3D fibrous structures as cardiovascular implants

Medical textiles are a highly specialised stream of technical textiles industry with a growing range of applications. A significant advancement has been achieved in surgical products or biomedical textiles (implantable/non-implantable) with the advent of 3D textile manufacturing techniques. Cardiovascular soft tissue implants (vascular grafts) have been a field of interest over decades for use of innovative 3D tubular structures in treatment of cardiovascular diseases. In the field of soft tissue implants, knitted and woven tubular structures are being used for large diameter blood vessel replacements. Advent of electrospinning and tissue engineering techniques has been able to provide promising answers to small diameter vascular grafts. The aim of this review is to outline the approaches in vascular graft development utilising different 3D tubular structure forming techniques. The emphasis is on vascular graft development techniques that can help improve treatment efficacy in future.

Energy absorption behaviour of rapidly manufactured carbon/epoxy and glass/polypropylene structures

In this thesis the crashworthiness of composite tubular structures was investigated along with the property structure relationships of a glass/polypropylene material. The energy absorption capacity of tubular structures in a number of different testing configurations was made. Two materials; carbon/epoxy pre-preg and a glass/polypropylene dry pre-preg were investigated.

Osmoregulation in elephant fish Callorhinchus Milii (Holocephali), with special reference to the rectal gland

Osmoregulatory mechanisms in holocephalan fishes are poorly understood except that these fish are known to conduct urea-based osmoregulation as in elasmobranchs. We, therefore, examined changes in plasma parameters of elephant fish Callorhinchus milii, after gradual transfer to concentrated (120%) or diluted (80%) seawater (SW). In control fish, plasma Na and urea concentrations were about 300 mmol l^–1 and 450 mmol l^–1, respectively. These values were equivalent to those of sharks and rays, but the plasma urea concentration of elephant fish was considerably higher than that reported for chimaeras, another holocephalan. After transfer to 120% SW, plasma osmolality, urea and ion concentrations were increased, whereas transfer to 80% SW resulted in a fall in these parameters. The rises in ion concentrations were notable after transfer to 120% SW, whereas urea concentration decreased predominantly following transfer to 80% SW. In elephant fish, we could not find a discrete rectal gland. Instead, approximately 10 tubular structures were located in the wall of post-valvular intestine. Each tubular structure was composed of a putative salt-secreting component consisting of a single-layered columnar epithelium, which was stained with an anti-Na⁺,K⁺-ATPase serum. Furthermore, Na⁺,K⁺-ATPase activity in the tubular structures was significantly increased after acute transfer of fish to concentrated SW (115%). These results suggest that the tubular structures are a rectal gland equivalent, functioning as a salt-secreting organ. Since the rectal gland of elephant fish is well developed compared to that of Southern chimaera, the salt-secreting ability may be higher in elephant fish than chimaeras, which may account for the lower plasma NaCl concentration in elephant fish compared to other chimaeras. Since elephant fish have also attracted attention from a viewpoint of genome science, the availability of fish for physiological studies will make this species an excellent model in holocephalan fish group.

Energy absorption and crushing behaviour of foam-filled aluminium tubes

The crushing behaviour and energy absorption of foam filled aluminium tubular structures were investigated using the quasi-static compressive tests. The crushing behaviour of the tubular structures changed due to foam filling. The energy absorption of the foam filled tubular structures was improved significantly. Foam filling caused an interaction effect between the tube and the foam during progressive crushing, leading to an increase in the mean crushing load compared to that of the foam or tube itself. This interaction effect might be affected by several parameters such as the density of the foam, the properties of both the foam material and tube material, and the thickness and outer diameter of the tube. In particular, the interaction effect essentially depended on the ratio of the mean crushing force of the foam to that of the tube.

Osmoregulation in elephant fish, CALLORHYNCHUS MILLII (HOLOCEPHALI)

Osmoregulatory mechanisms in holocephalan fishes are unknown except that they conduct urea-based osmoregulation as in elasmobranchs. We, therefore, examined changes in plasma parameters of elephant fish, Callorhynchus millii, after gradual transfer to concentrated (120%) or diluted (80%) seawater (SW). In control fish, plasma Na and urea concentrations were about 300mM and 450mM, respectively. These values were equivalent to those of sharks and rays, but the plasma urea concentration of elephant fish was considerably higher than that reported for chimaeras, another holocephalan. After transfer to 120% SW, the plasma Na concentration markedly increased, while a conspicuous decrease in plasmaurea concentration was observed following transfer to 80% SW. In elephant fish, we could not find a discrete rectal gland. Instead, approximately 10 tubular structures were located in the wall of post-valvular intestine. Each tubular structure was composed of a putative salt-secreting component consisting of a single-layered columnar epithelium, which was stained with anti-Na+,K±ATPase serum. It is most likely that the tubular structures in the posterior intestine represent a primitive form of the rectal gland in elephant fish. In addition, we have identified two C-type natriuretic peptides (CNPs) from the heart and brain of elephant fish, which may contribute to the control of NaCl excretion from the rectal gland of elephant fish as it does in elasmobranchs.

Influence of nitriding gases on the growth of boron nitride nanotubes

Boron nitride (BN) nanotubes of different sizes and tubular structures exhibit very different mechanical and chemical properties, as well as different applications. BN nanotubes of different sizes and nanostructures have been produced in different nitriding gases in a milling and annealing process, in which elemental boron powder was first milled in NH₃ for 150 h and subsequently annealed at 1,200 °C for 6 h. The influence of nitriding gases was investigated by using N₂, NH₃, N₂–H₂ mixture gases. A relatively slow nitriding reaction in NH₃ gas leaded to a 2D growth of BN (002) basal planes and the formation of thin BN nanotubes without the help of metal catalysts. Fast nitriding reactions occurred in N₂ or N₂–H₂ mixture gases, catalyzed by metal particles, resulted in 3D crystal growth and the formation of many large cylindrical and bamboo tubes.

Finite element modelling of metallic tubular crash structures with an explicit code

Numerous experimental studies have been carried out to investigate the collapse of tubular metallic crash structures under axial compression. Some simple theoretical models have been developed but these often assume one type of progressive collapse, which is not always representative of the real situation. Finite Element (FE) models, when further refined, have the potential to predict the actual collapse mode and how it influences the load-displacement and energy absorption characteristics. This paper describes an FE modelling investigation with the explicit code LS−DYNA. An automatic mesh generation programme written by the authors is used to set up shell and solid element tube models. Mesh specification issues and features relating to the contact and friction models are discussed in detail. The crush modes, load-deflection characteristics and energy absorption values found in the simulations are compared with a reasonable degree of correlation to those observed in a physical testing programme; however, improvements are still required.

Composite crashworthy structures

This study presents an innovative finite element delamination model which successfully reproduced the experimental failure behaviour observed in axial crush testing. Tests were conducted on tubes manufactured by a novel composite curing process, resulting in the ability to cure tubular profiles in 7 minutes - 95% quicker than traditional autoclave curing.

CAE crash analysis of structures in oblique loading

This work focussed on how tubular steel structures similar to that in frontal car frames deform under crash conditions. The novelty comes from finding three crash modes: axial crush, transitional and global bending. Each mode was categorised by reaction force and energy absorption, this allowing for better structural design practices.