Robust video/ultrasonic fusion based estimation for automotive applications

We describe how object estimation by a stationary or a non-stationary camera can be improved using recently-developed robust estimation ideas. The robustness of vision-based systems can be improved significantly by employing a Robust Extended Kalman Filter (REKF). The system performance is also enhanced by increasing the spatial diveristy in measurements via employing additional cameras for video capture. We describe a normal-flow based image segmentation technique to identify the object for the application of our proposed state estimation technique. Our simulations demonstrate that dynamic system modelling coupled with the application of a REKF significantly improves the estimation system performance, especially when large uncertainties are present.

Robust video/ultrasonic fusion-based estimation for automotive applications

In this paper, we use recently developed robust estimation ideas to improve object tracking by a stationary or nonstationary camera. Large uncertainties are always present in vision-based systems, particularly, in relation to the estimation of the initial state as well as the measurement of object motion. The robustness of these systems can be significantly improved by employing a robust extended Kalman filter (REKF). The system performance can also be enhanced by increasing the spatial diversity in measurements via employing additional cameras for video capture. We compare the performances of various image segmentation techniques in moving-object localization and show that normal-flow-based segmentation yields comparable results to, but requires significantly less time than, optical-flow-based segmentation. We also demonstrate with simulations that dynamic system modeling coupled with the application of an REKF significantly improves the estimation system performance, particularly, when subjected to large uncertainties.

Propagation characteristics of lamb waves in stringer-stiffened panels

Stringer-stiffened plate-like structure is a typical engineering structure and its structural integrity is critical. A guided Lamb wave-based damage identification scheme and an online structural health monitoring (SHM) system with an integrated PZT-sensor network were developed. In the previous studies, the specimens were relatively simple. In this paper, the above mentioned method was extended to the stiffened plate-like structure—a flat plate reinforced by stringer. FE dynamic simulation was applied to investigate the Lamb wave propagation characteristics due to the existence of stringer with the consideration of its material and geometric configurations.

The propagation of technology management taxonomies for evaluating investments in information systems

To provide managers with a critical insight into the management of new technology, this paper uses a case study research strategy to examine the technology management experiences of a leading UK manufacturing organization during its adoption of a vendor-supplied Manufacturing Resource Planning information system.

Computer aided ultrasonic thickness strain analysis of automotive sheet metal stampings using FEA information

This paper discusses a computer-aided methodology for thickness strain analysis (TSA) of sheet metal stampings using geometry and strain information that is extracted from finite element analysis (FEA) results. The system utilises both FEA results and an ultrasonic gauge capability expert system to assist press shop personnel, providing them with capabilities such as optimum measurement point location and an estimate of gauge error. Key advantages of this enhanced TSA methodology are related to overall efficiency and accuracy gains.

The effects of ultrasonic agitation in laundering on the properties of wool fabrics

This paper investigates the use of ultrasonic agitation as a method for reducing felting and area shrinkage during the laundering of wool fabric. Work was conducted to evaluate the changes in fibre and fabric properties after repeated exposure to ultrasonic agitation, and also the effectiveness of ultrasonic treatment to remove common stains. Fabric colour, appearance, tensile strength, dimensional stability and thickness were measured before and after each test. Ultrasonic agitation produced fine cracks in the scale structure of the fibre, but these had negligible effects on the strength and colour when compared to hand washing. Ultrasonic agitation caused less fibre migration than hand washing, with a reduced rate of thickness increase and felting. Ultrasonic agitation increased the level of stain removed from the fabric when compared with hand washing.

Sexing accuracy and indicators of maturation status in captive Murray cod Maccullochella peelii peelii using non-invasive ultrasonic imagery

Macroscopic- and histological-based assessments of gonad condition were compared with ultrasound images to determine the feasibility of this technology as a non-invasive diagnostic tool for identifying sex and assessing maturation status of Murray cod. Four age-classes (1⁺, 2⁺, 3⁺ and 6⁺ years), were sub-sampled at monthly intervals throughout their annual reproductive cycle and scanned with a 5 MHz linear transducer. An interpretation of sex was made from the resulting images and maximum cross-sectional gonad diameter and area were recorded. Fish were subsequently dissected to confirm gender, and the weights and maturation status of gonads determined and then compared with their respective image profile. Ovaries of females were usually a distinctive feature in ultrasound images, being particularly obvious in older and/or more developed fish. In contrast, the identification of male testis was more problematic. Nonetheless, identifying sex from ultrasound images was consistently achieved by recording the presence/absence of a female ovary (96% total sexing accuracy). Maximum cross-sectional ovary diameter and area were highly correlated with gonad weight (r² = 0.90 and 0.89, respectively) suggesting that indices of maturation status, comparable to the gonadosomatic index (GSI), can be obtained non-destructively from ultrasound scans of females. A less distinct relationship occurred between these dimensions and weight of testes (r² = 0.41). Significant increases (P < 0.05) in mean gonad index (GI, calculated from gonad diameter) occurred for most gonad development stages. However, differences in mean GI between maturation stages were confounded by phenotypic variability, indicating that GI may be limited to population level studies. Nevertheless, ultrasound images of ovaries at each development stage were visually distinctive and enabled qualitative evaluations of maturity, thereby complementing quantitative GI assessments. Repeated serial-monitoring of the same population using ultrasound appears to have great potential for tracking maturation-induced changes in broodfish.

Exploiting affinity propagation for energy-efficient information discovery in sensor networks

Wireless sensor networks (WSN) are attractive for information gathering in large-scale data rich environments. Emerging WSN applications require dissemination of information to interested clients within the network requiring support for differing traffic patterns. Further, in-network query processing capabilities are required for autonomic information discovery. In this paper, we formulate the information discovery problem as a load-balancing problem, with the combined aim being to maximize network lifetime and minimize query processing delay. We propose novel methods for data dissemination, information discovery and data aggregation that are designed to provide significant QoS benefits. We make use of affinity propagation to group "similar" sensors and have developed efficient mechanisms that can resolve both ALL-type and ANY-type queries in-network with improved energy-efficiency and query resolution time. Simulation results prove the proposed method(s) of information discovery offer significant QoS benefits for ALL-type and ANY-type queries in comparison to previous approaches.

Transesterification of fish oil to produce fatty acid ethyl esters using ultrasonic energy

This study evaluated the production of fatty acid ethyl esters from fish oil using ultrasonic energy and alkaline catalysts dissolved in ethanol. The feasibility of fatty acid ethyl ester production was determined using an ultrasonic bath and probe, and between 0.5 and 1% KOH (added to the fish oil). Furthermore, factors such as ultrasonic device (bath and probe), catalyst (KOH and C2H5ONa), temperature (20 and 60 °C), and duration of exposure (10–90 min) were assessed. Sodium ethoxide was found to be a more efficient catalyst than KOH when transesterifying fish oil. Ultrasonic energy applied for greater than 30 min at 60 °C using 0.8% of C2H5ONa as a catalyst transesterified over 98% fish oil triglycerides to fatty acid ethyl esters. It is reasonable to conclude that the yield of fatty acid ethyl esters produced by applying ultrasonic energy to fish oil is related to the sonication time. Due to increases in the surface area contact between the reactants and the catalyst, ultrasonic energy has the potential to reduce the production time required by a conventional large-scale commercial transesterification method that uses agitation as a way of mixing.

The optimisation of ultrasonic cleaning procedures for dairy fouled ultrafiltration membranes

Ultrafiltration (UF) of whey is a major membrane based process in the dairy industry. However, commercialization of this application has been limited by membrane fouling, which has a detrimental influence on the permeation rate. There are a number of different chemical and physical cleaning methods currently used for cleaning a fouled membrane. It has been suggested that the cleaning frequency and the severity of such cleaning procedures control the membrane lifetime. The development of an optimal cleaning strategy should therefore have a direct implication on the process economics. Recently, the use of ultrasound has attracted considerable interest as an alternative approach to the conventional methods. In the present study, we have studied the ultrasonic cleaning of polysulfone ultrafiltration membranes fouled with dairy whey solutions. The effects of a number of cleaning process parameters have been examined in the presence of ultrasound and results compared with the conventional operation. Experiments were conducted using a small single sheet membrane unit that was immersed totally within an ultrasonic bath. Results show that ultrasonic cleaning improves the cleaning efficiency under all experimental conditions. The ultrasonic effect is more significant in the absence of surfactant, but is less influenced by temperature and transmembrane pressure. Our results suggest that the ultrasonic energy acts primarily by increasing the turbulence within the cleaning solution.

Mechanisms for the ultrasonic enhancement of dairy whey ultrafiltration

Low frequency ultrasound has been used to facilitate cross-flow ultrafiltration of dairy whey solutions. Experimental results show that ultrasonic irradiation at low power levels can significantly enhance the permeate flux with an enhancement factor of between 1.2 and 1.7. The use of turbulence promoters (spacers) in combination with ultrasound can lead to a doubling in the permeate flux. The application of a combined pore blockage/cake resistance model to the observed experimental data suggests that the use of ultrasound acts to lower the compressibility of both the initial protein deposit and the growing cake. Conversely, the pore blockage parameter is not significantly affected. The use of a gel polarization model shows that the ultrasonic irradiation increases the mass transfer coefficient within the concentration polarization layer. Electron microscopy results showed no evidence that the ultrasonic irradiation altered the membrane integrity. HPLC analysis of the whey proteins in the feed solution before and after sonication showed that the concentration profile of the whey proteins was also not affected by the sonication process.