Video driven traffic modelling

We propose Video Driven Traffic Modelling (VDTM) for accurate simulation of real-world traffic behaviours with detailed information and low-cost model development and maintenance. Computer vision techniques are employed to estimate traffic parameters. These parameters are used to build and update a traffic system model. The model is simulated using the Paramics traffic simulation platform. Based on the simulation techniques, effects of traffic interventions can be evaluated in order to achieve better decision makings for traffic management authorities. In this paper, traffic parameters such as vehicle types, times of starting trips and corresponding origin-destinations are extracted from a video. A road network is manually defined according to the traffic composition in the video, and individual vehicles associated with extracted properties are modelled and simulated within the defined road network using Paramics. VDTM has widespread potential applications in supporting traffic decision-makings. To demonstrate the effectiveness, we apply it in optimizing a traffic signal control system, which adaptively adjusts green times of signals at an intersection to reduce traffic congestion.

Intelligent traffic light control of isolated intersections using machine learning methods

Traffic congestion is one of the major problems in modern cities. This study applies machine learning methods to determine green times in order to minimize in an isolated intersection. Q-learning and neural networks are applied here to set signal light times and minimize total delays. It is assumed that an intersection behaves in a similar fashion to an intelligent agent learning how to set green times in each cycle based on traffic information. Here, a comparison between Q-learning and neural network is presented. In Q-learning, considering continuous green time requires a large state space, making the learning process practically impossible. In contrast to Q-learning methods, the neural network model can easily set the appropriate green time to fit the traffic demand. The performance of the proposed neural network is compared with two traditional alternatives for controlling traffic lights. Simulation results indicate that the application of the proposed method greatly reduces the total delay in the network compared to the alternative methods.

ANFIS traffic signal controller for an isolated intersection

Traffic signal controlling is one of the solutions to reduce the traffic congestion in cities. To set appropriate green times for traffic signal lights, we have applied Adaptive Neuro-Fuzzy Inference System (ANFIS) method in traffic signal controllers. ANFIS traffic signal controller is used for controlling traffic congestion of a single intersection with the purpose of minimizing travel delay time. The ANFIS traffic controller is an intelligent controller that learns to set an appropriate green time for each phase of traffic signal lights at the start of the phase and based on the traffic information. The controller uses genetic algorithm to tune ANFIS parameters during learning time. The results of the experiments show higher performance of the ANFIS traffic signal controller compared to three other traffic controllers that are developed as benchmarks. One of the benchmarks is GA-FLC (Araghi et al., 2014), next one is a fixed-FLC, and a fixed-time controller with three different values for green phase. Results show the higher performance of ANFIS controller.

Optimal design of traffic signal controller using neural networks and fuzzy logic systems

This paper aims at optimally adjusting a set of green times for traffic lights in a single intersection with the purpose of minimizing travel delay time and traffic congestion. Neural network (NN) and fuzzy logic system (FLS) are two methods applied to develop intelligent traffic timing controller. For this purpose, an intersection is considered and simulated as an intelligent agent that learns how to set green times in each cycle based on the traffic information. The training approach and data for both these learning methods are similar. Both methods use genetic algorithm to tune their parameters during learning. Finally, The performance of the two intelligent learning methods is compared with the performance of simple fixed-time method. Simulation results indicate that both intelligent methods significantly reduce the total delay in the network compared to the fixed-time method.

Optimal fuzzy traffic signal controller for an isolated intersection

  This paper aims at optimally adjusting a set of green times for traffic lights in a single intersection with the purpose of minimizing travel delay time and traffic congestion. Fuzzy logic system (FLS) is the method applied to develop the intelligent traffic timing controller. For this purpose, an intersection is considered and simulated as an intelligent agent that learns how to set green times in each cycle based on the traffic information. The FLS controller (FLC) uses genetic algorithm to tune its parameters during learning phase. Finally, The performance of the intelligent FLC is compared with the performance of a FLC with predefined parameters and three simple fixed-time controller. Simulation results indicate that intelligent FLC significantly reduces the total delay in the network compared to the fixed-time method and FLC with manual parameter setting.

Dividing traffic sub-areas based on a parallel K-means algorithm

In order to alleviate the traffic congestion and reduce the complexity of traffic control and management, it is necessary to exploit traffic sub-areas division which should be effective in planing traffic. Some researchers applied the K-Means algorithm to divide traffic sub-areas on the taxi trajectories. However, the traditional K-Means algorithms faced difficulties in processing large-scale Global Position System(GPS) trajectories of taxicabs with the restrictions of memory, I/O, computing performance. This paper proposes a Parallel Traffic Sub-Areas Division(PTSD) method which consists of two stages, on the basis of the Parallel K-Means(PKM) algorithm. During the first stage, we develop a process to cluster traffic sub-areas based on the PKM algorithm. Then, the second stage, we identify boundary of traffic sub-areas on the base of cluster result. According to this method, we divide traffic sub-areas of Beijing on the real-word (GPS) trajectories of taxicabs. The experiment and discussion show that the method is effective in dividing traffic sub-areas.

Intelligent cuckoo search optimized traffic signal controllers for multi-intersection network

Traffic congestion in urban roads is one of the biggest challenges of 21 century. Despite a myriad of research work in the last two decades, optimization of traffic signals in network level is still an open research problem. This paper for the first time employs advanced cuckoo search optimization algorithm for optimally tuning parameters of intelligent controllers. Neural Network (NN) and Adaptive Neuro-Fuzzy Inference System (ANFIS) are two intelligent controllers implemented in this study. For the sake of comparison, we also implement Q-learning and fixed-time controllers as benchmarks. Comprehensive simulation scenarios are designed and executed for a traffic network composed of nine four-way intersections. Obtained results for a few scenarios demonstrate the optimality of trained intelligent controllers using the cuckoo search method. The average performance of NN, ANFIS, and Q-learning controllers against the fixed-time controller are 44%, 39%, and 35%, respectively.

Design of an optimal ANFIS traffic signal controller by using cuckoo search for an isolated intersection

An optimal design of Adaptive Neuro-Fuzzy Inference System (ANFIS) traffic signal controller is presented in this paper. The proposed controller aims to adjust a set of green times for traffic lights in a single intersection with the purpose of minimizing travel delay time and traffic congestion. The ANFIS controller is trained, to learned how to set green times for each traffic phase. This intelligent controller uses the Cuckoo Search (CS) algorithm to tune its parameters during the learning pried. Evaluating the performance of the proposed controller in comparison with the performance of a FLS controller (FLC) with predefined rules and membership functions, and also three fixed-Time controllers, illustrates the better performance of the optimal ANFIS controller against the other benchmark controllers.

Computational intelligence-based traffic signal timing optimization

 Traffic congestion has explicit effects on productivity and efficiency, as well as side effects on environmental sustainability and health. Controlling traffic flows at intersections is recognized as a beneficial technique, to decrease daily travel times. This thesis applies computational intelligence to optimize traffic signals' timing and reduce urban traffic.

Distributed Q-learning controller for a multi-intersection traffic network

This paper proposes a Q-learning based controller for a network of multi intersections. According to the increasing amount of traffic congestion in modern cities, using an efficient control system is demanding. The proposed controller designed to adjust the green time for traffic signals by the aim of reducing the vehicles’ travel delay time in a multi-intersection network. The designed system is a distributed traffic timing control model, applies individual controller for each intersection. Each controller adjusts its own intersection’s congestion while attempt to reduce the travel delay time in whole traffic network. The results of experiments indicate the satisfied efficiency of the developed distributed Q-learning controller.

Cost-effectiveness of active transport for primary school children - Walking School Bus Program

Background : To assess from a societal perspective the incremental cost-effectiveness of the Walking School Bus (WSB) program for Australian primary school children as an obesity prevention measure. The intervention was modelled as part of the ACE-Obesity study, which evaluated, using consistent methods, thirteen interventions targeting unhealthy weight gain in Australian children and adolescents.

Methods : A logic pathway was used to model the effects on body mass index [BMI] and disability-adjusted life years [DALYs] of the Victorian WSB program if applied throughout Australia. Cost offsets and DALY benefits were modelled until the eligible cohort reached 100 years of age or death. The reference year was 2001. Second stage filter criteria ('equity', 'strength of evidence', 'acceptability', feasibility', sustainability' and 'side-effects') were assessed to incorporate additional factors that impact on resource allocation decisions.

Results : The modelled intervention reached 7,840 children aged 5 to 7 years and cost $AUD22.8M ($16.6M;$30.9M). This resulted in an incremental saving of 30 DALYs (7:104) and a net cost per DALY saved of $AUD0.76M ($0.23M; $3.32M). The evidence base was judged as 'weak' as there are no data available documenting the increase in the number of children walking due to the intervention. The high costs of the current approach may limit sustainability.

Conclusions : Under current modelling assumptions, the WSB program is not an effective or cost-effective measure to reduce childhood obesity. The attribution of some costs to non-obesity objectives (reduced traffic congestion and air pollution etc.) is justified to emphasise the other possible benefits. The program's cost-effectiveness would be improved by more comprehensive implementation within current infrastructure arrangements. The importance of active transport to school suggests that improvements in WSB or its variants need to be developed and fully evaluated.

One line lacks density : A study of the associations between cartographic representation and ontology

One way to represent and communicate density in the spatial disciplines including architecture, town planning and geography is through the map, plan or aerial photograph. These media and tools are generally perceived to be objective and analytical modes of practice. But what else do these modes of representation mediate? The paper will respond to this question by exploring notions of ontology, notions of dwelling and being in relation to lines and drawing techniques. A map or plan is an image, in addition to a mode of communication, and affects visual pleasure. As proposals of an unbuilt world and documents of existing environment, drawings contain lines of desire. The thesis is that the lines provide a corporeal framework for an imaginary projection between the viewer and a ‘real’ built environment. The paper becomes focussed on the specifics of the ‘green line’ that has represented post-war Beirut, and is typical of representation of sites of conflict.

In the plans of post-war Beirut an almost straight line running from the top to the bottom of the page is highlighted and represents a trajectory from the Place des Martyr to the Pine Forest. To descend from this metaphoric height of the map into the streets of Beirut is to confront urban density, traffic congestion, pollution exacerbated by dust, and a lack of greenery. During the war much of the fighting occurred across this marker, and since, it has been described as an empty neutral space due to the destruction of edifices on either side, and is often proposed as the only appropriate site for building projects of national significance. Is its emptiness an a priori condition of imaginary projections? Will it remain forever empty of the density everywhere else in Beirut? Who wants to dwell there?
This paper will examine the several nuances of the ‘green line’ and what role it plays between representation and defining ontological environments.

Tomorrow’s car – for today’s people : can tilting three wheeled vehicles be a solution for the problems of today and the future?

The current automotive industry and todays car drivers are faced with every increasing challenges, not previously experienced. Climate Change, financial issues, rising fuel prices, increased traffic congestion and reduced parking space in cities are all leading to changes in consumer preferences and the requirements of modern passenger vehicles. However, despite the shift in the industry dynamics, the principal layout of a car hasn’t changed since its invention. The design of a ’conventional’ vehicle is still principally a matchbox with four wheels, one at each corner. The concept has served its purpose well for over 100 years, but such a layout is not suited to solving today’s problems. To address the range of problems faced by the industry, a number of alternative commuting vehicles have been developed. Yet the commercialization of these ‘alternative’ vehicles has yet to be successful. This is largely due failure of these vehicles to meet the changing demands of the industry and the limited understanding of consumer behaviour, motivation and attitudes. Deakin University’s Tomorrow’s Car concept tackles all of these problems. The vehicle is a novel three-wheeler cross over concept between a car and a motorbike that combines the best of both worlds. The vehicle combines the low cost, small size and ‘fun’ factor of a motorbike together with the safety, comfort and easy to drive features of a car produce a vehicle with a fuel efficiency better than either car or scooter. Intensive market research has been conducted for various major potential markets of alternative vehicles including India, China and Australia. The research analysed consumer attitudes in relation to narrow tilting vehicles, and in particular towards Deakin’s Tomorrow’s Car (TC). The study revealed that a relatively large percentage of consumers find such a concept very appealing. For the other consumers, the overall appearance and perception of safety and not the actual safety performance were found to be the most impeding factors of such vehicles. By addressing these issues and marketing the vehicle accordingly the successful commercialization of Tomorrow’s Car can be ensured.

Multimedia stream rate control over MANET based on router feedback

Streaming applications over Mobile Ad-hoc Networks (MANET) require a smooth transmission rate. The Internet is unable to provide this service during traffic congestion in the network. Designing congestion control for these applications is challenging, because the standard TCP congestion control mechanism is not able to handle the special properties of a shared wireless multi hop channel well. In particular, the frequent changes to the network topology and the shared nature of the wireless channel pose major challenges. In this paper, we propose a novel approach, which allows a quick increase of throughput by using explicit feedback from routers.