach to examine and evaluate the residues of prometryne and acetochlor in the soil–water system.

Paradigm shift to enhanced water supply planning through augmented grids, scarcity pricing and adaptive factory water : a system dynamics approach

This paper details a system dynamics model developed to simulate proposed changes to water governance through the integration of supply, demand and asset management processes. To effectively accomplish this, interconnected feedback loops in tariff structures, demand levels and financing capacity are included in the model design, representing the first comprehensive life-cycle modelling of potable water systems. A number of scenarios were applied to Australia's populated South-east Queensland region, demonstrating that introducing temporary drought pricing (i.e. progressive water prices set inverse with availability), in conjunction with supply augmentation through rain-independent sources, is capable of efficiently providing water security in the future. Modelling demonstrated that this alternative tariff structure reduced demand in scarcity periods thereby preserving supply, whilst revenues are maintained to build new water supply infrastructure. In addition to exploring alternative tariffs, the potential benefits of using adaptive pressure-retarded osmosis desalination plants for both potable water and power generation was explored. This operation of these plants for power production, when they would otherwise be idle, shows promise in reducing their net energy and carbon footprints. Stakeholders in industry, government and academia were engaged in model development and validation. The constructed model displays how water resource systems can be reorganised to cope with systemic change and uncertainty.

Analysis of mammalian cell proliferation and macromolecule synthesis using deuterated water and gas chromatography-mass spectrometry.

Deuterated water (²H₂O), a stable isotopic tracer, provides a convenient and reliable way to label multiple cellular biomass components (macromolecules), thus permitting the calculation of their synthesis rates. Here, we have combined ²H₂O labelling, GC-MS analysis and a novel cell fractionation method to extract multiple biomass components (DNA, protein and lipids) from the one biological sample, thus permitting the simultaneous measurement of DNA (cell proliferation), protein and lipid synthesis rates. We have used this approach to characterize the turnover rates and metabolism of a panel of mammalian cells in vitro (muscle C2C12 and colon cancer cell lines). Our data show that in actively-proliferating cells, biomass synthesis rates are strongly linked to the rate of cell division. Furthermore, in both proliferating and non-proliferating cells, it is the lipid pool that undergoes the most rapid turnover when compared to DNA and protein. Finally, our data in human colon cancer cell lines reveal a marked heterogeneity in the reliance on the de novo lipogenic pathway, with the cells being dependent on both 'self-made' and exogenously-derived fatty acid.

Effects of trunk-shaker harvester and ethephon on plant water status, leaf gas exchange, and yield of citrus cultivated under Mediterranean conditions

This work was aimed to study whether the application of ethephon as an abscission agent and mechanical harvest using a trunk shaker have any effect on plant water status, leaf gas exchange, and yield of mandarin and orange trees cultivated under Mediterranean conditions. The experiment was performed from 2008 to 2011 in five commercial orchards where parameters related to the plant water status and leaf gas exchange were measured before the application of ethephon, at harvest time and at different occasions after harvest. In addition, the effects of ethephon dose on yield in the current and subsequent seasons were also evaluated. Results showed that ethephon applications and mechanical harvest did not detrimentally affect plant water status in any of the cultivars studied. Furthermore, either had no effect or had a short temporal decrease effect on leaf gas exchange depending on the cultivar studied although with no consequences for the fruit yield obtained during the current season. Increasing ethephon doses led to fruit yield reductions in the mandarin ‘Orogrande’ trees in subsequent seasons. When trunk-shaker and ethephon applications were combined, however, yields from the late-maturing orange significantly decline in subsequent seasons. Overall, results show that using a trunk shaker is a viable technique to mechanically harvest citrus trees destined to both fresh and industry market and can be considered as an alternative to the traditional manual harvest usually performed under Mediterranean conditions. However, its use cannot be recommended for late-maturing oranges, such as the ‘Navel Lane Late’ in which mature fruit and fruitlets coexist in the tree at the time of harvest.

Net energy analysis of solar and conventional domestic hot water systems in Melbourne, Australia

It is commonly assumed that solar hot water systems save energy and reduce greenhouse gas emissions. The net energy requirement of solar hot water systems has rarely been analysed, including their embodied energy. The extent to which solar hot water systems save energy compared to conventional systems in Melbourne, Australia, is shown through a comparative net energy analysis. It was shown that the embodied energy component of the net energy requirement of solar and conventional hot water systems was insignificant. The solar hot water systems provided a net energy saving compared to the conventional systems after 0.5–2 years, for electric- and gas-boosted systems respectively.

Photocatalytic production of methane and hydrogen through reduction of carbon dioxide with water using titania pellets

This paper presents an experimental study on employing a pellet form of catalyst in photo-reduction of carbon dioxide with water. Water was first absorbed into titania pellets. Highly purified carbon dioxide gas was then discharged into a reactor containing the wet pellets, which were then illuminated continuously for 65 hours using UVC lamps. Analysing the products accumulated in the reactor confirmed that methane and hydrogen were produced through photo-reduction of carbon dioxide with water. No other hydrocarbons were detected. Increasing the temperature in the reactor has showed little change on the amount of methane produced.

Net energy analysis of solar and conventional domestic hot water systems in Melbourne, Australia

It is commonly assumed that solar hot water systems save energy and reduce greenhouse gas emissions. Very rarely has the life-cycle energy requirements of solar hot water systems been analysed, including their embodied energy. The extent to which solar hot water systems save energy compared to conventional systems in Melbourne, Australia, is shown through a comparative net energy analysis. The solar systems provided a net energy saving compared to the conventional systems after 0.5 to 2 years, for electricity and gas systems respectively.

Solar versus fossil fuels : A net energy analysis of domestic solar hot water systems in Australia

It is commonly assumed that solar hot water systems save energy and reduce greenhouse gas emissions compared to conventional electric and gas hot water systems. Very rarely has the life-cycle energy requirements (including the embodied energy of manufacture) of solar hot water systems been analysed. The extent to which solar hot water systems can save energy compared to conventional electric or gas hot water systems can be shown through a comparative net energy analysis. This method determines the ‘energy payback period’, including consideration of the difference in operational energy savings and energy embodied in the devices relative to a base case. Dr Robert Crawford, Deakin University, Australia presents the results of a net energy analysis that compared solar and conventional hot water systems for a southern (Melbourne) and a northern (Brisbane) Australian climate.

A comparative study of secondary Ion emission from water ice under Ion bombardment by Au+, Au3+, and C60+

Secondary ion emission from water ice has been studied using Au⁺, Au₃⁺, and C₆₀⁺ primary ions. In contrast to the gas phase in which the spectra are dominated by the (H₂O)_nH⁺ series of ions, the spectra from ice using all three primary ions are principally composed of two series of cluster ions (H₂O)_nH⁺ and (H₂O)_n⁺. Dependent on the conditions, the unprotonated series can dominate the spectra. Since in the gas phase (H₂O)_n⁺ is unstable with respect to the formation of the protonated ion series, the presence of the solid must provide a means to stabilize their formation. The cluster ion yields under Au⁺ bombardment are very low and can be understood in terms of sputtering on the borderline between linear cascade and thermal spike behavior. There is a 10⁴ increase in yield across the whole spectrum compared to Au⁺ when Au₃⁺ and C₆₀⁺ species are used as primary ions. The character of the spectra differed between these two primary ions, but insights into the mechanism of secondary ion emission for both is discussed within an energy deposition framework provided by the fluid flow-based mesoscale energy deposition footprint (MEDF) model that predicts a cone-shaped zone of activation and emission. C₆₀⁺ differs from Au^₃+ in that it delivers its energy closer to the surface, and it is argued this has consequences for the cluster ion distribution and yield. Increasing the ion dose by sputtering suppresses the yield of (H₂O)_n⁺ and increases the yield of the protonated ions in the small cluster region, whereas the yield in the large cluster regime is suppressed significantly. The three primary ions show rather different behavior, and this is discussed in the light of the sputtering models. Finally, negative ion spectra including cluster ions have been observed for the first time. C₆₀⁺ delivers the highest yields, but these are less than 10 times the positive ion yields, probably because the O and OH fragment ions on which the clusters are based are easily neutralized by protons.