SI cube helps students learn SI units and volume

A 10 cm x10 cm x 10 cm "SI cube", which helps students learn SI units, is presented. Students cn physically handle and manipulate the SI cube, which also helps them to have a better appreciation of volume. A template for making the cube is available as supplementary material.

The allometric relationship between mean fibre diameter of mohair and the fleece-free liveweight of Angora goats over their lifetime

As mean fibre diameter (MFD) is the primary determinant of mohair price we aimed to quantify the lifetime changes in mohair MFDas Angora goats aged and grew. Measurements were made over 12 shearing periods on a population of Angora goats representing the current range and diversity of genetic origins including South African, Texan and interbred admixtures of these and Australian sources. Records of sire, dam, birthweight, birth parity, liveweight, fleece growth and fleece quality were taken for does and castrated males (wethers) (n = 267 animals). Fleece-free liveweights (FFL_wt) were determined for each goat at shearing time by subtracting the greasy fleece weight from the liveweight recorded immediately before shearing. A restricted maximum likelihood growth curve model was developed for relating MFD to FFL_wt, age and other measurements.Asimple way of describing the results is:MFD= k (FFL_wt)b E; where k is a parameter that can vary in a systematic way with shearing(age), breed, weaning weight, sire, dam and individual; b is a parameter that is the same for nearly the whole study; and E are independent errors from a log-normal distribution. The analysis shows that ^b = 0.34, with s.e. (^b) = 0.021. Thus, mohair MFD was allometrically related to the cube root of FFLwt over the lifetime of Angora goats. However, the allometric proportionality constant differed in a systematic way with age at shearing, genetic strain, weaning weight, sire, dam and individual. For Texan-breed goats, MFD decreased as weaning weight increased (P = 0.00016). The findings indicate that management factors that affect liveweight and weaning weight have lifetime effects on mohair fibre diameter and therefore the value of mohair and the profitability of the mohair enterprise.

Effect of orientation stability on recrystallization textures of deformed aluminium single crystals

High purity Al single crystals of the Cube (0 0 1)[1 0 0] and rotated Cube (0 1 1)[0 1 ¯ 1] orientations have been deformed in plane strain compression in a channel die. Deformation was carried out at temperatures between 25 and 600 8C up to strains of 1.2. The as-deformed microstructure has been characterised using electron microscopy and electron backscattered diffraction (EBSD).
Annealing was carried out for various times and temperatures. The recrystallized microstructure has been studied using electron microscopy, and the orientation of recrystallized grains determined using EBSD. After cold deformation and annealing both orientations exhibited a random recrystallization texture component. After hot deformation both orientations retained a similar annealing texture to their starting deformation texture. The annealing texture of deformed single crystals was found to be more sensitive to the temperature of deformation than the stability of the orientation.

Accounting for uncertainty in volumes of seabed change measured with repeat multibeam sonar surveys

Seafloors of unconsolidated sediment are highly dynamic features; eroding or accumulating under the action of tides, waves and currents. Assessing which areas of the seafloor experienced change and measuring the corresponding volumes involved provide insights into these important active sedimentation processes. Computing the difference between Digital Elevation Models (DEMs) obtained from repeat Multibeam Echosounders (MBES) surveys has become a common technique to identify these areas, but the uncertainty in these datasets considerably affects the estimation of the volumes displaced. The two main techniques used to take into account uncertainty in volume estimations are the limitation of calculations to areas experiencing a change in depth beyond a chosen threshold, and the computation of volumetric confidence intervals. However, these techniques are still in their infancy and, as a result, are often crude, seldom used or poorly understood. In this article, we explored a number of possible methodological advances to address this issue, including: (1) using the uncertainty information provided by the MBES data processing algorithm CUBE, (2) adapting fluvial geomorphology techniques for volume calculations using spatially variable thresholds and (3) volumetric histograms. The nearshore seabed off Warrnambool harbour - located in the highly energetic southwest Victorian coast, Australia - was used as a test site. Four consecutive MBES surveys were carried out over a four-months period. The difference between consecutive DEMs revealed an area near the beach experiencing large sediment transfers - mostly erosion - and an area of reef experiencing increasing deposition from the advance of a nearby sediment sheet. The volumes of sediment displaced in these two areas were calculated using the techniques described above, both traditionally and using the suggested improvements. We compared the results and discussed the applicability of the new methodological improvements. We found that the spatially variable uncertainty derived from the CUBE algorithm provided the best results (i.e. smaller confidence intervals), but that similar results can be obtained using as a fixed uncertainty value derived from a reference area under a number of operational conditions.

Coarser wool is not a necessary consequence of sheep aging: allometric relationship between fibre diameter and fleece-free liveweight of Saxon Merino sheep

The mean fibre diameter (MFD) of wool is the primary determinant of price, processing performance and textile quality. This study determines the primary influences on MFD as Saxon Merino sheep age, by allometrically relating MFD to fleece-free liveweight (FFLwt). In total, 79 sheep were grazed in combinations of three stocking rates and two grazing systems (GS: sheep only; mixed with Angora goats) and studied over 3 years. Measurements were made over 14 consecutive periods (Segments), including segments of FFLwt gain or FFLwt loss. Using shearing and liveweight records and dye-bands on wool, the FFLwt and average daily gain (ADG) of each sheep were determined for each segment. The mean and range in key measurements were as follows: FFLwt, 40.1 (23.1 to 64.1) kg; MFD, 18.8 (12.7 to 25.8) μm. A random coefficient restricted maximum likelihood (REML) regression mixed model was developed to relate the logarithm of MFD to the logarithm of FFLwt and other effects. The model can be written in the form of ${\rm MFD}\,{\equals}\,\rkappa \left( {{\rm GS,}\,{\rm A}{\rm ,}\,{\rm Segment}{\rm .Plot,}\,{\rm Segment,}\,{\rm ADG}} \right){\times}{\rm FFLwt}^{{\left( {\ralpha \left( {{\rm GS}} \right){\plus}\rbeta \left(\rm A \right){\plus}\rgamma \left( {{\rm Segment}{\rm .Plot}} \right)} \right)}} $ , where $\ralpha \left( {{\rm GS}} \right)\,{\equals}\,\;\left\{ {\matrix{\!\! {0.32\left( {{\rm SE}\,{\equals}\,{\rm 0}{\rm .038}} \right)\,{\rm when}\,{\rm sheep}\,{\rm are}\,{\rm grazed}\,{\rm alone}} \hfill \cr \!\!\!\!{0.49\left( {{\rm SE}\,{\equals}\,{\rm 0}{\rm .049}} \right)\,{\rm when}\,{\rm sheep}\,{\rm are}\,{\rm mixed}\,{\rm with}\,{\rm goats}} \hfill \cr } } \right.$ β(A) is a random animal effect, γ(Segment.Plot) a random effect associated with Segment.plot combinations, and κ a constant that depends on GS, random animal effects, random Segment.plot combination effects, Segment and ADG. Thus, MFD was allometrically related to the cube root of FFLwt over seasons and years for sheep, but to the square root of FFLwt for sheep grazed with goats. The result for sheep grazed alone accords with a primary response being that the allocation of nutrients towards the cross-sectional growth of wool follicles is proportional to the changes in the skin surface area arising from changes in the size of the sheep. The proportionality constant varied systematically with ADG, and in sheep only grazing, was about 5 when sheep lost 100 g/day and about 6 when sheep gained 100 g/day. The proportionality constant did not systematically change with chronological age. The variation in the allometric coefficient between individual sheep indicates that some sheep were more sensitive to changes in FFLwt than other sheep. Key practical implications include the following: (a) the reporting of systematic increases in MFD with age is likely to be a consequence of allowing sheep to increase in size during shearing intervals as they age; (b) comparisons of MFD between sheep are more likely to have a biological basis when standardised to a common FFLwt and not just to a common age;

Why is the tetrahedral bond angle 109°? The tetrahedron-in-a-cube

The common question of why the tetrahedral angle is 109.471° can be answered using a tetrahedron-in-a-cube, along with some Year 10 level mathematics. The tetrahedron-in-a-cube can also be used to demonstrate the non-polarity of tetrahedral molecules, the relationship between different types of lattice structures, and to demonstrate that inductive reasoning does not always provide the correct answer.

Memory, photography, and the politics of abuse : the ambiguous nature of photography

Critical commentary on Australian artist Bill Henson’s work including the series Untitled 1994-1995 which represented Australia at the Venice Biennale is frequently framed within the discourse of the ‘white cube’. Its contextualisation in predominantly art historical and formalist perspectives tends to operate as a mechanism that denies affective and embodied dimensions of meaning making. Much the same could be said of the work of Marian Drew who uses road kill in her photographic still life works. However, the ‘distancing’ in these works is also achieved through historical allusion, which at the same time reactivates the fl ow of emotional empathy and desire. In this paper, I ask the question: “What distinguishes the work of these two artists with media images of torture?”

My attempt to address this question will involve a narrative re-reading of selected works of Henson and Drew incorporating notions of affect, identification, memory and desire as processes which operate non-discursively, but which are inseparable from memory and lived experiences. This will permit a double exposure of the work of these artists. Within a psychoanalytical context, my re-reading will be used to extend an understanding of the now familiar press and Internet images of the torture of Iraqi prisoners.

As a metaphor for desire and ideology, photography operates within manifest and latent registers. I will argue that certain forms of photographic practice may be understood in terms of a politics of abuse — instantiating an uneven differentiation of power between actants, the winning (forcefully or otherwise) of consent or complicity, the silencing of refusal of resistance and/or the incriminating of the ‘victim’ — whilst at the same time upholding the claim of verisimilitude and aesthetic or ethical intent. Critical engagement with such practices is crucial to an understanding of the relationship between institutional discourses, trauma and abuse in contemporary society.

EBSD study of the orientation dependence of substructure characteristics in a model Fe-30wt%Ni alloy subjected to hot deformation

The aim of the present investigation was to determine the orientation dependence of substructure characteristics in an austenitic Fe−30wt%Ni model alloy subjected to hot plane strain compression. Deformation was carried out at a temperature of 950 °C using a strain rate of 10 s^₋₁ to equivalent strain levels of approximately 0.2, 0.4, 0.6 and 0.8. The specimens obtained were analysed using a fully automatic electron backscatter diffraction technique. The crystallographic texture was characterized for all the strain levels studied and the subgrain structure was quantified in detail at a strain of 0.4. The substructure characteristics displayed pronounced orientation dependence. The major texture components, namely the copper, S, brass, Goss and rotated Goss, generally contained one or two prominent families of parallel larger-angle extended subboundaries, the traces of which on the longitudinal viewing plane appeared systematically aligned along the {111} slip plane traces, bounding long microbands subdivided into slightly elongated subgrains by short lower-angle transverse subboundaries. Relatively rare cube-orientated grains displayed pronounced subdivision into coarse deformation bands containing large, low-misorientated subgrains. The misorientation vectors across subboundaries largely showed a tendency to cluster around the sample transverse direction. Apart from the rotated Goss texture component, the stored energy levels for the remaining components were principally consistent with the corresponding Taylor factor values.

Evolution of strain-induced precipitates in a model austenitic Fe-30Ni-Nb steel and their effect on the flow behaviour

The present work investigated the evolution of strain-induced NbC precipitates in a model austenitic Fe-30Ni-Nb steel deformed at 925 °C to a strain of 0.2 during post-deformation holding between 3 and 1000 s and their effect on the reloading flow stress. The precipitate particles preferentially nucleated on the nodes of the periodic dislocation networks constituting microband walls. Holding for 10 s resulted in the formation of fine, largely coherent NbC particles with a mean diameter of ∼5 nm, which displayed a cube-on-cube orientation relationship with austenite and caused the maximum increase in the reloading steady-state flow stress. A further increase in the holding time from 30 to 1000 s led to the formation of semi-coherent, gradually coarser and more widely spaced particles with a mean diameter of 8 nm and above, which led to a gradual decrease in the reloading steady-state flow stress. The holding time increase resulted in progressive disintegration of the dislocation substructure and dislocation annihilation through static recovery processes, which was also reflected by the measured softening fractions. The precipitate particle shape changed during post-deformation annealing from elliptical to faceted octahedral and subsequently to tetra-kai-decahedral. © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.