Humanoid traffic control robot

A traffic control device in the form of a humanoid character robot, doll or dummy is used to warn driver of danger ahead on the road. The device can be used on roads, streets and in other sites where there are moving vehicles. The robotic device informs drivers of impending danger by moving its arms and sounding an acoustic alarm. In this way the robot can simulate a policeman or road flagging operator. The device may also include speed detection and preferably speed indication means. The robot may make decisions based on the detected speed of a vehicle and the limit for the area in operating the arms and sound warning means. The robot may also be equipped with a camera or video. The robot may also be controlled wirelessly.

Observer-based decentralized approach to robotic formation control

Control of a group of mobile robots in a formation requires not only environmental sensing but also communication among vehicles. Enlarging the size of the platoon of vehicles causes difficulties due to communications bandwidth limitations. Decentralized control may be an appropriate approach in those cases when the states of all vehicles cannot be obtained in a centralized manner. This paper presents a solution to the problem of decentralized implementation of a global state-feedback controller for N mobile robots in a formation. The proposed solution is based on the design of functional observers to estimate asymptotically the global state-feedback control signals by using the corresponding local output information and some exogenous global functions. The proposed technique is tested through simulation and experiments for the control of groups of Pinoneer-based non-holonomic mobile robots.

Dividing traffic sub-areas based on a parallel K-means algorithm

In order to alleviate the traffic congestion and reduce the complexity of traffic control and management, it is necessary to exploit traffic sub-areas division which should be effective in planing traffic. Some researchers applied the K-Means algorithm to divide traffic sub-areas on the taxi trajectories. However, the traditional K-Means algorithms faced difficulties in processing large-scale Global Position System(GPS) trajectories of taxicabs with the restrictions of memory, I/O, computing performance. This paper proposes a Parallel Traffic Sub-Areas Division(PTSD) method which consists of two stages, on the basis of the Parallel K-Means(PKM) algorithm. During the first stage, we develop a process to cluster traffic sub-areas based on the PKM algorithm. Then, the second stage, we identify boundary of traffic sub-areas on the base of cluster result. According to this method, we divide traffic sub-areas of Beijing on the real-word (GPS) trajectories of taxicabs. The experiment and discussion show that the method is effective in dividing traffic sub-areas.

Design of a distributed power system stabiliser

A new design method for a distributed power system stabiliser for interconnected power systems is introduced in this paper. The stabiliser is of a low order, dynamic and robust. To generate the required local control signals, each local stabiliser requires information about either the rotor speed or the load angle of the other subsystems. A simple MATLAB based design algorithm is given and used on a three-machine unstable power system. The resulting stabiliser is simulated and sample results are presented.

Design of a distributed power system stabiliser

A new design method for a distributed power system stabiliser for interconnected power systems is introduced in this paper. The stabiliser is of a low order, dynamic and robust. To generate the required local control signals, each local stabiliser requires information about either the rotor speed or the load angle of the other subsystems. A simple MATLAB based design algorithm is given and used on a three-machine unstable power system. The resulting stabiliser is simulated and sample results are presented.

Implementation of fuzzy logic maximum power point tracking controller for photovoltaic system

In this study, simulation and hardware implementation of Fuzzy Logic (FL) Maximum Power Point Tracking (MPPT) used in photovoltaic system with a direct control method are presented. In this control system, no proportional or integral control loop exists and an adaptive FL controller generates the control signals. The designed and integrated system is a contribution of different aspects which includes simulation, design and programming and experimental setup. The resultant system is capable and satisfactory in terms of fastness and dynamic performance. The results also indicate that the control system works without steady-state error and has the ability of tracking MPPs rapid and accurate which is useful for the sudden changes in the atmospheric condition. MATLAB/Simulink software is utilized for simulation and also programming the TMS320F2812 Digital Signal Processor (DSP). The whole system designed and implemented to hardware was tested successfully on a laboratory PV array. The obtained experimental results show the functionality and feasibility of the proposed controller.

Speed control and policing in a cellular mobile network: speedNet

In this paper, we describe SpeedNet, a GSM network variant which resembles an ad hoc wireless mobile network where base stations keep track of the velocities of mobile users (cars). SpeedNet is intended to track mobile users and their speed passively for both speed policing and control of traffic. The speed of the vehicle is controlled in a speed critical zone by means of an electro-mechanical control system, suitably referred to as VVLS (Vehicular Velocity Limiting System). VVLS is mounted on the vehicle and responds to the command signals generated by the base station. It also determines the next base station to handoff, in order to improve the connection reliability and bandwidth efficiency of the underlying network. Robust Extended Kalman Filter (REKF) is used as a passive velocity estimator of the mobile user with the widely used proportional and integral controller speed control. We demonstrate through simulation and analysis that our prediction algorithm can successfully estimate the mobile user’s velocity with low system complexity as it requires two closest mobile base station measurements and also it is robust against system uncertainties due to the inherent deterministic nature in the mobility model.

Speed control and policing in a cellular mobile network: SpeedNet

In this paper, we describe SpeedNet, a GSM network variant which resembles an ad hoc wireless mobile network where base stations (possibly other vehicles in the network) keep track of the velocities of mobile users (cars). SpeedNet is intended to track mobile users and their speed passively for both speed policing and control of traffic. The speed of the vehicle is controlled in a speed critical zone by means of an electro-mechanical control system, suitably referred to as VVLS (vehicular velocity limiting system). VVLS is mounted in the vehicle and responds to the command signals generated by the base station. It also determines the next basestation to handoff, in order to improve the connection reliability and bandwidth efficiency of the underlying network. Robust extended Kalman filter (REKF) is used as a passive velocity estimator of the mobile user with the widely used proportional and integral controller speed control. We demonstrate through simulation and analysis that our prediction algorithm can successfully estimate the mobile users velocity with low system complexity as it requires two closet mobile-base station measurement and also it is robust against system uncertainties due to the inherent deterministic nature in the mobility model.

A flow control methodology for the rapid generation of vehicle traffic models

This paper presents a conveyor-based methodology to model complex vehicle flows common to factory and distribution warehouse facilities. The AGV and human path modelling techniques available in many commercial discrete event simulation packages require extensive knowledge and time to implement even the simplest flow control rules for multiple vehicle interaction. Although discrete event simulation is accepted as an effective tool to model vehicle delivery movements, human paths and delivery schedules for modern assembly lines, the time to generate accurate models is a significant limitation of existing simulation-based optimisation methodologies. The flow control method has been successfully implemented using two commercial simulation packages. It provides a realistic visual representation, as well as accurate statistical results, and reduces the model development process cost.

Video driven traffic modelling

We propose Video Driven Traffic Modelling (VDTM) for accurate simulation of real-world traffic behaviours with detailed information and low-cost model development and maintenance. Computer vision techniques are employed to estimate traffic parameters. These parameters are used to build and update a traffic system model. The model is simulated using the Paramics traffic simulation platform. Based on the simulation techniques, effects of traffic interventions can be evaluated in order to achieve better decision makings for traffic management authorities. In this paper, traffic parameters such as vehicle types, times of starting trips and corresponding origin-destinations are extracted from a video. A road network is manually defined according to the traffic composition in the video, and individual vehicles associated with extracted properties are modelled and simulated within the defined road network using Paramics. VDTM has widespread potential applications in supporting traffic decision-makings. To demonstrate the effectiveness, we apply it in optimizing a traffic signal control system, which adaptively adjusts green times of signals at an intersection to reduce traffic congestion.

Intelligent traffic light control of isolated intersections using machine learning methods

Traffic congestion is one of the major problems in modern cities. This study applies machine learning methods to determine green times in order to minimize in an isolated intersection. Q-learning and neural networks are applied here to set signal light times and minimize total delays. It is assumed that an intersection behaves in a similar fashion to an intelligent agent learning how to set green times in each cycle based on traffic information. Here, a comparison between Q-learning and neural network is presented. In Q-learning, considering continuous green time requires a large state space, making the learning process practically impossible. In contrast to Q-learning methods, the neural network model can easily set the appropriate green time to fit the traffic demand. The performance of the proposed neural network is compared with two traditional alternatives for controlling traffic lights. Simulation results indicate that the application of the proposed method greatly reduces the total delay in the network compared to the alternative methods.

A review on computational intelligence methods for controlling traffic signal timing

Urban traffic as one of the most important challenges in modern city life needs practically effective and efficient solutions. Artificial intelligence methods have gained popularity for optimal traffic light control. In this paper, a review of most important works in the field of controlling traffic signal timing, in particular studies focusing on Q-learning, neural network, and fuzzy logic system are presented. As per existing literature, the intelligent methods show a higher performance compared to traditional controlling methods. However, a study that compares the performance of different learning methods is not published yet. In this paper, the aforementioned computational intelligence methods and a fixed-time method are implemented to set signals times and minimize total delays for an isolated intersection. These methods are developed and compared on a same platform. The intersection is treated as an intelligent agent that learns to propose an appropriate green time for each phase. The appropriate green time for all the intelligent controllers are estimated based on the received traffic information. A comprehensive comparison is made between the performance of Q-learning, neural network, and fuzzy logic system controller for two different scenarios. The three intelligent learning controllers present close performances with multiple replication orders in two scenarios. On average Q-learning has 66%, neural network 71%, and fuzzy logic has 74% higher performance compared to the fixed-time controller.

Distributed Q-learning controller for a multi-intersection traffic network

This paper proposes a Q-learning based controller for a network of multi intersections. According to the increasing amount of traffic congestion in modern cities, using an efficient control system is demanding. The proposed controller designed to adjust the green time for traffic signals by the aim of reducing the vehicles’ travel delay time in a multi-intersection network. The designed system is a distributed traffic timing control model, applies individual controller for each intersection. Each controller adjusts its own intersection’s congestion while attempt to reduce the travel delay time in whole traffic network. The results of experiments indicate the satisfied efficiency of the developed distributed Q-learning controller.

A congestion control scheme based on fuzzy logic in wireless body area networks

One of the major challenges in healthcare wireless body area network (WBAN) applications is to control congestion. Unpredictable traffic load, many-to-one communication nature and limited bandwidth occupancy are among major reasons that can cause congestion in such applications. Congestion has negative impacts on the overall network performance such as packet losses, increasing end-to-end delay and wasting energy consumption due to a large number of retransmissions. In life-critical applications, any delay in transmitting vital signals may lead to death of a patient. Therefore, in order to enhance the network quality of service (QoS), developing a solution for congestion estimation and control is imperative. In this paper, we propose a new congestion detection and control protocol for remote monitoring of patients health status using WBANs. The proposed system is able to detect congestion by considering local information such as buffer capacity and node rate. In case of congestion, the proposed system differentiates between vital signals and assigns priorities to them based on their level of importance. As a result, the proposed approach provides a better quality of service for transmitting highly important vital signs.