Influence of ocean currents on long-distance movement of leatherback sea turtles in the Southwest Indian Ocean

Leatherback turtles Dermochelys coriacea spend most of their life in oceanic environments, whose physical and biological characteristics are primarily forged by sea current circulation. Water mass movements can mechanically act on swimming turtles, thus determining their routes, and can differentially distribute their planktonic prey. By integrating satellite tracking data with contemporaneous remote-sensing information, we analysed the post-nesting journeys of 9 leatherbacks with respect to oceanographic surface conditions. Tracked turtles showed large variations in migration routes and in final destinations, apparently without heading for specific foraging areas. Their complex tracks spread over wide regions around South Africa. Leatherbacks were greatly influenced by the currents encountered during their movements, with their trajectories displaying curves or revolutions in the presence of (and in accordance with) rotating water masses. An impressive similarity was observed between large parts of the turtle routes and those of surface drifters tracked in the same regions. Finally, leatherbacks remained associated for long periods with specific oceanographic features, which most probably offered them profitable foraging opportunities. These results agree with previous findings in showing a strong influence of oceanic currents and mesoscale features on the movements of South African leatherbacks, and additionally identify the role of current-related features in causing the observed route variability and in determining high-quality foraging hotspots for leatherbacks moving in the ocean.

Habitat selection and energetics of the fiddler crab (Uca tangeri)

We tried to unravel the possible links between the skewed predation risk in Uca tangeri (where large individuals are more at risk from avian predators) and size-dependent changes in the physiology and habitat choice of this fiddler crab species. Over a transect running from low to high in the tidal zone of a beach in Mauritania, the temperature profile at various depths in the substrate, the water-table level of seep water, salt concentration of seep water, depth of the aerobic level, operative temperatures on the surface, and size distribution of crabs were assessed. In addition, resting metabolic rates, Q10 and thermal and starvation tolerances were estimated. Going from low to high in the tidal zone, crab size and burrow depth increased. At the preferred burrowing depth, microclimatological conditions appeared to be equally favourable at all sites. At the surface, conditions were more favourable low in the tidal zone, where also food availability is sufficient to enable small crabs to forage in the vicinity of their burrows. Large crabs have higher energy requirements and are thereby forced to forage in flocks low in the tidal zone where food is probably more abundant. Low in the tidal zone, digging deeply is impossible as the aerobic layer is rather thin. Large crabs prefer living high in the tidal zone as (1) deep burrows ensure better protection against predators, (2) more time is available for digging holes and (3) the substrate is better suited for reproduction. Energy reserves in late summer ensured an average of 34 days of survival. It is argued that the allotment of energy to growth must be considerable even in reproducing animals; the rewards of growth being the disproportional increase in reproductive output with size.

Microstructure and mechanical properties of Ti-15Zr alloy used as dental implant material

Ti-Zr alloys have recently started to receive a considerable amount of attention as promising materials for dental applications. This work compares mechanical properties of a new Ti-15Zr alloy to those of commercially pure titanium Grade4 in two surface conditions - machined and modified by sand-blasting and etching (SLA). As a result of significantly smaller grain size in the initial condition (1-2µm), the strength of Ti-15Zr alloy was found to be 10-15% higher than that of Grade4 titanium without reduction in the tensile elongation or compromising the fracture toughness. The fatigue endurance limit of the alloy was increased by around 30% (560MPa vs. 435MPa and 500MPa vs. 380MPa for machined and SLA-treated surfaces, respectively). Additional implant fatigue tests showed enhanced fatigue performance of Ti-15Zr over Ti-Grade4.

The determination of the local conditions for void initiation in front of a crack tip for materials with second-phase particles

A procedure is proposed to determine, for second-phase particles near a crack tip, the maximum particle stresses at the moment of void initiation by either particle fracture or particle/matrix interface separation. A digital image analysis system is applied to perform a quantitative analysis of corresponding fracture surface regions from stereo image pairs taken in the scanning electron microscope. The fracture surface analysis is used to measure, for individual particles, the crack tip opening displacement at the moment of void initiation and the particle location with respect to the crack tip. From these data, the stress tensor at the moment of void initiation is calculated from the Hutchinson–Rice–Rosengren (HRR) field theory. The corresponding average local stresses within the particle are evaluated by a non-linear Mori–Tanaka-type approach. These stresses are compared to estimates according to the models by Argon et al. [A.S. Argon, J. Im, R. Safoglu, Metall. Trans. 6 (1975) 825] and Beremin [F.M. Beremin, Metall. Trans. 12 (1981) 723]. The procedure is demonstrated on an Al6061–10% Al2O3 metal matrix composite.

The voltammetric reduction, deprotonation and surface activity of ruthenium photovoltaic sensitizers in acetone

The reductive voltammetry of the photovoltaic sensitizer [(H2-dcbpy)2Ru(NCS)2] (H2-dcbpy=2,2′-bipyridine-4,4′-dicarboxylic acid) and [(H3-tctpy)Ru(NCS)3]− (H3-tctpy=2,2′:6′,2″-terpyridine-4,4′,4″-tricarboxylic acid) has been investigated in acetone. Significant surface interactions at both platinum and glassy carbon electrodes occur at 0.6 V prior to the reversible potential expected for ligand-based reduction process of the fully protonated acids. The origin of the surface interactions are attributed to the acid–base behaviour of the compounds, combined with overall deprotonation and reduction to hydrogen, since repetitive cycling of the potential reveals well-defined reversible reduction processes in the negative potential range, resulting from formation of doubly deprotonated [(H-dcbpy−)2Ru(NCS)2]2− and singly deprotonated [(H2-tctpy−)Ru(NCS)3]2−, respectively. The extent of the surface interactions has been estimated by electrochemical quartz crystal microbalance and chronocoulometric measurements. Under certain conditions, a thick conducting polymer consisting of several hundred monolayers is formed.

Effects of atmospheric pressure plasma on dye uptake by the surface of wool

A woven pure wool fabric has been exposed to atmospheric pressure plasma for 30 seconds using a pilot-scale. commercial machine. X-ray photoelectron spectral data revealed large increases in oxygen and nitrogen. and a large reduction in carbon. on the surfaces of the plasma-treated fibres. A CIN ratio of 3.55 for plasma-treated wool was consistent with removal of the covalently-bound fatty acids from the surface of the cuticle cells. resulting in exposure of the proteinaceous epicuticle. Dye staining experiments revealed that the back of the fabric had received the same, uniform level of treatment as the face, despite the fact that only the face had been directly exposed to the plasma. Dyes (1 % oww) were applied to fabric at 50°C (liquor ratio =40: 1) and pH values from 3 to 6. The relatively low temperature of 50°C was selected in order to accentuate the effects of plasma on the rate of dye uptake. Under these conditions, dye was adsOibed onto the fibre surfaces, with very little penetration into the fibres. Effects of the plasma treatment on the rate of dyes adsorption were dyespecific. No significant effects of plasma on the rate of dye uptake were observed with relatively hydrophobic dyes, but hydrophilic dyes were adsorbed more rapidly by the plasmatreated fabric. It would appear that for more hydrophobic dyes, hydrophobic effects are more important for the adsorption of dyes by the plasma-treated fibres, even though these fibres were quite hydrophilic. On the other hand. it is concluded that for more hydrophilic dyes, electrostatic effects are more important for adsorption by the plasma-treated fibre.

Response surface optimisation of medium components for naringinase production from staphylococcus xylosus MAK 2

Response surface methodology was used to optimize the fermentation medium for enhancing naringinase production by Staphylococcus xylosus. The first step of this process involved the individual adjustment and optimization of various medium components at shake flask level. Sources of carbon (sucrose) and nitrogen (sodium nitrate), as well as an inducer (naringin) and pH levels were all found to be the important factors significantly affecting naringinase production. In the second step, a 22 full factorial central composite design was applied to determine the optimal levels of each of the significant variables. A second-order polynomial was derived by multiple regression analysis on the experimental data. Using this methodology, the optimum values for the critical components were obtained as follows: sucrose, 10.0%; sodium nitrate, 10.0%; pH 5.6; biomass concentration, 1.58%; and naringin, 0.50% (w/v), respectively. Under optimal conditions, the experimental naringinase production was 8.45 U/mL. The determination coefficients (R ²) were 0.9908 and 0.9950 for naringinase activity and biomass production, respectively, indicating an adequate degree of reliability in the model.

Anomalous evaporation behavior of ZnO powder milled mechanically under high-energy conditions

ZnO powder showed anomalous evaporation behavior after its mechanical milling treatment under high-energy conditions. The amount of generated vapor is about 10 times higher in the first 15 min of annealing at 1300 °C than that of unmilled ZnO powders. The strong ball impacts are responsible for the greatly enhanced evaporation ability. Low-energy ball milling involving shearing actions and rare weak impacts leads only to a small evaporation rate enhancement. The possible explanation of the high evaporation rate of the heavily milled material is the existence of large fraction of weakly bonded atoms in grain boundaries, surface defects and strained areas.

Effect of cold drawing on subsequent surface strain path and ductility during upsetting

Cold drawing is a process that sizes and smooths the surface of steel before it is cold headed to produce bolts. The effect of the changes in the mechanical properties due to cold drawing on the surface strain and ductility during the upsetting process was analysed showing that the stress and strain state can be more readily altered by changes in the process conditions (friction and height-to-diameter ratio) to cause greater increase in the failure strains than can be achieved by pre-drawing.

Exploring molecular changes at the surface of polypropylene after accelerated thermomolecular adhesion treatments

A central composite rotatable design (CCRD) method was used to investigate the performance of the accelerated thermomolecular adhesion process (ATmaP), at different operating conditions. ATmaP is a modified flame-treatment process that features the injection of a coupling agent into the flame to impart a tailored molecular surface chemistry on the work piece. In this study, the surface properties of treated polypropylene were evaluated using X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). All samples showed a significant increase in the relative concentration of oxygen (up to 12.2%) and nitrogen (up to 2.4%) at the surface in comparison with the untreated sample (0.7% oxygen and no detectable nitrogen) as measured by XPS. ToF-SIMS and principal components analysis (PCA) showed that ATmaP induced multiple reactions at the polypropylene surface such as chain scission, oxidation, nitration, condensation, and molecular loss, as indicated by changes in the relative intensities of the hydrocarbon (C₃H₇⁺ , C₃H₅⁺ , C₄H₇⁺, and C₅H₉⁺), nitrogen and oxygen-containing secondary ions (C₂H₃O⁺, C₃H₈N⁺, C₂H₅NO⁺, C₃H₆NO⁺, and C₃H₇NO⁺). The increase in relative intensity of the nitrogen oxide ions (C₂H₅NO⁺ and C₃H₇NO⁺) correlates with the process of incorporating oxides of nitrogen into the surface as a result of the injection of the ATmaP coupling agent.

Analysis of 5-hydroxyisoflavones by surface-enhanced Raman spectroscopy : genistein and methoxy derivatives

A series of 5-hydroxy-isoflavones—genistein, biochanin A, prunetin, and 4′,7-dimethoxygenistein—have been studied by surface-enhanced Raman spectroscopy (SERS). Citrate reduced silver colloids were employed as a standard technique to measure SER spectra over a range of pH and concentrations. Density functional theory calculations were used to assist in determining the mode of interaction of isoflavones with the silver nanoparticles. It is revealed that biochanin A and prunetin interact with the silver nanoparticles upon deprotonation of the 7- and the 4′-OH groups, respectively, to show SERS activity. Correlations of their spectra with SERS of genistein strongly support the presence of multiple interaction modes involving both of the OH groups in genistein, in a similar manner to daidzein. Surprisingly, however, under these conditions, the 5-OH group was found to be noninteractive as revealed by attempts to measure SERS of 4′,7-dimethoxygenistein. This was attributed partly to the low solubility and, more importantly, to the influence of steric hindrance, caused by the position of the pendant phenyl ring, which prevented interaction with the Ag colloid surface. These results complement recent work on daidzein and formononetin and provide further insight into understanding the SER spectra of isoflavones.

The influence of surface forces on thin film drainage between a fluid drop and a flat solid

An experiment is described in which a mica surface is driven towards a mercury drop immersed in aqueous electrolyte. Under appropriate conditions, hydrodynamic pressure in the aqueous film creates a classical dimple in the mercury drop. The use of optical interferometry and video recording to monitor the shape of the drop and the thickness of the aqueous film with sub-nanometre resolution yields a high density of precise data showing the formation and evolution of the dimple as the film drains. Variation of electrical potential applied to the mercury phase allows control of the surface forces acting between the drop and the mica surface, so that the effect of surface forces on the film drainage process is highlighted. It is found that the film thickness at the centre of the dimple and the lateral extent of the dimple are not significantly affected by surface forces. On the other hand, the minimum film thickness at the edge of the dimple is sensitive even to weak surface forces. Since this minimum film thickness is a major determinant of the film drainage rate, it is shown that surface forces have an important effect on the overall drainage process.

The effect of surface and hydrodynamic forces on the shape of a fluid drop approaching a solid surface

This paper describes an experiment designed to measure surface and hydrodynamic forces between a mercury drop and a flat mica surface immersed in an aqueous medium. An optical interference technique allows measurement of the shape of the mercury drop as well as its distance from the mica, for various conditions of applied potential, applied pressure, and solution conditions. This enables a detailed exploration of the surface forces, particularly double-layer forces, between mercury and mica. A theoretical analysis of drop shape under the influence of surface forces shows that deformation of the drop is a sensitive indicator of the forces, as well as being a very important factor in establishing the overall interaction between the solid and the fluid.