Characterising vehicle emissions from the burning of biodiesel made from vegetable oil

Biodiesel manufactured from canola oil was blended with diesel and used as fuel in two diesel vehicles. This study aimed to test the emissions of diesel engines using blends of 100%, 80%, 60%, 40% , 20% biodiesel and 100% petroleum diesel, and characterise the particulate matter and gaseous emissions, with particular attention to levels of polycyclic aromatic hydrocarbons (PAHs) which are harmful to humans. A real time dust monitor was also used to monitor the continuous dust emissions during the entire testing cycle. The ECE(Euro 2) drive cycle was used for all emission tests. It was found that the particle concentration was up to 33% less when the engine burnt 100% biodiesel, compared to 100% diesel. Particle emission reduced with increased percentages of biodiesel in the fuel blends. Reductions of NOx, HC and CO were limited to about 10% when biodiesel was burned. Levels of CO2 emissions from the use of biodiesel and diesel were similar. Eighteen EPA priority PAHs were targeted, with only 6 species detected in the gaseous phase from the samples . 9 PAHs were detected in particulate phases at much lower levels than gaseous PAHs. Some marked reductions were observed for less toxic gaseous PAHs such as naphthalene when burning 100% biodiesel, but the particulate PAH emissions, which have more implications to adverse health effects, were virtually unchanged and did not show a statistically significant reduction. These findings are useful to gain an understanding of the emissions and environmental impacts of biodiesel.

Environmental education - appropriate vehicle for teaching science?

This article we have addresses the issue of an integrated science education curriculum. Following Beane (1995), we suggest an approach that begins with an issue, topic or problem that has an independent existence in real life, and which can serve as a supra.disciplinary organizing principle in providing a framework ror developing a curriculum that presents science content in a contextual fashion alongside other disciplinary content, as dictated by the demands of doing justice to an investigation of the issue, topic or problem. The article illuminates the approach with reference to a case study of a whole-year environmental program. It engages some of the issues raised in recent literature on integrated science curricula, concluding that environmental education might well serve as a useful vehicle for an integrated science education.

Factors affecting patch occupancy by the white-browed treecreeper Climacteris Affinis in an agricultural landscape in north-west Victoria, Australia

The survival of habitat-dependent fauna within agricultural mosaics depends on their ability to occupy remnant habitat patches and move through the modified landscape. In north-west Victoria, Australia, less than 10% of the pre-European extent of Selah Casuarina pauper woodland remains intact due to agricultural development. The White-browed Treecreeper Climacteris affinis, is a small, insectivorous passerine that, in this region, preferentially inhabits Selah woodland. To assess the ability of C. affinis to persist in an agricultural landscape, 30 woodland sites in the Millewa landscape (34°30'S, 141°30'E) were surveyed, and patterns of patch occupancy used to examine the influence of spatial characteristics, landscape context and grazing by stock on the suitability of remnants as C. affinis habitat. Sites occupied by C. affinis were larger and less likely to be grazed by stock than vacant patches. The area-dependency of patch occupancy represents a step-threshold: C. affinis were not detected in remnants with less than 18.5 ha of Selah woodland but above this threshold, density was not correlated with patch area. Measures of patch isolation, the existence of linking linear "corridors" and tree density were not reliable indicators of patch occupancy. The presence of the species in remnants entirely surrounded by agricultural land suggests they are capable of crossing up to 450 m of cultivated land to prospect for habitat. The extensive network of linear vegetation and the numerous small remnants and scattered trees appear to facilitate movements of C. affinis in this landscape. Increasing the size of existing remnants, creating new habitat to expand the area of occupancy and maintaining landscape connectivity are priorities for the long-term management of this threatened species.

Research on seismic signals for vehicle targets and recognition by data fusion

This paper researches seismic signals of typical vehicle targets in order to extract features and to recognize vehicle targets. As a data fusion method, the technique of artificial neural networks combined with genetic algorithm(ANNCGA) is applied for recognition of seismic signals that belong to different kinds of vehicle targets. The technique of ANNCGA and its architecture have been presented. The algorithm had been used for classification and recognition of seismic signals of vehicle targets in the outdoor environment. Through experiments, it can be proven that seismic properties of target acquired are correct, ANNCGA data fusion method is effective to solve the problem of target recognition.

Students' conflicting attitudes towards games as a vehicle for learning mathematics : a methodological dilemma

Mathematics games are widely employed in school classrooms for such reasons as a reward for early finishers or to enhance students' attitude towards mathematics. During a four week period, a total of 222 Grade 5 and 6 (9 to 12 years old) children from Melbourne, Australia, were taught multiplication and division of decimal numbers using calculator games or rich mathematical activities. Likert scale surveys of the children's attitudes towards games as a vehicle for learning mathematics revealed unexpectedly high proportions of negative attitudes at the conclusion of the research. In contrast, student interview data revealed positive associations between games and mathematical learning. This article reports on the methodological dilemma of resultant conflicting attitudinal data related to game- playing. Concerns arising from the divergence in the results are raised in this article. Implications based on the experience of this study may inform educational researchers about future methodological choices involving attitudinal research.

A video-based real-time vehicle detection method by classified background learning

A new two-level real-time vehicle detection method is proposed in order to meet the robustness and efficiency requirements of real world applications. At the high level, pixels of the background image are classified into three categories according to the characteristics of Red, Green, Blue (RGB) curves. The robustness of the classification is further enhanced by using
line detection and pattern connectivity. At the lower level, an exponential forgetting algorithm with adaptive parameters for different categories is utilised to calculate the background and reduce the distortion by the small motion of video cameras. Scene tests show that the proposed method is more robust and faster than previous methods, which is very suitable for real-time vehicle detection in outdoor environments, especially concerning locations where the level of illumination changes frequently and speed detection is important.

A flow control methodology for the rapid generation of vehicle traffic models

This paper presents a conveyor-based methodology to model complex vehicle flows common to factory and distribution warehouse facilities. The AGV and human path modelling techniques available in many commercial discrete event simulation packages require extensive knowledge and time to implement even the simplest flow control rules for multiple vehicle interaction. Although discrete event simulation is accepted as an effective tool to model vehicle delivery movements, human paths and delivery schedules for modern assembly lines, the time to generate accurate models is a significant limitation of existing simulation-based optimisation methodologies. The flow control method has been successfully implemented using two commercial simulation packages. It provides a realistic visual representation, as well as accurate statistical results, and reduces the model development process cost.

How practice size impacts on the implementation and dissemination of post occupancy evaluation

There has been much research on the subject of environmentally sustainable design (ESD), with emerging techniques and technologies improving rapidly and informing sustainability higher education teaching to architects and prospective architects. By examining the success of sustainable designs using post occupancy evaluations, architectural practices might also increase their knowledge of sustainable building practice. Post occupancy evaluations could be useful for improving the designs of future buildings and the design processes that generated them. This paper aims to evaluate these claims by asking: "Do sustainable design practices use the feedback gained from post occupancy evaluations?," "How does the feedback refine the design process?," "How is the information gained in these evaluations absorbed within the firm's design practices?," and, "Does the size of a practice impact on its implementation and
dissemination of POE?" This paper investigates the questions posed above through the questioning of architectural practices that have gained a reputation for environmentally sustainable design by having a strong sustainable design philosophy and/or by being recognised for this by winning a sustainability design award. The interviewed practices will have provided some form of post occupancy evaluation as a service or employed them to add to their own knowledge.

Risky driving habits and motor vehicle driver injury

Risky driving is an important cause of motor vehicle injury, but there is a lack of good epidemiological data in this field, particularly data comparing risky driving in younger drivers to those of other age groups. We examined the relationship between risky driving habits, prior traffic convictions and motor vehicle injury using cross-sectional data amongst 21,893 individuals in New Zealand, including 8029 who were aged 16–24 years. Those who reported frequently racing a motor vehicle for excitement or driving at 20 km/h or more over the speed limit, and those who had received traffic convictions over the past 12 months, were between two and four times more likely to have been injured while driving over the same time period. Driving unlicensed was a risk factor for older but not younger drivers, and driving at 20 km/h or more above the speed limits was a stronger risk factor for younger (<25 years) than older drivers. These results confirm the need for interventions targeting risky driving and suggest that different strategies may be required for different high-risk groups.

A novel method of tube manufacture for vehicle crashworthiness utilising the QUICKSTEP™ Process.

A novel method of composite tube manufacture was developed for potential use in automotive crash structures. Tubes were crushed axially under quasi-static conditions and highly repeatable behaviour was observed with an average specific energy absorption of -85kJ/kg. DMTA results indicated that the tubes were fully cured, even when the cycle was reduced to 7 minutes, giving this process huge potential for high-volume production.

3D virtual haptic cone for intuitive vehicle motion control

Haptic human-machine interfaces and interaction techniques have been shown to offer advantages over conventional approaches. This work introduces the 3D virtual haptic cone with the aim of improving human remote control of a vehicle's motion. The 3D cone introduces a third dimension to the haptic control surface over existing approaches. This approach improves upon existing methods by providing the human operator with an intuitive method for issuing vehicle motion commands whilst simultaneously receiving real-time haptic information from the remote system. The presented approach offers potential across many applications, and as a case study, this work considers the approach in the context of mobile robot motion control. The performance of the approach in providing the operator with improved motion controllability is evaluated and the performance improvement determined.

Power analysis and simulation of a vehicle under combined loads

This paper presents an analytical model of fuel consumption (AMFC) to coordinate the driving power and manage the overall fuel consumption for an internal combustion engine vehicle. The model calculates the different loads applied on the vehicle including road-slope, road-friction, wind-drag, accessories, and mechanical losses. Also, it solves the combustion equation of the engine under different working conditions including various fuel compositions, excess airs and air inlet temperatures. Then it determines the contribution of each load to signify the energy distribution and power flows of the vehicle. Unlike the conventional models in which the vehicle speed needs to be given as an input, the developed model can predict the vehicle speed and acceleration under different working conditions by allowing the speed to vary within a predefined range only. Furthermore, the model indicates the ways to minimises the vehicles' fuel consumption under various driving conditions. The results show that the model has the potential to assist in the vehicle energy management.

An intelligent energy management model for a parallel hybrid vehicle under combined loads

To exploit the benefits offered by parallel HEVs, an intelligent energy management model is developed and evaluated in this paper. Despite most existing works, the developed model incorporates combined wind/drag, slope, rolling, and accessories loads to minimise the fuel consumption under varying driving conditions. A slope prediction unit is also employed. The engine and the electric motor can output power simultaneously under a heavy-load or a slopped road condition. Two simulation were conducted namely slopped-windy-prediction and slopped-windy-prediction-hybrid. The results indicate that the vehicle speed and acceleration is smoother where the hybrid component was included. The average fuel consumption for the first and second simulations were 7.94 and 7.46 liter/100 km, respectively.

A rule-based intelligent energy management system for an internal combustion engine vehicle

An intelligent energy management system (IEMS) is developed to improve fuel efficiency of an internal combustion engine vehicle. It helps determine the best approach to run the engine system through dynamically analysing various factors relating to vehicle. The energy balance technique is implemented and utilised. The simulation outcome of the IEMS is compared against that of a conventional system under the same driving factors. The results show that the IEMS reduces the fuel consumption around 5.6% for the tested conditions.