Measuring health in a vacuum: examining the disability weight of the DALY

The Disability Adjusted Life Year (DALY) is a widely used summary measure of population health combining years of life lost due to mortality and years of healthy life lost due to disability. A feature of the DALY is that, in the assessment of morbidity, each health condition is associated with a disability weight. The disability weight lies on a scale between 0 (indicating the health condition is equivalent to full health) and 1 (indicating the health condition is equivalent to death). The disability weight associated with each health condition is currently fixed across all social, cultural and environmental contexts. Thus blindness in the United Kingdom has the same disability weight as blindness in Niger in spite of structural interventions in the UK that make the disability less severe than in Niger. Although the fixed disability weight is defended on grounds that it supports a strongly egalitarian flavour in the DALY, we argue that the lack of consideration of realistic contexts results in a measure that will underestimate the burden associated with morbidity in disadvantaged populations and overestimate the burden in advantaged populations. There is, consequently, a loss of information on possible non-clinical points of intervention. Disaggregated estimates of the burden of disease such as those in the World Health Report 2000 should be interpreted with caution.

On purely gravito-magnetic vacuum space-times

It is shown that there are no purely magnetic, vacuum, spacetime metrics where any one of the following conditions holds: (a) the ratio of any two eigenvalues of the Weyl tensor is constant, (b) both of the Riemann principal null directions, defining the time-like blade, are nonrotating, (c) the shear tensor possesses an eigenvector v^a which is defined by one of the space-like Riemann principal directions, (d) the vorticity is parallel to v^a, where v^a is defined by one of the space-like Riemann principal directions.

Preparation of Mg55Ni35Si10 amorphous powders by mechanical alloying and consolidation by vacuum hot pressing

Amorphous 55Mg35NilOSi alloy powder has been synthesized by mechanical alloying technique using pure Mg, Ni and Si elemental powders. The transformation of the crystalline powders into an amorphous one has been investigated by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and differential scanning calorimetry. The new material produced has a higher thermal stability than reported results, which is beneficial to the fabrication of Mg-Ni-Si bulk amorphous components through powder metallurgy.

Comparison of the color stability and lipid oxidative stability of fresh vacuum packaged lamb muscle containing elevated omega-3 and omega-6 fatty acid levels from dietary manipulation

A series of three experiments were conducted with second cross ([Merino×Border Leicester]×Poll Dorset) wether lambs to evaluate the effects of dietary treatments on manipulation of muscle long-chain (LC) omega-3 fatty acids (FA) on the color stability and oxidative stability of fresh and vacuum packaged lamb. At the end of 7-, 6- and 6-week experimental periods for experiments (Exp.) 1–3 respectively, lambs were slaughtered at a commercial abattoir. At 24 h post-mortem, muscle longissimus lumborum (LL) and longissimus thoracis (LT) were removed and evaluated for color and lipid oxidative stability under specified commercial storage and display condition. Of the dietary supplements used, fish meal and fish oil moderately (P<0.01) and markedly (P<0.001) increased muscle omega-3 FA content, while both protected canola seed (P<0.001) and protected sunflower meal protein significantly (P<0.02) increased muscle omega-6 FA content or ratio of omega-6/omega-3 of the longissimus muscle. In all experiments, the substantial increase (P<0.001) in muscle LC omega-3 and omega-6 FA had no consistent significant effect on color values (redness (a*), yellowness (b*) and lightness (L*)) for fresh and vacuum packaged lamb over a 6-day display period. Lipid oxidation, determined by the levels of thiobarbituric acid reactive substances (TBARS) indicated the enrichment of muscle polyunsaturated fatty acid (PUFA) levels in lambs did not produce significant differences resulting either from main treatment effects or for treatment×day×type interactions (where type was fresh and vacuum packaged). Present results demonstrated the color and lipid oxidative stability of lamb longissimus muscle during refrigerated display was not affected by enhanced levels of omega-3 and omega-6 FA due to dietary treatments.

Comparison of the color stability and lipid oxidative stability of fresh and vacuum packaged lamb muscle containing elevated omega-3 and omega-6 fatty acid levels from dietary manipulation

A series of three experiments were conducted with second cross ([Merino×Border Leicester]×Poll Dorset) wether lambs to evaluate the effects of dietary treatments on manipulation of muscle long-chain (LC) omega-3 fatty acids (FA) on the color stability and oxidative stability of fresh and vacuum packaged lamb. At the end of 7-, 6- and 6-week experimental periods for experiments (Exp.) 1–3 respectively, lambs were slaughtered at a commercial abattoir. At 24 h post-mortem, muscle longissimus lumborum (LL) and longissimus thoracis (LT) were removed and evaluated for color and lipid oxidative stability under specified commercial storage and display condition. Of the dietary supplements used, fish meal and fish oil moderately (P<0.01) and markedly (P<0.001) increased muscle omega-3 FA content, while both protected canola seed (P<0.001) and protected sunflower meal protein significantly (P<0.02) increased muscle omega-6 FA content or ratio of omega-6/omega-3 of the longissimus muscle. In all experiments, the substantial increase (P<0.001) in muscle LC omega-3 and omega-6 FA had no consistent significant effect on color values (redness (a*), yellowness (b*) and lightness (L*)) for fresh and vacuum packaged lamb over a 6-day display period. Lipid oxidation, determined by the levels of thiobarbituric acid reactive substances (TBARS) indicated the enrichment of muscle polyunsaturated fatty acid (PUFA) levels in lambs did not produce significant differences resulting either from main treatment effects or for treatment×day×type interactions (where type was fresh and vacuum packaged). Present results demonstrated the color and lipid oxidative stability of lamb longissimus muscle during refrigerated display was not affected by enhanced levels of omega-3 and omega-6 FA due to dietary treatments.

Comparison of the color stability and lipid oxidative stability fo fresh and vacuum packaged lamb muscle containing elevated omega-3 and omega-6 fatty acid levels from dietary manipulation

A series of three experiments were conducted with second cross ([Merino×Border Leicester]×Poll Dorset) wether lambs to evaluate the effects of dietary treatments on manipulation of muscle long-chain (LC) omega-3 fatty acids (FA) on the color stability and oxidative stability of fresh and vacuum packaged lamb. At the end of 7-, 6- and 6-week experimental periods for experiments (Exp.) 1–3 respectively, lambs were slaughtered at a commercial abattoir. At 24 h post-mortem, muscle longissimus lumborum (LL) and longissimus thoracis (LT) were removed and evaluated for color and lipid oxidative stability under specified commercial storage and display condition. Of the dietary supplements used, fish meal and fish oil moderately (P<0.01) and markedly (P<0.001) increased muscle omega-3 FA content, while both protected canola seed (P<0.001) and protected sunflower meal protein significantly (P<0.02) increased muscle omega-6 FA content or ratio of omega-6/omega-3 of the longissimus muscle. In all experiments, the substantial increase (P<0.001) in muscle LC omega-3 and omega-6 FA had no consistent significant effect on color values (redness (a*), yellowness (b*) and lightness (L*)) for fresh and vacuum packaged lamb over a 6-day display period. Lipid oxidation, determined by the levels of thiobarbituric acid reactive substances (TBARS) indicated the enrichment of muscle polyunsaturated fatty acid (PUFA) levels in lambs did not produce significant differences resulting either from main treatment effects or for treatment×day×type interactions (where type was fresh and vacuum packaged). Present results demonstrated the color and lipid oxidative stability of lamb longissimus muscle during refrigerated display was not affected by enhanced levels of omega-3 and omega-6 FA due to dietary treatments.

Influence of helium atmospheric plasma treatment on surface and fracture-mechanical behaviour of quickstepTM cured bio-composites

This work investigated the potential of improving flexural properties of natural fiber (jute) reinforced biocomposites by atmospheric pressure helium plasma treatment. Composites were made by the use of combined hand lay-up and vacuum bagging technique followed by newly developed Australia patented Quickstep^TM curing. The physical properties of helium plasma modified fibers were investigated by means of wettability time, coefficient of friction (COF), atomic force microscopy (AFM) and chemical nature of the surface with ATR-FTIR and XPS. There was found a logical correlation between physical and chemical characteristics of the surface of fiber with the fracture mechanical behavior of their resulting biocomposites. In addition, the use of helium atmospheric plasma treatment prior to Quickstep^TM process has proved to be a potential way to positively alter the fracture-mechanical behavior of biocomposites. This study will lead to new commercial applications of natural fiber jute for the composite industry that go beyond wrapping and packaging.

Best practice in a resource vacuum : responding to the accommodation needs of people with high, complex or changing support needs

This paper aims to identify current practice responses to the housing and support needs of people with high, complex or changing support needs. Case studies of current housing dilemmas and responses were provided by Annecto and Scope (Vic), and included data about the responses of other providers known to these agencies. The paper will first present case study data in three categories of accommodation: living independently (ie. living alone in self-rented or self-owned housing with or without formal support); living without a home (ie. living in non permanent or non secure housing); and living in the parental home and planning for change. The case studies are followed by a discussion of the key response strategies evident in each, and an analysis of significant ‘lessons’ for policy.

The packaging and maturation of the HIV-1 Pol proteins

The Pol protein of human immunodeficiency virus type 1 (HIV-1) harbours the viral enzymes critical for viral replication; protease (PR), reverse transcriptase (RT), and integrase (IN). PR, RT and IN are not functional in their monomeric forms and must come together as either dimers (PR), heterodimers (RT) or tetramers (IN) to be catalytically active. Our knowledge of the tertiary structures of the functional enzymes is well advanced, and substantial progress has recently been made towards understanding the precise steps leading from Pol protein synthesis through viral assembly to the release of active viral enzymes. This review will summarise our current understanding of how the Pol proteins, which are initially expressed as a Gag-Pol fusion product, are packaged into the assembling virion and discuss the maturation process that results in the release of the viral enzymes in their active forms. Our discussion will focus on the relationship between structure and function for each of the viral enzymes. This review will also provide an overview of the current status of inhibitors against the HIV-1 Pol proteins. Effective inhibitors of PR and RT are well established and we will discuss the next generation inhibitors of these enzymes as well recent investigations that have highlighted the potential of IN and RNase H as antiretroviral targets.

Mutations in the kissing-loop hairpin of human immunodeficiency virus type 1 reduce viral infectivity as well as genomic RNA packaging and dimerization

A stem-loop termed the kissing-loop hairpin is one of the most highly conserved structures within the leader of human immunodeficiency virus type 1 (HIV-1) and chimpanzee immunodeficiency virus genomic RNA. Because it plays a key role in the in vitro dimerization of short HIV-1 RNA transcripts (M. Laughrea and L. Jette, Biochemistry 35:1589-1598, 1996, and references therein; M. Laughrea and L. Jette, Biochemistry 35:9366-9374, 1996, and references therein) and because dimeric RNAs may be preferably encapsidated into the HIV-1 virus, alterations of the kissing-loop hairpin might affect the in vivo dimerization and encapsidation processes. Accordingly, substitution and deletion mutations were introduced into the kissing-loop hairpin of an infectious HIV-1 molecular clone in order to produce viruses by transfection methods. The infectivity of the resulting viruses was decreased by at least 99%, the amount of genomic RNA packaged per virus was decreased by 50 to 75%, and the proportion of dimeric genomic RNA was reduced from >80 to 40 to 50%, but the dissociation temperature of the genomic RNA was unchanged. There is evidence suggesting that the deletion mutations moderately inhibited CAp24 production but had no significant effect on RNA splicing. These results are consistent with the kissing-loop model of HIV-1 RNA dimerization. In fact, because intracellular viral RNAs are probably more concentrated in transfected cells than in cells infected by one virus and because the dimerization and encapsidation processes are concentration dependent, it is likely that much larger dimerization and encapsidation defects would have been manifested within cells infected by no more than one virus.

The conformation of the mature dimeric human immunodeficiency virus type 1 RNA genome requires packaging of pol protein

The packaging of a mature dimeric RNA genome is an essential step in human immunodeficiency virus type 1 (HIV-1) replication. We have previously shown that overexpression of a protease (PR)-inactive HIV-1 Gag-Pro-Pol precursor protein generates noninfectious virions that contain mainly monomeric RNA (M. Shehu-Xhilaga, S. M. Crowe, and J. Mak, J. Virol. 75:1834-1841, 2001). To further define the contribution of HIV-1 Gag and Gag-Pro-Pol to RNA maturation, we analyzed virion RNA dimers derived from Gag particles in the absence of Gag-Pro-Pol. Compared to wild-type (WT) dimeric RNAs, these RNA dimers have altered mobility and low stability under electrophoresis conditions, suggesting that the HIV-1 Gag precursor protein alone is not sufficient to stabilize the dimeric virion RNA structure. The inclusion of an active viral PR, without reverse transcriptase (RT) and integrase (IN), rescued the stability of the virion RNA dimers in the Gag particles but did not restore the mobility of the RNAs, suggesting that RT and IN are also required for virion RNA dimer maturation. Thin-section electron microscopy showed that viral particles deficient in RT and IN contain empty cone-shaped cores. The abnormal core structure indicates a requirement for Gag-Pro-Pol packaging during core maturation. Supplementing viral particles with either RT or IN via Vpr-RT or Vpr-IN alone did not correct the conformation of the dimer RNAs, whereas expression of both RT and IN in trans as a Vpr-RT-IN fusion restored RNA dimer conformation to that of the WT virus and also restored the electron-dense, cone-shaped virion core characteristic of WT virus. Our data suggest a role for RT-IN in RNA dimer conformation and the formation of the electron-dense viral core.

Drag models comparison by single injection in vacuum fluidised beds

Single bubble injection simulations inside a minimally fluidized bed have been studied widely and are often used to validate the accuracy of different numerical models. Bubble shape, size and voidage distribution are the important parameters that are validated from the experiments. In the present work, the most widely used drag model (Gidaspow’s drag model) is compared to a new proposed slip flow drag model which takes into account the presence of the slip flow regime, often encountered in vacuum fluidized beds and characterised by Knudsen no. (Kn). Shape and size prediction of the bubble evolution inside the bed is carried out numerically by using the two fluid model, comparing the results predicted by the drag models. It is seen that the predictions are different for the two drag models only under high vacuum conditions corresponding to Kn in slip/transition flow regime. The predictions are also found sensitive to pressure gradient in the bed and fluid velocity.