Effects of increasing neuromuscular electrical stimulation current intensity on cortical sensorimotor network activation: a time domain fNIRS study

Neuroimaging studies have shown neuromuscular electrical stimulation (NMES)-evoked movements activate regions of the cortical sensorimotor network, including the primary sensorimotor cortex (SMC), premotor cortex (PMC), supplementary motor area (SMA), and secondary somatosensory area (S2), as well as regions of the prefrontal cortex (PFC) known to be involved in pain processing. The aim of this study, on nine healthy subjects, was to compare the cortical network activation profile and pain ratings during NMES of the right forearm wrist extensor muscles at increasing current intensities up to and slightly over the individual maximal tolerated intensity (MTI), and with reference to voluntary (VOL) wrist extension movements. By exploiting the capability of the multi-channel time domain functional near-infrared spectroscopy technique to relate depth information to the photon time-of-flight, the cortical and superficial oxygenated (O2Hb) and deoxygenated (HHb) hemoglobin concentrations were estimated. The O2Hb and HHb maps obtained using the General Linear Model (NIRS-SPM) analysis method, showed that the VOL and NMES-evoked movements significantly increased activation (i.e., increase in O2Hb and corresponding decrease in HHb) in the cortical layer of the contralateral sensorimotor network (SMC, PMC/SMA, and S2). However, the level and area of contralateral sensorimotor network (including PFC) activation was significantly greater for NMES than VOL. Furthermore, there was greater bilateral sensorimotor network activation with the high NMES current intensities which corresponded with increased pain ratings. In conclusion, our findings suggest that greater bilateral sensorimotor network activation profile with high NMES current intensities could be in part attributable to increased attentional/pain processing and to increased bilateral sensorimotor integration in these cortical regions.

Damage identification of civil infrastructure in the time domain using FEM calibrated ARMAX model

Due to environmental loads, mechanical damages, structural aging and human factors, civil infrastructure inevitably deteriorate during their service lives. Since their damage may claim human lives and cause significant economic losses, how to identify damages and assess structural conditions timely and accurately has drawn increasingly more attentions from structural engineering community worldwide. In this study, a fast and sensitive time domain damage identification method will be developed. First, a high quality finite element model is built and the structural responses are simulated under different damage scenarios. Based on the simulated data, an Auto Regressive Moving Average Exogenous (ARMAX) model is then developed and calibrated. The calibrated ARMAX model can be used to identify damage in different scenarios through model updating process using clonal selection algorithm (CSA). The identification results demonstrate the performance of the proposed methodology, which has the potential to be used for damage identification in practices.

FEM calibrated ARMAX model updating method for time domain damage identification

Due to environmental loads, mechanical damages, structural aging and human factors, civil infrastructure inevitably deteriorate during their service lives. Since their damage may claim human lives and cause significant economic losses, how to identify damages and assess structural conditions timely and accurately has drawn increasingly more attentions from structural engineering community worldwide. In this study, a fast and sensitive time domain damage identification method will be developed. To do this, a finite element model of a steel pipe laid on the soil is built and the structural responses are simulated under different damage scenarios. Based on the simulated data, an Auto Regressive Moving Average Exogenous (ARMAX) model is then built and calibrated. The calibrated ARMAX model is used to identify different damage scenarios through model updating process using clonal selection algorithm (CSA). The results demonstrate the application potential of the proposed method in identifying the pipeline conditions. To further verify its performance, laboratory tests of a steel pipe laid on the soil with and without soil support (free span damage) are carried out. The identification results of pipe-soil system show that the proposed method is capable of identifying damagein a complex structural system. Therefore, it can be applied to identifying pipeline conditions.

A stochastic time-domain model for burst data aggregation in IEEE 802.15.4 wireless sensor networks

In many network applications, the nature of traffic is of burst type. Often, the transient response of network to such traffics is the result of a series of interdependant events whose occurrence prediction is not a trivial task. The previous efforts in IEEE 802.15.4 networks often followed top-down approaches to model those sequences of events, i.e., through making top-view models of the whole network, they tried to track the transient response of network to burst packet arrivals. The problem with such approaches was that they were unable to give station-level views of network response and were usually complex. In this paper, we propose a non-stationary analytical model for the IEEE 802.15.4 slotted CSMA/CA medium access control (MAC) protocol under burst traffic arrival assumption and without the optional acknowledgements. We develop a station-level stochastic time-domain method from which the network-level metrics are extracted. Our bottom-up approach makes finding station-level details such as delay, collision and failure distributions possible. Moreover, network-level metrics like the average packet loss or transmission success rate can be extracted from the model. Compared to the previous models, our model is proven to be of lower memory and computational complexity order and also supports contention window sizes of greater than one. We have carried out extensive and comparative simulations to show the high accuracy of our model.

A novel technique to investigate the effect of ageing on ventricular repolarization characteristics in healthy and LQTS subjects

Ventricular repolarization(VR) characteristics is affected by ageing alongside several other factors like Heart rate(HR),respiration, modulation of autonomic nervous system, different drug effects, genetical factors affecting the cardiac ion channel characteristics, gender etc. Therefore, total VR variability (i.e. QT interval variability in surface ECG) consists of two components: one dependent on HR variability (HRV) and another independent of HRV. Analysis of QT interval variability (QTV) is crucial for both healthy and pathological conditions as increase in VR variability measured by QTV increases cardiac repolarization instability, which might lead to arrhythmogenesis. Analyzing the effect of ageing using a widely used measure of QTV (i.e. QTVI) is reported inconsistently in Healthy subjects whereas the same for Long QT Syndrome (LQTS) subjects is not widely reported. In this study, we propose a novel time domain measure from beat-tobeat QT-RR distribution to analyze how ageing affects VR in both Healthy and a group of genotyped LQTS1 subjects. A total of 139 Healthy subjects and 134 LQTS1 subjects of three different age groups (i.e. Young: age 20-35, Middle-aged: 40-55 and Old: age<;60) were analyzed for this study. The proposed measure is also compared with other existing widely used measures of QTV like SDQT and QTVI in differentiating different age groups. The proposed measure stands out to be more discriminatory than other existing variability measures of QT interval.

A novel technique for analysing beat-to-beat dynamical changes of QT-RR distribution for arrhythmia prediction

Ventricular tachycardia (VT) leading to ventricular fibrillation (VF) is the major cause of sudden cardiac death (SCD) with subjects with or without any history of cardiac disease. Prediction of the initiation of ventricular fibrillation is crucial for both successful preventive measure and effective defibrillation therapy. A lot of studies have been done based on electrocardiogram (ECG) waveform analysis for VF detection but this field still needs more perfection. Both HRV and QTV related parameters were reported to be analysed for VT/VF detection and prediction with inconsistent results in different populations. In this study, we propose a novel time domain measurement tool to detect the pattern of dynamical changes of both RR and QT intervals in subjects having sustained VT/VF episodes form VFDB and AHA database (www.physionet.org). We also analyse the same pattern in some healthy subjects from Fantasia database and compare the distribution of patterns between healthy and VT/VF subjects. Our findings showed that the distribution of QT-RR dynamics are statistically significantly different (p<0.05) in healthy subjects from VT/VF in particular before the start of VF episode. Therefore, distribution of change in QT-RR dynamics may provide insight of the underlying instability before VF events and can be used for better prediction of arhythmogenesis.

Development of a new versatile computer controlled electrochemical/ESR data acquisition system

A new versatile computer controlled electrochemlcal/ESR data acquisition system has been developed for the Investigation of short-lived radicals with life-times of 20 milliseconds and greater, Different computer programs have been developed to monitor the decay of radicals; over hours or minutes, seconds or milliseconds. Signal averaging and Fourier smoothing is employed in order to improve the signal to noise ratio. Two microcomputers are used to control the system, one home-made computer containing the M6800 chip which controls the magnetic field, and an IBM PC XT which controls the electrochemistry and the data acquisition. The computer programs are written in Fortran and C, and call machine language subroutines, The system functions by having the radical generated by an electrochemical pulse: after or during the pulse the ESR data are collected. Decaying radicals which have half-lives of seconds or greater have their spectra collected in the magnetic field domain, which can be swept as fast as 200 Gauss per second. The decay of the radicals in the millisecond region is monitored by time-resolved ESR: a technique in which data is collected in both the time domain and in the magnetic field domain. Previously, time-resolved ESR has been used (without field modulation) to investigate ultra-short-lived species with life-times in the region of only a few microseconds. The application of the data acquisition system to chemical systems is illustrated. This is the first time a computer controlled system whereby the radical is generated by electrochemical means and subsequently the ESR data collected, has been developed.

Damage identification scheme based on compressive sensing

Civil infrastructures are critical to every nation, due to their substantial investment, long service period, and enormous negative impacts after failure. However, they inevitably deteriorate during their service lives. Therefore, methods capable of assessing conditions and identifying damage in a structure timely and accurately have drawn increasing attention. Recently, compressive sensing (CS), a significant breakthrough in signal processing, has been proposed to capture and represent compressible signals at a rate significantly below the traditional Nyquist rate. Due to its sound theoretical background and notable influence, this methodology has been successfully applied in many research areas. In order to explore its application in structural damage identification, a new CS-based damage identification scheme is proposed in this paper, by regarding damage identification problems as pattern classification problems. The time domain structural responses are transferred to the frequency domain as sparse representation, and then the numerical simulated data under various damage scenarios will be used to train a feature matrix as input information. This matrix can be used for damage identification through an optimization process. This will be one of the first few applications of this advanced technique to structural engineering areas. In order to demonstrate its effectiveness, numerical simulation results on a complex pipe soil interaction model are used to train the parameters and then to identify the simulated pipe degradation damage and free-spanning damage. To further demonstrate the method, vibration tests of a steel pipe laid on the ground are carried out. The measured acceleration time histories are used for damage identification. Both numerical and experimental verification results confirm that the proposed damage identification scheme will be a promising tool for structural health monitoring.

Gait termination : a review of experimental methods and the effects of aging and gait pathologies

The study of human gait has expanded and diversified to the extent that it is now possible to identify a substantive literature concerning a variety of gait tasks, such as gait initiation [Halliday SE, Winter DA, Frank JS, Patla AE, Prince F. The initiation of gait in young, elderly, and Parkinson's disease subjects. Gait Posture 1998;8:8–14; Mickelborough J, van der Linden ML, Tallis RC, Ennos AR. Muscle activity during gait initiation in normal elderly people. Gait Posture 2004;19:50–57], stepping over and across obstacles [Patla AE, Prentice SD, Robinson C, Newfold J. Visual control of locomotion: strategies for changing direction and for going over obstacles. J Exp Psych 1991;17:603–34; Chen, HC, Ashton-Miller JA, Alexander NB, Schultz AB. Effect of age and available response time on ability to step over an obstacle. J Gerontol 1994;49:227–33; Sparrow WA, Shinkfield AJ, Chow S, Begg RK. Gait characteristics in stepping over obstacles. Hum Mov Sci 1996;15:605–22; Begg RK, Sparrow WA, Lythgo ND. Time-domain analysis of foot–ground reaction forces in negotiating obstacles. Gait Posture 1998;7:99–109; Patla AE, Rietdyk S. Visual control of limb trajectory over obstacles during locomotion: effect of obstacle height and width. Gait Posture 1993;1:45–60] negotiating raised surfaces such as curbs and stairs [Begg RK, Sparrow WA. Gait characteristics of young and older individuals negotiating a raised surface: implications for the prevention of falls. J Gerontol Med Sci 2000;55A:147–54; Mcfayden BJ, Winter DA. An integrated biomechanical analysis of normal stair ascent and descent. J Biomech 1988;21:733–44]. In addition, increasing research interest in age-related declines in gait that might predispose individuals to falls has engendered a very extensive literature concerning ageing effects on gait. While rapid locomotor adjustments are common in the course of daily activities there has been no previous review of the findings concerning gait adaptations when walking is terminated both rapidly and unexpectedly. The aims of this review were first, to summarise the key research findings and methodological considerations from studies of termination. The second aim was to demonstrate the effects of ageing and gait pathologies on termination with respect to the regulation of step characteristics, lower-limb muscle activation patterns and foot–ground reaction forces.

Acoustic emission study on corona discharge using FDTD model

This paper attempts to study the propagating characteristics of acoustic signals emitted from the breakdown of air using time domain numerical model. Acoustic emissions are produced by high voltage faults such as partial discharge and surface discharge. Study of such emissions has become popular among researchers because of the promising correlation between partial and surface discharges and its byproduct, acoustic signal emission. In this paper, propagation characteristics of acoustic signals are studied using finite difference time domain (FDTD) method. Multiple monitoring points are placed within a designated computation space at different distance away from a source.

Spectral element modelling of wave propagation with boundary and structural discontinuity reflections

Spectral element method is very efficient in modelling high-frequency stress wave propagation because it works in the frequency domain. It does not need to use very fine meshes in order to capture high frequency wave energy as the time domain methods do, such as finite element method. However, the conventional spectral element method requires a throw-off element to be added to the structural boundaries to act as a conduit for energy to transmit out of the system. This makes the method difficult to model wave reflection at boundaries. To overcome this limitation, imaginary spectral elements are proposed in this study, which are combined with the real structural elements to model wave reflections at structural boundaries. The efficiency and accuracy of this proposed approach is verified by comparing the numerical simulation results with measured results of one dimensional stress wave propagation in a steel bar. The method is also applied to model wave propagation in a steel bar with not only boundary reflection, but also reflections from single and multiple cracks. The reflection and transmission coefficients, which are obtained from the discrete spring model, are adopted to quantify the discontinuities. Experimental tests of wave propagation in a steel bar with one crack of different depths are also carried out. Numerical simulations and experimental results show that the proposed method is effective and reliable in modelling wave propagation in one-dimensional waveguides with reflections from boundary and structural discontinuities. The proposed method can be applied to effectively model stress wave propagation for structural damage detection.

Parametric investigation and measurement of near end and far end crosstalk in multiconductor microstrip transmission lines

This paper investigates and measures the near end and far end crosstalk in the multiconductor transmission line (MTL) mounted on the PCB by varying the parameters which are associated with physical dimension, characteristic of the substrate and the nature of input signal. With the variation of these factors, the coupling inductance and capacitance vary causing crosstalk. By using the method of moment (MoM), the per unit length parameters are calculated for microstrip lines. Subcircuit model is used to investigate the time domain and frequency domain analysis of near field and far field crosstalk. This parametric investigation is very useful for designing high speed interconnectors on PCB substrates. Some experimental results are presented to validate the analytical findings.

Design and analysis of an antenna for wireless energy harvesting in head-mountable DBS device

This paper presents design and simulation of a circular meander dipole antenna at the industrial, scientific, and medical band of 915 MHz for energy scavenging in a passive head-mountable deep brain stimulation device. The interaction of the proposed antenna with a rat body is modeled and discussed. In the antenna, the radiating layer is meandered, and a FR-4 substrate is used to limit the radius and height of the antenna to 14 mm and 1.60 mm, respectively. The resonance frequency of the designed antenna is 915 MHz and the bandwidth of 15 MHz at a return loss of -10 dB in free space. To model the interaction of the antenna with a rat body, two aspects including functional and biological are considered. The functional aspect includes input impedance, resonance frequency, gain pattern, radiation efficiency of the antenna, and the biological aspect involves electric field distribution, and SAR value. A complete rat model is used in the finite difference time domain based EM simulation software XFdtd. The simulated results demonstrate that the specific absorption rate distributions occur within the skull in the rat model, and their values are higher than the standard regulated values for the antenna receiving power of 1W.