Weaning of Australian shortfin glass eels (Anguilla Australis): a comparison on the effectiveness of four types of fish roe

Eel culture is solely dependent on wild seed stock, caught in estuaries during the freshwater migratory phase as glass eels. The methods used for weaning glass eels are very variable, and range from the use of live zooplankton to fish roe to fines of commercial fish feeds. The present experiments were conducted on glass eels of the Australian shortfin eel, when the effectiveness of four types of readily available fish roe (European carp, mirror dory, orange roughy and warehou) were evaluated over a 42-day period, in the laboratory.

After 28 days the eels did not show an interest in orange roughy and mirror dory roe, and these two treatments were discontinued to avoid mortality. In all treatments there was a decrease in mean weight during this period, but the survival was over 99%. In the 28th to 42nd day period the mean weight and specific growth rate of glass eels reared on European carp and warehou roe increased, but the differences between these two treatments were not significant.

The physical features of the roe and the oocytes thereof, the proximate composition, amino acid and fatty acid composition indicated major differences amongst the roe types, particularly with regard to the amount of n−6 polyunsaturated fatty acids (PUFA) and the ratio of n−3 to n−6. European carp and warehou roe (and oocytes) had a significantly higher arachidonic acid (AA-20:4n−6; over 60% of PUFA) content and a considerably lower n−3 to n−6 ratio (n−3 to n−6 ratio being 1.32, 5.92, 3.77 and 2.67 for roe types, and 1.25, 4.83, 2.91 and 2.42 for oocytes, of European carp, mirror dory, orange roughy and warehou, respectively), than in the other two roe types. The fatty acid profiles of European carp and warehou roe were similar to that of metamorphosing glass eels.

“Through a glass darkly” : a report on trends in school music education provision in Australia

This paper reports on research commissioned by the Music Council of Australia (MCA) on the provision of school music education in Australian states and territories. Using guidelines developed by the principal researcher, a team of state and territory investigators collected data on eleven research questions formulated by MCA’s Research Committee. The principal investigator compiled, analysed and interpreted the state data and synthesised the findings into an overview of
the current situation nationally. One of the major findings was the limited amount of uniform data available from education authorities; indeed, the inadequacy or non-availability of data from some states is a matter of serious concern in terms of public accountability for the school music provision. Nevertheless, the project provided an overview of the current state of school music education in all states and territories. In relation to three of the key indicators (numbers of specialist music teachers, numbers of students taught music, and numbers of students studying music at Year 12), the study revealed that the provision of music has not changed significantly over the past two decades—the situation has either remained static or has improved or declined slightly. The principal recommendation from the project is the need for a more comprehensive survey to be undertaken and a Deakin University team, in collaboration with the MCA as industry partner, will be applying for an ARC Linkage Grant which will investigate effective teaching of music in schools and the preparation of teachers for implementing music programs.

An autonomous trimming system of large glass fiber reinforced plastics parts using an omni-directional mobile robot and its control

This paper describes an automated trimming system of large glass fiber reinforced plastic (GFRP) using an omni-directional wheeled mobile robot (WMR) and its path control method. In trimming GFRP parts, much glass fiber and plastic powder dust occur and it becomes bad visible in environment. It is necessary to correct dead-reckoning errors of the WMR in order to control its moving path. We have discussed an external correction method of the dead-reckoning errors for the WMR using ultrasonic sensor.

Effect of relaxation on pressure sensitivity index in a Zr-based metallic glass

Shear-banding features of as-cast and annealed Zr_41.2Ti_13.8Cu_12.5Ni₁₀Be_22.5 bulk metallic glass were investigated through Rockwell indentation tests. Isothermal annealing of the as-cast samples was conducted at temperatures below its glass transition temperature, Tg. The exothermal enthalpy during continuous heating below Tg decreases with increasing annealing temperature, indicating the gradual reduction of free-volume upon annealing. The observation on the morphology of shear-banding pattern around the indents implies a reduced shear bands activity in the annealed samples. The included angles (2θ) between two families of shear bands emanating from the edge of Rockwell indent decrease from 88° for the as-cast sample to 79° for the sample annealed at 633 K for 1 h, indicating a pressure sensitive plasticity. By Mohr–Coulomb criterion, the pressure sensitive index can be obtained on the basis of the measured 2θ, which increases with increasing annealing temperature, indicating an increase of “atomistic friction” due to the reduction of the free volume upon annealing.

Composition dependency of the glass forming ability (GFA) in Mg—Ni—Si system by mechanical alloying

The pure elemental powder mixtures with the compositions of Mg₆₅Ni_xSi₃₅−_x (x = 10, 20, 25, 33 at.%) were subject to high-energy ball mill, and the structures of the mixtures at different intervals of milling were characterised by X-ray diffraction (XRD). The compositional dependency of the glass forming ability (GFA) in Mg–Ni–Si system was evaluated based on the experimental results and the theoretical calculation. The compositional dependency of GFA in Mg–Ni–Si system can be understood well by comparing the enthalpies of the crystalline and amorphous phases based on the Miedema's theory for the formation enthalpy of alloys. Increasing the Ni/Mg ratio and/or decreasing Si content can improve the amorphous formability. The calculation results might be of great help in optimising the composition with high GFA in Mg–Ni–Si system.

Indentation study on the pressure sensitivity of a ZR-based bulk metallic glass

Spherical indentation test was conducted on as-cast and annealed Zr_41.2Ti_13.8Cu_12.5Ni₁₀Be_22.5 bulk metallic glass, and the evolution of the morphology of the deformation zone of indents upon annealing was investigated. The DSC traces of the as-cast and annealed samples show that the enthalpy change at the glass transition, ΔH, decreases with the increasing of annealing temperature, indicating the reduction of the free volume upon annealing. The morphology of the indents implies a reduced shear band activity in the annealed samples. The included angles (2θ) between two families of shear bands emanating from the edge of spherical indent in the as-cast and the annealed samples were measured to be in the range of 88-79°, which decrease with the increasing of annealing temperature, indicating pressure sensitive plasticity in the as-cast and annealed samples. By Mohr–Coulomb criterion, the pressure sensitive index, α, can be obtained on the basis of the measured 2θ. The sensitivity index increases with increasing temperature, implying an increase of 'atomistic friction' due to the reduction of the free volume upon annealing.

Reduction of fuel consumption in an industrial glass melting furnace

Reduction of fuel consumption in glass melting furnaces can cut the cost of production, and tackle the global warming. This paper presents three independent solutions to reduce the fuel consumption in industrial glass melting furnaces. The solutions include air preheating, raw material preheating, and improving the insulation of combustion space refractory. Energy balance equations are derived and used to identify the effects of each solution. The results indicate that the three solutions reduce the fuel consumption by 9.5%, 17%, and 34%, respectively.

Preliminary observations on the tank and pond culture of the glass eels of the Australian shortfin eel, Anguilla Australis Richardson

There is expanding interest in the culture of the Australian shortfin eel Anguilla australis Richardson; however, there is a lack of fundamental biology and husbandry information necessary to further develop an industry within Australia. The present study was undertaken to gain a preliminary understanding of basic husbandry requirements for rearing of juvenile A. australis (glass eels and elvers) in tanks and earthen ponds. Newly caught glass eels were successfully acclimated to culture conditions. During tank culture trials, specific growth rates (SGR) and survival rates ranged from −2.1 to 2.8% day⁻¹ and 52% to 100% respectively. Glass eels weaned onto a commercial eel diet exhibited a significantly greater SGR and survival rate than those weaned onto a commercial trout diet. Glass eels weaned onto an eel diet over a 15-day period grew slightly faster than eels weaned over a 5-day period, but survival rates were not significantly different for each treatment. SGRs (up to 2.8% day⁻¹) were significantly higher for glass eels fed at 9 and 12% day⁻¹ than at 6% day⁻¹. Stocking densities between 2.5 kg m⁻³ and 30 kg m⁻³ did not influence either SGR or survival rates. SGRs were significantly higher for glass eels cultured at 25 °C than at lower temperatures. During pond culture trials, SGRs and survival rates ranged from 1.36 to 1.65% day⁻¹ and 39% to 77% respectively. The SGR and survival rates of juvenile eels stocked into ponds receiving supplementary feeding with a commercial eel diet were not significantly different to those of eels stocked into ponds that did not receive supplementary feeding.

Decisionmaking in a glass house : mass media, public opinion, and American and European foreign policy in the 21st century

"Decisionmaking in a Glass House: Mass Media, Public Opinion, and American and European Foreign Policy in the 21st Century" edited by Brigitte L. Nacos, Robert Y. Shapiro and Pierangelo Isernia is reviewed.