Bubble flow in a static magnetic field

A lab-based electrolytic-cell is designed to analyze the effect of external magnetic field on bubble evolution underneath an anode surface. Buckingham Pi theorem is used to provide a complete list of dimensionless parameters for a typical cell configuration. There is an increase in bubble size and the number of bubbles with time. The hydrodynamic convection is apparent due to the effect of electrolyte flow caused by swarm of bubbles rising along the anode surface. The image sequence shows that swarm of bubbles exhibit a swirling flow-field in the presence of the magnetic field. The coalescence process intensifies in an area where magnetic field is higher. As a consequence, bubbles are swept away by the magneto-hydrodynamic (MHD) convection. These results suggest that a magnetic field causes remarkable improvement on the surface coverage of the anode.

Passive flow through an unstalked intertidal ascidian: Orientation and morphology enhance suspension feeding in Pyura stolonifera

Passive flow is believed to increase the gains and reduce the costs of active suspension feeding. We used a mixture of field and laboratory experiments to evaluate whether the unstalked intertidal ascidian Pyura stolonifera exploits passive flow. We predicted that its orientation to prevailing currents and the arrangement of its siphons would induce passive flow due to dynamic pressure at the inhalant siphon, as well as by the Bernoulli effect or viscous entrainment associated with different fluid velocities at each siphon, or by both mechanisms. The orientation of P. stolonifera at several locations along the Sydney-Illawarra coast (Australia) covering a wide range of wave exposures was nonrandom and revealed that the ascidians were con- sistently oriented with their inhalant siphons directed into the waves or backwash. Flume experiments using wax mod- els demonstrated that the arrangement of the siphons could induce passive flow and that passive flow was greatest when the inhalant siphon was oriented into the flow. Field exper- iments using transplanted animals confirmed that such an orientation resulted in ascidians gaining food at greater rates, as measured by fecal production, than when oriented perpendicular to the wave direction. We conclude that P. stolonifera enhances suspension feeding by inducing pas- sive flow and is, therefore, a facultatively active suspension feeder. Furthermore, we argue that it is likely that many other active suspension feeders utilize passive flow and, therefore, measurements of their clearance rates should be made under appropriate conditions of flow to gain ecolog- ically relevant results.

Mixing characterisation for a serpentine microchannel equipped with embedded barriers

This paper describes the design, simulation, fabrication and experimental analysis of a passive micromixer for the mixing of biological solvents. The mixer consists of a T-junction, followed by a serpentine microchannel. the serpentine has three arcs, each equipped with circular barriers that are patterned as two opposing triangles. >The barriers are engineered to induce periodic perturbations in the flow field and enhance the mixing. CFD (Computational Fluid Dynamics) method is applied to optimise the geometric variables of the mixer before fabrication. The mixer is made from PDMS (Polydimethylsiloxane) using photo- and soft-lithography techniques. Experimental measurements are performed using yellow and blue food dyes as the mixing fluids. The mixing is measured by analysing the composition of the flow's colour across the outlet channel. The performance of the mixer is examined in a wide range of flow rates from 0.5 to 10 µl/min. Mixing efficiencies of higher than 99.4% are obtained in the experiments confirming the results of numerical simulations. The proposed mixer can be employed as a part of lab-on-a-chip for biomedical applications.

Tracking single bubble in Hall-Héroult aluminium cell : an experimental and numerical study

In simulations of the hydrodynamics of the multiphase flow in gas– liquid systems with finite sizes of bubbles, the important thing is to compute explicitly the time evolution of the gas–liquid interface in many engineering applications. The most commonly used methods representing this approach are: the volume of fluid and the phase field methods. The later has gained significant interest because of its capability of performing numerical computations on a fixed Cartesian grid without having to parametrise these objects (Eulerian approach) and at the same time it allows to follow the interface ( for example bubble’s shape) that change the topology. In this paper, both numerical (phase field method) and experimental results for the bubble shapes underneath a downward facing plane is presented. Experiments are carried out to see the bubble sliding motion underneath a horizontal and inclined anode. It is assumed that the bubble formed under the anode surface is deformed (flattened) due to buoyant field before it goes around the anode corner. The bubble elongates to form a tail-like shape. The change in shape of the bubble is almost instantaneous and has a significant effect on the localised hydrodynamics around the bubble, which could influence the dynamics of the flow patterns in the Hall–Héroult cell. This deformation is the main cause of the bubble wake and the induced flow field in the aluminium cell. Various parameters such as bubble size, deformation and its sliding mechanism at different surface tensions are discussed and compared with experimental results.

Derivation of turbulent energy of fiber suspensions

The energy equation for turbulent flow of fiber suspensions was derived in terms of second order correlation tensors. Fiber motion of turbulent energy including the correlation between pressure fluctuations and velocity fluctuations was discussed at two points of flow field, at which the correlation tensors were the functions of space coordinates, distance between two points, and time.

Directional moisture transfer through a wild silkworm cocoon wall

A silkworm cocoon is a porous biological structure with multiple protective functions. In the current work, the authors have used both experimental and numerical methods to reveal the unique moisture transfer characteristics through a wild Antheraea pernyi silkworm cocoon wall, in comparison with the long-domesticated Bombyx mori silkworm cocoon walls. The water vapor transmission and water vapor permeability (WVP) properties show that the A. pernyi cocoons exhibit directional moisture transfer behavior, with easier moisture transfer from inside out than outside in [e.g., the average WVP is 0.057 g/(h m bar) from inside out and is 0.034 g/(h m bar) from outside in]. Numerical analysis shows that the cubic mineral crystals in the outer section of the A. pernyi cocoon wall create a rough surface that facilitates air turbulence and promotes disturbance amplitude of the flow field, leading to lengthened water vapor transfer path and increased tortuosity of the moist air. It also indicates the vortex of water vapor can be generated in the outer section of cocoon wall, which increases the diffusion distance of water vapor and enhances the turbulence kinetic energy and turbulence eddy dissipation, signifying higher moisture resistance in the outer section. The difference in moisture resistance of the multiple A. pernyi cocoon layers is largely responsible for the unique directional moisture transfer behavior of this wild silkworm cocoon. These findings may inspire a biomimicry approach to develop novel lightweight moisture management materials and structures.

Towards simulation of NASA35 axial compressor

Purpose – This paper aims to validate and analyse the NASA35 axial compressor performance based on a numerical approach. Design/methodology/approach – Knowledge about flow property change during compressor operation at high and relatively low speed is still limited. This work provides a numerical approach to address these problems. Validation of numerical methods is proposed to generate confidence the numerical approach adopted, and after that, analysis of compressor performance at different operation conditions is carried out. Findings – The numerical methods proposed are proved capable in predicting compressor performance. Changes of flow property during compressor operation are discussed and explained. Research limitations/implications – The current numerical work is carried out based on the first stage of the NASA35 axial compressor, where the interactive effects from adjacent stage are not counted in. Furthermore, the steady-state simulation enforces an averaging of flow at rotor-stator interface, where the transient rotor-stator interaction is removed. Practical implications – This work validates the numerical methods used in the prediction of NASA35 axial compressor performance, and a similar numerical approach can be used for other turbomachinery simulation cases. Originality/value – This work reinforces the understanding of axial compressor operation and provides reliable results for further investigation of a similar type of compressor. In addition, details of flow field within the NASA35 compressor during operation are given and explained which experiments still have difficult to achieve.

Study of KJ-66 micro gas turbine compressor: steady and unsteady Reynolds-averaged Navier-Stokes approach

Numerical study on the compressor stage of a KJ-66 micro gas turbine was conducted in this paper through both steady and unsteady Reynolds-averaged Navier–Stokes. The study was conducted for the numerical prediction of micro gas turbine compressor performance at various operation conditions, with special attention given to the transient flow behaviors during compressor operation. The numerical results showed reasonable agreements with experimental data while providing predictions for the charting of compressor performance map at various operation speeds. The simulation results indicated that the increase of operation speed from 80 k r/min to 117 k r/min would leads to an increased peak total pressure ratio from 1.54 to 1.96, while decreasing the peak adiabatic efficiency from 0.73 to 0.55. This paper also provided discussion on details of transient flow field within the compressor stage as well as demonstrated the smooth flow transition through rotor–stator interactions.

Numerical investigation of the turbulent energy budget in the wake of freely oscillating elastically mounted cylinder at low reduced velocities

We present a numerical study of the turbulent kinetic energy budget in the wake of cylinders undergoing Vortex-Induced Vibration (VIV). We show three-dimensional Large Eddy Simulations (LES) of an elastically mounted circular cylinder in the synchronization regime at Reynolds number of Re=8000. The Immersed Boundary Method (IBM) is used to account for the presence of the cylinder. The flow field in the wake is decomposed using the triple decomposition splitting the flow variables in mean, coherent and stochastic components. The energy transfer between these scales of motions are then studied and the results of the free oscillation are compared to those of a forced oscillation. The turbulent kinetic energy budget shows that the maximum amplitude of VIV is defined by the ability of the mean flow to feed energy to the coherent structures in the wake. At amplitudes above this maximum amplitude, the energy of the coherent structures needs to be fed additionally by small scale, stochastic energy in form of backscatter to sustain its motion. Furthermore, we demonstrate that the maximum amplitude of the VIV is defined by the integral length scale of the turbulence in the wake

Electrolyte flow in an external magnetic field: a dimensionless analysis

In this paper, some recent work on the flow induced by an external magnetic fields acting on electrochemical cell is reviewed. Although the influence of the magnetic field on the hydrodynamics has been studied for over 5 decades, the magnetohydrodynamics (MHD) remains relatively unfamiliar to all but a few research groups. There are nearly a countless number of dimensionless parameters in electrolytic flow (bubble induced flow) and MHD, but they have been introduced for convenience by different authors. The similitude parameter proposed by Solheim, Johansen, Rolseth, and Thonstad (1989) and Perron, Kiss, and Poncsák (2006) have been modified to provide a full set of parameters for electrolytic cell operating under external magnetic field. The bubble sliding characteristics underneath an inclined plane are studied using copper sulphate solution (as an electrolyte) in lab-based-scale and discussed.

Flow analysis based on a pulsed flow of solution: theory, instrumentation and applications

The increased demands placed on solution propulsion by programmed flow systems, such as sequential injection analysis, lab-on-value technology, bead injection and multi-commutation, has highlighted the inability of many conventional pumps to generate a smooth, consistent flow. A number of researchers have examined ways to overcome the inadvertent, uncontrolled pulsation caused by the mechanical action of peristaltic pumps. In contrast, we have developed instruments that exploit the characteristics of a reproducible pulsed flow of solution. In this paper, we discuss our instrumental approaches and some applications that have benefited from the use of a reproducible pulsed flow rather than the traditional linear flow approach. To place our approach in the context of the continuously developing field of flow analysis, an overview of other programmed flow systems is also presented.

Computational simulation of gas flow and heat transfer near an immersed object in fluidized beds

To improve the understanding of the heat transfer mechanism and to find a reliable and simple heat-transfer model, the gas flow and heat transfer between fluidized beds and the surfaces of an immersed object is numerically simulated based on a double particle-layer and porous medium model. The velocity field and temperature distribution of the gas and particles are analysed during the heat transfer process. The simulation shows that the change of gas velocity with the distance from immersed surface is consistent with the variation of bed voidage, and is used to validate approximately dimensional analysing result that the gas velocity between immersed surface and particles is 4.6Umf/εmf. The effects of particle size and particle residence time on the thermal penetration depth and the heat-transfer coefficients are also discussed.

Identification of moving obstacles with pyramidal Lucas Kanade optical flow and k means clustering

This paper describes the methodology for identifying moving obstacles by obtaining a reliable and a sparse optical flow from image sequences. Given a sequence of images, basically we can detect two-types of on road vehicles, vehicles traveling in the opposite direction and vehicles traveling in the same direction. For both types, distinct feature points can be detected by Shi and Tomasi corner detector algorithm. Then pyramidal Lucas Kanade method for optical flow calculation is used to match the sparse feature set of one frame on the consecutive frame. By applying k means clustering on four component feature vector, which are to be the coordinates of the feature point and the two components of the optical flow, we can easily calculate the centroids of the clusters and the objects can be easily tracked. The vehicles traveling in the opposite direction produce a diverging vector field, while vehicles traveling in the same direction produce a converging vector field

A new modelling approach to simulate preferential flow and transport in water repellent media: parameter sensitivity, and effects on crop growth and solute leaching

A modified version of the popular agrohydrological model SWAP has been used to evaluate modelling of soil water flow and crop growth at field situations in which water repellency causes preferential flow. The parameter sensitivity in such situations has been studied. Three options to model soil water flow within SWAP are described and compared: uniform flow, the classical mobile-immobile concept, and a recent concept accounting for the dynamics of finger development resulting from unstable infiltration. Data collected from a severely water-repellent affected soil located in Australia were used to compare and evaluate the usefulness of the modelling options for the agricultural management of such soils.

The study shows that an assumption of uniform flow in a water-repellent soil profile leads to an underestimation of groundwater recharge and an overestimation of plant transpiration and crop production. The new concept of modelling taking finger dynamics into account provides greater flexibility and can more accurately model the observed effects of preferential flow compared with the classical mobile–immobile concept. The parameter analysis indicates that the most important factor defining the presence and extremity of preferential flow is the critical soil water content.

Comparison of the modelling results with the Australian field data showed that without the use of a preferential flow module, the effects of the clay amendments to the soil were insufficiently reproduced in the dry matter production results. This means that the physical characteristics of the soil alone are not sufficient to explain the measured increase in production on clay amended soils. However, modelling with the module accounting for finger dynamics indicated that the preferential flow in water repellent soils that had not been treated with clay caused water stress for the crops, which would explain the decrease in production.