Robust finite-time tracking control of nonholonomic mobile robots without velocity measurements

The problem of robust finite-time trajectory tracking of nonholonomic mobile robots with unmeasurable velocities is studied. The contributions of the paper are that: first, in the case that the angular velocity of the mobile robot is unmeasurable, a composite controller including the observer-based partial state feedback control and the disturbance feed-forward compensation is designed, which guarantees that the tracking errors converge to zero in finite time. Second, if the linear velocity as well as the angular velocity of mobile robot is unmeasurable, with a stronger constraint, the finite-time trajectory tracking control of nonholonomic mobile robot is also addressed. Finally, the effectiveness of the proposed control laws is demonstrated by simulation.

Spiking neural network-based target tracking control for autonomous mobile robots

In this paper, a target tracking controller based on spiking neural network is proposed for autonomous robots. This controller encodes the preprocessed environmental and target information provided by CCD cameras, encoders and ultrasonic sensors into spike trains, which are integrated by a three-layer spiking neural network (SNN). The outputs of SNN are generated based on the competition between the forward/backward neuron pair corresponding to each motor, with the weights evolved by the Hebbian learning. The application to target tracking of a mobile robot in unknown environment verifies the validity of the proposed controller.

Robust finite-time consensus tracking algorithm for multirobot systems

This paper studies the finite-time consensus tracking control for multirobot systems. We prove that finite-time consensus tracking of multiagent systems can be achieved on the terminal sliding-mode surface. Also, we show that the proposed error function can be modified to achieve relative state deviation between agents. These results are then applied to the finite-time consensus tracking control of multirobot systems with input disturbances. Simulation results are presented to validate the analysis.

Observer-based robust finite-time cooperative consensus control for multi-agent networks

This paper studies the finite-time consensus tracking control for multi-agent networks. The time-varying control input and the velocity of the leader is unknown to any follower. Only the position of the leader is known to its neighbors. We first propose a new finite-time multiple-surface sliding mode observer to estimate the leader's velocity. It is seen that the estimation error of the observer can converge to zero in a finite time. Then, we prove that finite-time consensus tracking of multi-agent networks can be achieved on a new terminal sliding mode surface. Simulation results are presented to validate the analysis.

DSP-based sliding-mode control for electromagnetic-levitation precise position system

This paper investigates the robust tracking control problem for a bipolar electromagnetic-levitation precise-position system. The dynamic model of the precise-position device is derived by conducting a thorough analysis on the nonlinear electromagnetic forces. Conventional sliding-mode control and terminal sliding-mode control strategies are developed to guarantee asymptotic and finite-time tracking capabilities of the closed-loop system. A lumped uncertainty estimator is proposed to estimate the system uncertainties. The estimated information is then used to construct a smooth uniformly ultimately bounded sliding-mode control. An exact estimator is also proposed to exactly estimate the unknown uncertainties in finite time. The output of the exact estimator is used to design a continuous chattering free terminal sliding-mode control. The time taken for the closed-loop system to reach zero tracking error is proven to be finite. Experiment results are presented, using a real time digital-signal-processor (DSP) based electromagnetic-levitation system to validate the analysis.

An active stereo vision-based learning approach for robotic tracking, fixating and grasping control

In this paper, an active stereo vision-based learning approach is proposed for a robot to track, fixate and grasp an object in unknown environments. First, the functional mapping relationships between the joint angles of the active stereo vision system and the spatial representations of the object are derived and expressed in a three-dimensional workspace frame. Next, the self-adaptive resonance theory-based neural networks and the feedforward neural networks are used to learn the mapping relationships in a self-organized way. Then, the approach is verified by simulation using the models of an active stereo vision system which is installed in the end-effector of a robot. Finally, the simulation results confirm the effectiveness of the present approach.

Speed control and policing in a cellular mobile network: speedNet

In this paper, we describe SpeedNet, a GSM network variant which resembles an ad hoc wireless mobile network where base stations keep track of the velocities of mobile users (cars). SpeedNet is intended to track mobile users and their speed passively for both speed policing and control of traffic. The speed of the vehicle is controlled in a speed critical zone by means of an electro-mechanical control system, suitably referred to as VVLS (Vehicular Velocity Limiting System). VVLS is mounted on the vehicle and responds to the command signals generated by the base station. It also determines the next base station to handoff, in order to improve the connection reliability and bandwidth efficiency of the underlying network. Robust Extended Kalman Filter (REKF) is used as a passive velocity estimator of the mobile user with the widely used proportional and integral controller speed control. We demonstrate through simulation and analysis that our prediction algorithm can successfully estimate the mobile user’s velocity with low system complexity as it requires two closest mobile base station measurements and also it is robust against system uncertainties due to the inherent deterministic nature in the mobility model.

Robust control applied to metal spraying for rapid tooling

The spray forming process is a novel method of rapidly manufacturing tools and dies for stamping and injection operations. The process sprays molten tool steel from a set of arc spray guns onto a ceramic former to build up a thick steel shell. The volumetric contraction that occurs as the steel cools is offset by a volumetric expansion taking place within the sprayed steel, which allows the dimensional accurate tools to be produced. To ensure that the required phase transformation takes place, the temperature of the steel is regulated during spraying. The sprayed metal acts both as a source of mass and a source of heat and by adjusting the rate at which metal is sprayed; the surface temperature profile over the surface of the steel can be controlled. The temperature profile is measured using a thermal imaging camera and regulated by adjusting the rate at which the guns spray the steel. Because the temperature is regulated by adjusting the feed rate to an actuator that is moving over the surface, this is an example of mobile control, which is a class of distributed parameter control. The dynamic system has been controlled using a PI controller before. The paper describes the application of H∞ tracking type controller as the desire was for the average temperature to follow a desired profile. A study on the controllability of the underlying system was aimed at.

Location based power control for mobile devices in a cellular network

This paper provides location estimation based power control strategy for cellular radio systems via a location based interference management scheme. Our approach considers the carrier-to-interference as dependent on the transmitter and receiver separation distance and therefore an accurate estimation of the precise locations can provide the power critical mobile user to control the transition power accordingly. In this fully
distributed algorithms, we propose using a Robust Extended Kalman Filter (REKF) to derive an estimate of the mobile user’s closest mobile base station from the user’s location, heading and altitude. Our analysis demonstrates that this algorithm can successfully track the mobile users with less system complexity, as it requires measurements from only one or two closest mobile base stations and hence enable the user to transmit at the rate that is sufficient for the interference management. Our power control
algorithms based on this estimation converges to the desired power trajectory. Further, the technique is robust against system uncertainties caused by the inherent deterministic nature of the mobility model. Through simulation, we show the accuracy of our prediction algorithm and the simplicity of its implementation.

Location based power control for energy critical sensors in a disconnected network

This paper provides a location based power control strategy for disconnected sensory nodes deployed for long term service. Power conservation is of importance particularly when sensors communicate with a mobile robot used for data collection. The proposed algorithm uses estimations from a Robust Extended Kalman Filter (REKF) with RSSI measurements, in implementing a sigmoid function based power control algorithm which essentially approaches a desired power emission trajectory based on carrier-to-interference ratios(CIR) to ensure interferenceless reception. The more realistic modelling we use incorporates physical dynamics between the mobile robot and the sensors together with the wireless propagation parameters between the transmitter and receiver to formulate a sophisticated and effective power control strategy for the exclusive usage of energy critical disconnected nodes in a sensory network increasing their life span.

Robust parallel filtering design of a swarm tracking system

Swarming networks of mobile autonomous agents require inter-agent position information in order perform various tasks. The primary control input for the majority of current control strategies is inter-agent distance information. In this paper we provide a robust parallel filter based tracking scheme that allows a mobile agent to track other multiple mobile agents. The distance, angle, and relative position is given in a direct target tracking output. This allows the mobile agent to decide which information is best suited for the particular objective

Vision based target tracking using robust linear filtering

The use of perspective projection in tracking a target from a video stream involves nonlinear observations. The target dynamics, however, are modeled in Cartesian coordinates and result in a linear system. In this paper we provide a robust version of a linear Kalman filter and perform a measurement conversion technique on the nonlinear optical measurements. We show that our linear robust filter significantly outperforms the Extended Kalman Filter. Moreover, we prove that the state estimation error is bounded in a probabilistic sense.

Wearing a sports compression garment on the performance of visuomotor tracking following eccentric exercise : a pilot study

Clinical compression garments have been shown to improve functional control in patients with motor impairments, however, investigation in functional control has not been observed whilst wearing sports compression garments. This pilot study assessed motor control changes in the bicep brachii muscle following a bout of eccentric exercise designed to induce delayed onset muscle soreness for intervals up to 14 days after exercise. Eight male participants performed 35 maximal isokinetic eccentric extensions at 90° s−1. Participants where then randomly divided into one of two groups to perform a one-dimensional elbow flexion/extension visuomotor tracking task; one group wore a sports compression garment during the task, the other acted as control (no garment). The group who wore the compression garment performed the tracking task significantly better immediately post-exercise, and at days 1, 2 and 3 post-exercise (p ≤ 0.05). Non-significant but large and moderate effects sizes (ES), in tracking, were found between the two groups on day 5 (ES = 1.3) and day 7 (ES = 0.7), respectively. Further research is necessary to elucidate these preliminary findings, however, the results suggest that the wearing of sports compression garments post-eccentric exercise has a positive effect on functional motor control.