The effect of anharmonicity on diatomic vibration: a spreadsheet simulation

The Effect of Anharmonicity on Diatomic Vibration: A Spreadsheet Simulation by Kieran F. Lim is reviewed.

Flexural vibration analysis of symmetric honeycomb panel with 4 sides simply supported

The free flexural vibration of symmetric honeycomb sandwich panel with 4 sides simply supported is analyzed by CPT (classical plate theory), FSDPT (first-order shear deformation plate theory) and TSDPT (third-order shear deformation plate theory). In the analysis the honeycomb core of cells is regarded equivalently as a layer of orthotropic material whose equivalent elastic parameters are determined by the modified Gibson's formula to deduce the equation of natural frequency of the sandwich panel. As shown by an example, the calculation of natural frequency of an aluminum honeycomb panel by use of TSDPT is higher accuracy than using either CPT or FSDPT.

The effects of whole-body vibration on the cross-transfer of strength

This study investigated whether the use of superimposed whole-body vibration (WBV) during cross-education strength training would optimise strength transfer compared to conventional cross-education strength training. Twenty-one healthy, dominant right leg volunteers (21±3 years) were allocated to a strength training (ST, m = 3, f = 4), a strength training with WBV (ST + V, m = 3, f = 4), or a control group (no training, m = 3, f = 4). Training groups performed 9 sessions over 3 weeks, involving unilateral squats for the right leg, with or without WBV (35 Hz; 2.5mm amplitude). All groups underwent dynamic single leg maximum strength testing (1RM) and single and paired pulse transcranial magnetic stimulation (TMS) prior to and following training. Strength increased in the trained limb for the ST (41%; ES = 1.14) and ST + V (55%; ES = 1.03) groups, which resulted in a 35% (ES = 0.99) strength transfer to the untrained left leg for the ST group and a 52% (ES = 0.97) strength transfer to the untrained leg for the ST + V group, when compared to the control group. No differences in strength transfer between training groups were observed (P = 0.15). For the untrained leg, no differences in the peak height of recruitment curves or SICI were observed between ST and ST + V groups (P = 1.00). Strength training with WBV does not appear to modulate the cross-transfer of strength to a greater magnitude when compared to conventional cross-education strength training.

The effect of a rapid heating rate, mechanical vibration and surfactant chemistry on the structure-property relationships of epoxy/clay nanocomposites

The role of processing conditions and intercalant chemistry in montmorillonite clays on the dispersion, morphology and mechanical properties of two epoxy/clay nanocomposite systems was investigated in this paper. This work highlights the importance of employing complementary techniques (X-ray diffraction, small angle X-ray scattering, optical microscopy and transmission electron microscopy) to correlate nanomorphology to macroscale properties. Materials were prepared using an out of autoclave manufacturing process equipped to generate rapid heating rates and mechanical vibration. The results suggested that the quaternary ammonium surfactant on C30B clay reacted with the epoxy during cure, while the primary ammonium surfactant (I.30E) catalysed the polymerisation reaction. These effects led to important differences in nanocomposite clay morphologies. The use of mechanical vibration at 4 Hz prior to matrix gelation was found to facilitate clay dispersion and to reduce the area fraction of I.30E clay agglomerates in addition to increasing flexural strength by over 40%.

Vibration based damage identification of a scale-model steel frame structure subjected to bolt connection failures

Large-span steel frame structures prove to be an ideal choice for their speed of construction, relatively low cost, strength, durability and structural design flexibility. For this type of structure, the beam-column connections are critical for its structural integrity and overall stability. This is because a steel frame generally fails first at its connectors, due to the change in stress redistribution with adjacent members and material related failures, caused by various factors such as fire, seismic activity or material deterioration. Since particular attention is required at a steel frame’s connection points, this study explores the applicability of a comprehensive structural health monitoring (SHM) method to identify early damage and prolong the lifespan of connection points of steel frames. An impact hammer test was performed on a scale-model steel frame structure, recording its dynamic response to the hammer strike via an accelerometer. The testing procedure included an intact scenario and two damage scenarios by unfastening four bolt connections in an accumulating order. Based entirely on time-domain experimental data for its calibration, an Auto Regressive Average Exogenous (ARMAX) model is used to create a simple and accurate model for vibration simulation. The calibrated ARMAX model is then used to identify various bolt-connection related damage scenarios via R² value. The findings in this study suggest that the proposed time-domain approach is capable of identifying structural damage in a parsimonious manner and can be used as a quick or initial solution.

Muscle atrophy, pain, and damage in bed rest reduced by resistive (vibration) exercise

The purpose of this study was to investigate the effectiveness of a short-duration (5-6 min, 3 d·wk) resistive exercise program with (RVE) or without (RE) whole-body vibration in reducing muscle atrophy in the lower limb during prolonged inactivity when compared with that in an inactive control group. METHODS: As part of the second Berlin BedRest Study, 24 male subjects underwent 60 d of head-down tilt bed rest. Using magnetic resonance imaging, muscle volumes of the individual muscles of the lower limb were calculated before and at various intervals during and after bed rest. Pain levels and markers of muscle damage were also evaluated during and after bed rest. Adjustment of P values to guard against false positives was performed via the false discovery rate method. RESULTS: On the "intent-to-treat" analysis, RE reduced atrophy of the medial and lateral gastrocnemius, soleus, vasti, tibialis posterior, flexor hallucis longus, and flexor digitorum longus (P ≤ 0.045 vs control group) and RVE reduced atrophy of the medial and lateral gastrocnemius and tibialis posterior (P ≤ 0.044). Pain intensity reports after bed rest were lower in RE at the foot (P ≤ 0.033) and whole lower limb (P = 0.01) and in RVE at the thigh (P ≤ 0.041), lower leg (P ≤ 0.01), and whole lower limb (P ≤ 0.036). Increases in sarcomere-specific creatine kinase after bed rest were less in RE (P = 0.020) and RVE (P = 0.020). No differences between RE and RVE were observed. CONCLUSIONS: In conclusion, a short-duration RVE or RE can be effective in reducing the effect of prolonged bed rest on lower extremity muscle volume loss during bed rest and muscle damage and pain after bed rest. Copyright © 2014 by the American College of Sports Medicine.

Whole-body vibration and occupational physical performance: a review

Introduction: In the occupational environment, there are a considerable number of stressors that can affect physical performance in job tasks. Whole-body vibration (WBV), which arises from vehicle transit, is one such stressor that has been demonstrated to alter human function in several ways. This study identifies the known physical changes to human function which result from WBV, to comment on changes which may translate to performance in physically demanding occupational tasks. Methods: A systematic review is performed on the literature relating to changes in the neuromuscular, physiological and biomechanical properties of the human body, when exposed to WBV. Selection criteria are constructed to synthesise articles which strictly relate to in-vehicle WBV and physical responses. Results: In total, 29 articles were identified which satisfied the criteria for inclusion. A range of physical responses produced from WBV are presented; however, little consistency exists in study design and the responses reported. Discussion: Given the inconsistency in the reported responses, the precise changes to human function remain unknown. However, there is sufficient evidence to warrant the design of studies which investigate occupationally relevant physical performance changes following WBV.

Resistive vibration exercise reduces lower limb muscle atrophy during 56-day bed-rest

OBJECTIVES: The current study aimed to examine the effectiveness of a resistive vibration exercise countermeasure during prolonged bed-rest in preventing lower-limb muscle atrophy. METHODS: 20 male subjects underwent 56-days of bed-rest and were assigned to either an inactive control, or a countermeasure group which performed high-load resistive exercises (including squats, heel raises and toe raises) with whole-body vibration. Magnetic resonance imaging of the lower-limbs was performed at two-weekly intervals. Volume of individual muscles was calculated. RESULTS: Countermeasure exercise reduced atrophy in the triceps surae and the vastii muscles (F>3.0, p<.025). Atrophy of the peroneals, tibialis posterior and toe flexors was less in the countermeasure-subjects, though statistical evidence for this was weak (F