Observation of inter- and intramolecular C---H...F hydrogen bonding in Gingras' salt: [n-Bu4N]+[Ph3SnF2]-

The crystal and molecular structure of Gingras' salt [n-Bu₄N]^₊ [Ph₃SnF₂]⁻ is reported, which reveals a variety of inter- and intramolecular C---H...F hydrogen bonding interactions. A ¹¹⁹Sn MAS-NMR spectrum was recorded and a tensor analysis has been performed according to the method of Herzfeld and Berger. The results are discussed in terms of the molecular structure and are compared with the parent compound Ph₃SnF as well as with Mes₃SnF (Mes=mesityl).

Secondary bonding in para-substituted diphenyltellurium dichlorides (p-XC6H4)2TeCl2 (X = H, Me, MeO) probed by 125Te MAS NMR spectroscopy. Crystal and molecular structure of (p-MeC6H4)2TeCl2

The solid-state structures of the previously known para-substituted diphenyltellurium dichlorides, (p-XC₆H₄)₂TeCl₂ (X=H (1), Me (2), MeO (3)) were investigated by ¹²⁵Te MAS NMR spectroscopy and in case of 2 by single crystal X-ray diffraction. The ¹²⁵Te-NMR shielding anisotropy (SA) was studied by tensor analyses based on relative intensities of the observed spinning sidebands. Solid-state NMR parameters, namely the isotropic chemical shift (δ_iso), anisotropy (ζ) and asymmetry (η), were discussed in relation to the molecular structures established by X-ray crystallography. The asymmetry (η) was found to be particularly sensitive to structural differences stemming mostly from the diverse secondary Te...Cl interactions, but no correlation with geometric parameters could be established.

Bonding with cultural brands: exploring the 'binds that tie us'

In contexts such as those in the arts and culture industry, where the use of branded products may be difficult to access due to intermittent availability, or, where the branded product outcomes may be difficult to predict, it is argued that consumers form complex relationships with brands.
In order to explore these complex relationships, this research explores the components of the bond that consumers form with arts and cultural products and brands. This research highlights empirically five components of brand bonding with arts and cultural products, viz., brand trust/affinity, social/self connectedness, loyalty, emotional connectedness and brand involvement. These results found that intricacies emerge, such as consumer optimism about branded product failures, anticipation of usage, and a sense of responsibility for the success of the brand. More importantly, these findings suggest that in situations where service outcomes are uncertain, and where the service is available intermittently, loyal consumers are still willing to develop a relationship based on their connectedness or bond with the brand, despite the situational difficulties associated with accessing it.

Attachment bonding and the receipt of care in the face of chronic illness

The relationship between social support and the mental health outcomes of chronic illness sufferers is regarded as complex with inconsistent findings across studies. More recently, researchers have argued that that these inconsistencies may be explained by attachment theory. In this preliminary study, we explored how attachment bonds with three distinct attachment figures – parents, best friends and romantic partners influenced arthritic young adults’ seeking of care. Forty-one arthritis sufferers aged between 18 and 33 years were administered an online questionnaire which included measures of attachment and the receipt of emotional and instrumental care. Significant differences were found in young adults’ attachment avoidance and anxiety ratings, and seeking of instrumental care across parents, best friends and romantic partners. These differences were associated with differences in the frequency and type of care received by young arthritis sufferers across the three attachment figures. Furthermore, arthritis severity was associated with the receipt of care from attachment figures however this relationship was partially mediated by attachment anxiety.

Synthesis and reactivity of para-substituted benzoylmethyltellurium(II and IV) compounds: observation of intermolecular C-H-O hydrogen bonding in the crystal structure of (p-MeOC6H4COCH2)2TeBr2

Bis(p-substituted benzoylmethyl)tellurium dibromides, (p-YC₆H₄COCH₂)₂TeBr₂, (y=H (1a), Me (1b), MeO (1c)) can be prepared
either by direct insertion of elemental Te across CRf-Br bonds (where C_Rf refers to α-carbon of a functionalized organic moiety) or by the oxidative addition of bromine to (p-YC₆H₄COCH₂)₂Te (y = H (2a), Me (2b), MeO (2c)). Bis(p-substituted benzoylmethyl)tellurium dichlorides, (p-YC₆H₄COCH₂)₂TeCh (y = H (3a), Me (3b), MeO (3c)), are prepared by the reaction of the bis(p-substituted benzoylmethyl)tellurides 2a--c with S0₂Cl₂, whereas the corresponding diiodides (p-YC₆H₄COCH₂)₂Teh (y = H
(4a), Me (4b), MeO (4c)) can be obtained by the metathetical reaction of la--c with KI, or alternatively, by the oxidative addition of
iodine to 2a--c. The reaction of 2a--c with allyl bromide affords the diorganotellurium dibrornides la--c, rather than the expected
triorganotelluronium bromides. Compounds 1-4 were characterized by elemental analyses, IR spectroscopy, ¹H, ^l3C and ¹²⁵Te
NMR spectroscopy (solution and solid-state) and in case of Ie also by X-ray crystallography. (p-MeOC₆H₄COCH₂)₂TeBr₂ (1c) provides, a rare example, among organotellurium compounds, of a supramolecular architecture, where C-H-O hydrogen bonds appear to be the non-covalent intermolecular associative force that dominates the crystal packing.

The utility of hypercoordination and secondary bonding for the synthesis of a binary organoelement oxo cluster

A strategy for the preparation of the otherwise difficult to obtain binary organometallic oxides containing two heavy main group elements is described and exemplified by the synthesis of [(p-MeOC₆H₄)₂Te(OSnt-Bu₂OH)₂]₂.

Observation of Te···π and X···X Bonding in para-Substituted Diphenyltellurium Dihalides, (p-Me2NC6H4)(p-YC6H4)TeX2(X=Cl, Br, I; Y=H, EtO, Me2N)-

The supramolecular association of the previously described para-dimethylaminophenyl-substituted diorganotellurium dihalides (p-Me₂NC₆H₄)₂TeX₂ (X = Cl (1), Br (2), I (3)) and (p-Me₂NC₆H₄)RTeCl₂ (R = Ph (4), p-EtOC₆H₄ (5)), was investigated by X-ray crystallography. Unlike almost all other structurally characterized diorganotellurium dihalides, (p-Me₂NC₆H₄)₂TeX₂ (X = Cl (1), Br (2), I (3)) reveal no secondary Te∙∙∙X interactions, but X∙∙∙X interactions. The structure of (p-Me₂NC₆H₄)PhTeCl₂ (4) resembles that of Ph₂TeCl₂ and shows one secondary Te∙∙∙Cl contact, whereas (p-Me₂NC₆H₄)(p-EtOC₆H₄)TeCl₂ (5) exhibits neither secondary Te∙∙∙Cl nor Cl∙∙∙Cl interactions. The unusual structural characteristics of 1–5 are attributed to the occurrence of intermolecular Te∙∙∙π and π∙∙∙π contacts associated with quinoid π-electron delocalization across the para-dimethylaminophenyl (1–5) and para-ethoxyphenyl (5) groups.

1-Naphthyl- and mesityltellurium(IV,II) derivatives of small bite chelating organic ligands: effect of steric bulk and intramolecular secondary bonding interaction on molecular geometry and supramolecular association

The synthesis and characterization of unsymmetric diorganotellurium compounds containing a sterically demanding I-naphthyl or
mesitylligand and a small bite chelating organic ligand capable of 1,4-Te···N(O) intramolecular interaction is described. The reaction
of ArTeCl₃ (Ar = I-C_lOH₇, Np; 2,4,6-Me₃C₆H_2' Mes) with (SB)HgCI [SB = the Schiff base, 2-(4,4'-N0₂C₆H₄CH=NC₆H₃-Me)] or a methyl ketone (RCOCH₃) afforded the corresponding dichlorides (SB)ArTeCI₂ (Ar = Np, 1Aa; Mes, 1Ba) or (RCOCH₂)ArTeCl₂ (Ar = Np; R = Ph (2Aa), Me (3Aa), Np (4Aa); Ar = Mes, R = Ph (2Ba)). Reduction of 1Aa and 1Ba by Na₂S₂0₅ readily gave the tellurides (SB)ArTe (Ar = Np (1A), Mes, (1B) but that of dichlorides derived from methylketones was complicated due to partial decomposition to tellurium powder and diarylditelluride (Ar₂Te₂), resulting in poor yields of the corresponding tellurides 2A, 2B and 3A. Oxidation of the isolated tellurides with S0₂Cl₂, Br₂ and I₂ yielded the corresponding dihalides. All the synthesized compounds have been characterized with the help of IR, ¹H, ^l3C, and ¹²⁵Te NMR and in the case of 2Aa, and 2Ba by X-ray crystallography. Appearance of only one ¹²⁵Te signal indicated that the unsymmetric derivatives were stable to disproportionation to symmetric species. Intramolecular 1,4-Te· . ·0 secondary bonding interactions (SBIs) are exhibited in the crystal structures of both the tellurium(IV) dichlorides, 2Aa, and 2Ba. Steric repulsion of the mesityl group in the latter dominates over lone pair-bond pair repulsion, resulting in significant widening of the equatorial C-Te-C angle. This appears to be responsible for the lack of Te· . ·CI involved supramolecular associations in the crystal structure of 2Ba.

Melding: a new alternative to adhesive bonding

Melding, a novel method for joining composites is examined in this paper. The method uses Quickstep ™ technology to retain partially cured areas of a composite laminate, enabling subsequent bonding operations. The effect of melding on the mechanical properties of the composite has been investigated. Flexural testing of HexPly 914 indicates consistent properties throughout a melded section. Flexural strength values of 1.36±O.03 GPa compared to 1.35±O.03 GPa for a standard laminate were recorded. In order to achieve sufficient bond strength, the portion of the composite to be joined must have a significant proportion of uncured matrix. The ability of Hexply 914 prepreg to retain sufficient bonding potential to form a strong joint was also investigated. HexPly 914 Lap Shear results indicated no significant variation in strength values between co-cured and melded joins, with a recorded
strength value of 15.0±0. 7 MPa.

Selective hydrogen bonding and hierarchical nanostructures in poly(hydroxyether of bisphenol A)/poly(ε-caprolactone)-block-poly(2-vinyl pyridine) blends

The phase behavior, hydrogen bonding interactions and morphology of poly(hydroxyether of bisphenol A) (phenoxy) and poly(var epsilon-caprolactone)-block-poly(2-vinyl pyridine) (PCL-b-P2VP) were investigated using differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, optical microscopy and atomic force microscopy (AFM). In this A-b-B/C type block copolymer/homopolymer system, both P2VP and PCL blocks have favorable intermolecular interaction towards phenoxy via hydrogen bonding. However, the hydrogen bonding between P2VP and phenoxy is significantly stronger than that between PCL and phenoxy. Selective hydrogen bonding between phenoxy/P2VP pair at lower phenoxy contents and co-existence of two competitive hydrogen bonding interactions between phenoxy/P2VP and phenoxy/PCL pairs at higher phenoxy contents were observed in the blends. This leads to the formation of a variety of composition dependent nanostructures including wormlike, hierarchical and core–shell morphologies. The blends became homogeneous at 95 wt% phenoxy where both blocks of the PCL-b-P2VP were miscible with phenoxy due to hydrogen bonding. In the end, a model was proposed to explain the microphase morphology of blends based on the experimental results obtained. The swelling of the PCL-b-P2VP block copolymer by phenoxy due to selective hydrogen bonding causes formation of different microphases

Self-assembled complexes of poly(4-vinylphenol) and poly(ε-caprolactone)-block-poly(2-vinylpyridine) via competitive hydrogen bonding

Nanostructured complexes were prepared from poly(ε-caprolactone)-block-poly(2-vinylpyridine) (PCL-b-P2VP) and poly(4-vinylphenol) (PVPh) in tetrahydrofuran (THF). The phase behavior, specific interactions, and morphology were investigated using differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, optical microscopy, atomic force microscopy (AFM), transmission electron microscopy (TEM), and small-angle X-ray scattering (SAXS). In this A-b-B/C type block copolymer/homopolymer system, both blocks of the PCL-b-P2VP block copolymer have favorable intermolecular interaction toward PVPh via hydrogen bonding, but the interaction between P2VP block and PVPh is significantly stronger than that between PCL block and PVPh. It was found that the disparity in competitive intermolecular interactions, specifically PVPh and P2VP block interact strongly whereas PVPh and PCL block interact weakly, leads to the formation of a variety of nanostructures depending on PVPh concentration. Spherical micelles of 30−40 nm in diameter were obtained in the complex with 10 wt % PVPh, followed by wormlike micelles with size in the order of 40−50 nm in the complexes with 30−60 wt % PVPh. At low PVPh concentrations, PCL interacts weakly with PVPh, whereas in the complexes containing more than 20 wt % PVPh, the PCL block began to interact considerably with PVPh, leading to the formation of composition-dependent nanostructures. The complex becomes homogeneous with PVPh content beyond 60 wt %, since a sufficient amount of PVPh is available to form hydrogen bonds with both PCL and P2VP. Finally, a model was proposed to explain the self-assembly and microphase morphology of these complexes based on the experimental results obtained. The competitive hydrogen-bonding interactions cause the self-assembly and formation of different microphase morphologies.

Nanostructure and hydrogen bonding in interpolyelectrolyte complexes of poly(ε-caprolactone)-block-poly(2-vinyl pyridine) and poly(acrylic acid)

Nanostructured poly(ε-caprolactone)-block-poly(2-vinyl pyridine) (PCL-b-P2VP)/poly(acrylic acid) (PAA) interpolyelectrolyte complexes (IPECs) were prepared by casting from THF/ethanol solution. The morphological behaviour of this amphiphilic block copolymer/polyelectrolyte complexes with respect to the composition was investigated in a solvent mixture. The phase behaviour, specific interactions and morphology were investigated using differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, optical microscopy (OM), dynamic light scattering (DLS) and atomic force microscopy (AFM). Micelle formation occurred due to the aggregation of hydrogen bonded P2VP block and polyelectrolyte (PAA) from non-interacted PCL blocks. It was observed that the hydrodynamic diameter (D_h) of the micelles in solution decreased with increasing PAA content up to 40 wt%. After 50 wt% PAA content, D_h again increased. The micelle formation in PCL-b-P2VP/PAA IPECs was due to the strong intermolecular hydrogen bonding between PAA homopolymer units and P2VP blocks of the block copolymer. The penetration of PAA homopolymers into the shell of the PCL-b-P2VP block copolymer micelles resulted in the folding of the P2VP chains, which in turn reduced the hydrodynamic size of the micelles. After the saturation of the shell with PAA homopolymers, the size of the micelles increased due to the absorption of added PAA onto the surface of the micelles.

Acylmethyl(aryl)tellurium(IV,II) derivatives : intramolecular secondary bonding and steric rigidity

Electrophilic substitution of acylmethanes (methyl ketones), RCOCH3 (R = i-Pr, 1; Et, 2; Me, 3) with aryltellurium trichlorides, ArTeCl3 (Ar = 1-C10H7, Np, A; 2,4,6-Me3C6H2, Mes, B; 4-MeOC6H4, Anisyl, C) under mild conditions affords the corresponding acylmethyl(aryl)tellurium dichlorides (RCOCH2)ArTeCl2. Reduction of the dichlorides, gives tellurides, (i-PrCOCH2)ArTe, 1A–1C, which give the corresponding dihalides, (i-PrCOCH2)ArTeX2 (X = Cl, 1Aa–1Ca; Br, 1Ab–1Cb; I, 1Ac–1Cc) when reacted in situ with SO2Cl2, Br2 or I2. The unsymmetric tellurides are labile towards disproportionation and attempts to obtain them lead to the isolation of Ar2Te2 except in the case of (i-PrCOCH2)MesTe ( 1B), which represents an interesting example of a kinetically stable aryl(alkyl)telluride. All the dihalomesityltellurium(IV) derivatives show separate 1H and 13C NMR signals for the ortho methyls irrespective of the sizes of R and X ligands. The telluride, 1B with free rotation about Te–C(mesityl) bond shows, like the unsymmetric diorganotellurium(IV) dihalides, only one 125Te NMR signal. The 1,4-chelating behavior of the acyl ligand among diorganotellurium(IV) compounds is inferred from the X-ray diffraction data for 1Aa, 1Ac, 1Ba, 1Bb, 1Ca and 1Cc which are indicative of the presence of intramolecular TeO secondary bonding interactions (SBIs) at least in the solid state. As a consequence, steric repulsion in case of the mesityltellurium(IV) derivatives, 1Ba and 1Bb, reaches the threshold so as to cause loss of two-fold rotational symmetry of the mesityl group about the Te–C(mesityl) bond axis. Intermolecular C–HO H-bonding interactions appears to stabilize such an orientation of the aryl ligand at least in the solid state.

The reactivity of diorganotellurium oxides towards phenol and o-nitrophenol. Hypervalent and secondary bonding of four different product classes

The reaction of the diorganotellurium oxides R2TeO (R = Ph, p-MeOC6H4, p-Me2NC6H4) with phenol and o-nitrophenol produces diorganotellurium hydroxy phenolates, R2Te(OH)OPh (1, R = Ph; 2, R = p-MeOC6H4; 3, R = p-Me2NC6H4), diorganotellurium bis(phenolates) R2Te(OPh)2 (4, R = Ph; 5, R = p-MeOC6H4; 6, R = p-Me2NC6H4), tetraorganoditelluroxane bis(o-nitrophenolates), (R′O)R2TeOTeR2(OR′) (7, R = p-MeOC6H4; 8, R = p-Me2NC6H4; R′ = o-NO2C6H4), and a hexaphenyltritelluroxane bis(o-nitrophenolate) (R′O)Ph2TeOTePh2OTePh2(OR′) (9, R′ = o-NO2C6H4), respectively. The redistribution reactions of R2Te(OPh)2 (4, R = Ph; 5, R = p-MeOC6H4; 6, R = p-Me2NC6H4) with the corresponding diorganotellurium oxides R2TeO and diorganotellurium dichlorides R2TeCl2 (R = Ph, p-MeOC6H4, p-Me2NC6H4) give rise to the formation of moisture sensitive tetraorganoditelluroxane bis(phenolates) (PhO)R2TeOTeR2(OPh) (10, R = Ph; 11, R = p-MeOC6H4; 12, R = p-Me2NC6H4) and diorganotellurium chloro phenolates, R2Te(Cl)OPh (13, R = Ph; 14, R = p-MeOC6H4; 15, R = p-Me2NC6H4), respectively. The reaction of the diorganotellurium oxides R2TeO with the corresponding diorganotellurium dichlorides R2TeCl2 (R = Ph, p-MeOC6H4, p-Me2NC6H4) affords tetraorganoditelluroxane dichlorides ClR2TeOTeR2Cl (16, R = Ph; 17, R = p-MeOC6H4; 18, R = p-Me2NC6H4) as air-stable solid materials. The reactivity of 1–18 can be rationalized by the kinetic lability of the Te–O and Te–Cl bonds. Compounds 1–18 have been characterized by solution and solid-state 125Te NMR spectroscopy and 2, 4, 6, 7, 9, 17, and 18 have also been analyzed by X-ray crystallography.