Capping the SRO's sweet tooth

The consequences of the State Revenue Office's (SRO) liking for fixtures and its liberal interpretation of the definition of chattels have been coming before the Supreme Court regularly.

Experience of racism and tooth brushing among pregnant Aboriginal Australians: exploring psychosocial mediators

Despite burgeoning evidence regarding the pathways by which experiences of racism influence health outcomes, little attention has been paid to the relationship between racism and oral health-related behaviours in particular. We hypothesised that self-reported racism was associated with tooth brushing, and that this association was mediated by perceived stress and sense of control and moderated by social support.

Isolating conifer DNA: a superior polysaccharide elimination method

Genomic DNA was isolated from frozen needles of maturePinus radiata clones using a modified extraction technique incorporating cetyltrimethylammonium bromide (CTAB) for cell lysis. A high sodium chloride concentration (2 M) was used at 2 stages of the extraction procedure to eradicate polysaccharides, yielding pure genomic DNA suitable for restriction enzyme digestion and PCR amplification. Extractions were scaled down to suit 1.5-mL Eppendorf tubes, allowing easier handling and enhanced sterility.

Geometry and combinatorics of the cutting angle method

Lower approximation of Lipschitz functions plays an important role in deterministic global optimization. This article examines in detail the lower piecewise linear approximation which arises in the cutting angle method. All its local minima can be explicitly enumerated, and a special data structure was designed to process them very efficiently, improving previous results by several orders of magnitude. Further, some geometrical properties of the lower approximation have been studied, and regions on which this function is linear have been identified explicitly. Connection to a special distance function and Voronoi diagrams was established. An application of these results is a black-box multivariate random number generator, based on acceptance-rejection approach.

An early occurrence of Sarcophilus laniarius harrisii (Marsupialia, Dasyuridae) from the early Pleistocene of Nelson Bay, Victoria

The isolated lower molar series of a dasyurid from early Pleistocene sediments at Nelson Bay, near Portland, is referred herein to Sarcophilus laniarius harrisii (Boitard, 1842). Dental measurements and morphological comparisons taken from this tooth series compare closely with those of the extant subspecies. The genus Sarcophilus is known from the early Pleistocene by the species S. moornaensis Crabb 1982. Fossil material assigned to S. laniarius harrisii is now also known from Early Pleistocene sediments. The new specimens from Nelson Bay extend the origin of S. laniarius harrisii to the early Pleistocene.

Cutting angle method - a tool for constrained global optimization

Cutting angle method (CAM) is a deterministic global optimization technique applicable to Lipschitz functions f: Rn → R. The method builds a sequence of piecewise linear lower approximations to the objective function f. The sequence of solutions to these relaxed problems converges to the global minimum of f. This article adapts CAM to the case of linear constraints on the feasible domain. We show how the relaxed problems are modified, and how the numerical efficiency of solving these problems can be preserved. A number of numerical experiments confirms the improved numerical efficiency.

The reduction subset based on rough sets applied to texture classification

The rough set is a new mathematical approach to imprecision, vagueness and uncertainty. The concept of reduction of the decision table based on the rough sets is very useful for feature selection. The paper describes an application of rough sets method to feature selection and reduction in texture images recognition. The methods applied include continuous data discretization based on Fuzzy c-means and, and rough set method for feature selection and reduction. The trees extractions in the aerial images were applied. The experiments show that the methods presented in this paper are practical and effective.

Identification of an integral plasma membrane pool of protein kinase C in mammalian tissues and cells

Protein kinase C (PKC) is a family of serine/threonine protein kinases that are pivotal in cellular regulation. Since its discovery in 1977, PKCs have been known as cytosolic and peripheral membrane proteins. However, there are reports that PKC can insert into phospholipids vesicles in vitro. Given the intimate relationship between the plasma membrane and the activation of PKC, it is important to determine whether such “membrane-inserted” form of PKC exists in mammalian cells or tissues. Here, we report the identification of an integral plasma membrane pool for all the 10 PKC isozymes in vivo by their ability to partition into the detergent-rich phase in Triton X-114 phase partitioning, and by their resistance to extractions with 0.2 M sodium carbonate (pH 11.5), 2 M urea and 2 M sodium chloride. The endogenous integral membrane pool of PKC in mouse fibroblasts is found to be acutely regulated by phorbol ester or diacylglycerol, suggesting that this pool of PKC may participate in cellular processes known to be regulated by PKC. At least for PKCα, the C2–V3 region at the regulatory domain of the kinase is responsible for membrane integration. Further exploration of the function of this novel integral plasma membrane pool of PKC will not only shed new light on molecular mechanisms underlying its cellular functions but also provide new strategies for pharmaceutical modulation of this important group of kinases.

Extraction of compounds associated with water repellency in sandy soils of different origin

After an initial evaluation of several solvents, the efficiency of Soxhlet extractions with isopropanol/ammonia (s.g. 0.88) (70 : 30 v : v; 24 h) in extracting compounds associated with water repellency in sandy soils was examined using a range of repellent and wettable control soils (n = 15 and 4) from Australia, Greece, Portugal, The Netherlands, and the UK. Extraction efficiency and the role of the extracts in causing soil water repellency was examined by determining extract mass, sample organic carbon content and water repellency (after drying at 20°C and 105°C) pre- and post-extraction, and amounts of aliphatic C–H removed using DRIFT, and by assessing the ability of extracts to cause repellency in acid-washed sand (AWS).

Key findings are: (i) none of organic carbon content, amount of aliphatic C–H, or amount of material extracted give any significant correlation with repellency for this diverse range of soils; (ii) sample drying at 105°C is not necessarily useful before extraction, but may provide additional information on extraction effectiveness when used after extraction; (iii) the extraction removed repellency completely from 13 of the 15 repellent samples; (iv) extracts from all repellent and wettable control soils were capable of inducing repellency in AWS. The findings suggest that compounds responsible for repellency represent only a fraction of the extract composition and that their presence does not necessarily always cause repellency.

Early childhood caries: current evidence for aetiology and prevention

Background: Despite the fact that it is largely preventable, dental caries (decay) remains one of the most common chronic diseases of early childhood. Dental decay in young children frequently leads to pain and infection necessitating hospitalization for dental extractions under general anaesthesia. Dental problems in early childhood have been shown to be predictive of not only future dental problems but also on growth and cognitive development by interfering with comfort nutrition, concentration and school participation. Objective: To review the current evidence base in relation to the aetiology and prevention of dental caries in preschool-aged children. Methods: A search of MEDLINE, CINALH and Cochrane electronic databases was conducted using a search strategy which restricted the search to randomized controlled trials, meta-analyses, clinical trials, systematic reviews and other quasi-experimental designs. The retrieved studies were then limited to articles including children aged 5 years and under and published in English. The evidence of effectiveness was then summarized by the authors. Conclusions: The review highlighted the complex aetiology of early childhood caries (ECC). Contemporary evidence suggests that potentially effective interventions should occur in the first 2 years of a child's life. Dental attendance before the age of 2 years is uncommon; however, contact with other health professionals is high. Primary care providers who have contact with children well before the age of the first dental visit may be well placed to offer anticipatory advice to reduce the incidence of ECC.

Functional morphology of the gastric mills of carnivorous, omnivorous, and herbivorous land crabs

Terrestrial decapods consume a wide variety of plant and animal material. The potential adaptations of carnivorous, omnivorous, and herbivorous terrestrial crustaceans were studied by examining the functional morphology of the gastric mill. Two closely related species from each feeding preference group were examined to identify which features of the mill were due to phylogeny and which were due to adaptation. The morphology of the gastric mill matched the diet well; the gastric mills of the carnivorous species (Geograpsus grayi and Geograpsus crinipes) possessed a blunt, rounded medial tooth and flattened lateral teeth with a longitudinal grinding groove. These features make them well suited to a carnivorous diet of soft animal tissue as well as hard material, such as arthropod exoskeleton. In contrast, the mill of the herbivorous gecarcinids (Gecarcoidea natalis and Discoplax hirtipes) consisted of a medial tooth with sharp transverse ridges and lateral teeth with sharp interlocking cusps and ridges and no grinding surface. These features would efficiently shred fibrous plant material. The morphology of the mill of the omnivorous coenobitids (Coenobita perlatus and Birgus latro) was more generalized toward a mixed diet. However, the mill of B. latro was more adapted to deal with highly nutritious food items, such as nuts and heavily calcified decapods. Its mill possessed lateral teeth with extended ridges, which sat close to the calcified cardiopyloric valve to form a flattened floor. Hard items trapped in the mill would be crushed against this surface by the medial tooth.

Evaluation of fatty acid extraction methods for Thraustochytrium sp. ONC-T18

Various extraction methods were assessed in their capacity to extract fatty acids from a dried biomass of Thraustochytrium sp. ONC-T18. Direct saponification using KOH in ethanol or in hexane:ethanol was one of the most efficient techniques to extract lipids (697 mg g^-1). The highest amount of fatty acids (714 mg g^-1) was extracted using a miniaturized Bligh and Dyer extraction technique. The use of ultrasonics to break down cell walls while extracting with solvents (methanol:chloroform) also offered high extraction yields of fatty acids (609 mg g^-1). Moreover, when the transesterification mixture used for a direct transesterification method was doubled, the extraction of fatty acids increased approximately 77% (from 392 to 696 mg g^-1). This work showed that Thraustochytrium sp. ONC-T18 has the ability to produce over 700 mg g^-1 of lipids, including more than 165 mg g-1 of docosahexaenoic acid, which makes this microorganism a potential candidate for the commercial production of polyunsaturated fatty acids. Finally, other lipids, such as myristic, palmitic, palmitoleic, and oleic acids, were also produced and recovered in significant amounts (54, 196, 123, and 81 mg g^-1), respectively.