Influence of helium atmospheric plasma treatment on surface and fracture-mechanical behaviour of quickstepTM cured bio-composites

This work investigated the potential of improving flexural properties of natural fiber (jute) reinforced biocomposites by atmospheric pressure helium plasma treatment. Composites were made by the use of combined hand lay-up and vacuum bagging technique followed by newly developed Australia patented Quickstep^TM curing. The physical properties of helium plasma modified fibers were investigated by means of wettability time, coefficient of friction (COF), atomic force microscopy (AFM) and chemical nature of the surface with ATR-FTIR and XPS. There was found a logical correlation between physical and chemical characteristics of the surface of fiber with the fracture mechanical behavior of their resulting biocomposites. In addition, the use of helium atmospheric plasma treatment prior to Quickstep^TM process has proved to be a potential way to positively alter the fracture-mechanical behavior of biocomposites. This study will lead to new commercial applications of natural fiber jute for the composite industry that go beyond wrapping and packaging.

Influence of atmospheric helium plasma on the surface energy of jute fibres and the performance of resulting composites

In this work, an atmospheric pressure glow discharge helium plasma treatment was employed to modify the surface properties of jute fibres. The resulting bio-composites showed an increase in flexural properties and interlaminar shear strength (ILSS) compared to composites produced using untreated jute fibres. To understand the reason behind the ILSS improvement, the acid–base properties of jute fibres were determined by contact angle analysis using the capillary rise method. The results were fitted further to van Oss–Chaudhury–Good (vOCG) and Chang–Qin–Chen (CQC) models to determine the Lifshitz–van der Waals (LW) and acid–base components of surface energy. Surface energy determined by the vOCG model revealed that plasma treatment of jute fibre resulted in a 22% increase in total surface energy, a 19% increase in the LW component and a 24% increase in the acid–base component of surface energy. The increase in the acid–base component is due to the significant increase (69%) in the electron-accepting (γ+S) parameter. On the other hand, the CQC model clearly indicates an amphoteric nature of the fibre surface based on opposite signs of the acid and base principal values (PSa and PSb). Overall, the results indicated that increases in both LW and acid–base components were responsible for improvement in the properties of the composites.

Nanopatterning and electrical tuning of MoS2 layers with a subnanometer helium ion beam

We report subnanometer modification enabled by an ultrafine helium ion beam. By adjusting ion dose and the beam profile, structural defects were controllably introduced in a few-layer molybdenum disulfide (MoS2) sample and its stoichiometry was modified by preferential sputtering of sulfur at a few-nanometer scale. Localized tuning of the resistivity of MoS2 was demonstrated and semiconducting, metallic-like, or insulating material was obtained by irradiation with different doses of He(+). Amorphous MoSx with metallic behavior has been demonstrated for the first time. Fabrication of MoS2 nanostructures with 7 nm dimensions and pristine crystal structure was also achieved. The damage at the edges of these nanostructures was typically confined to within 1 nm. Nanoribbons with widths as small as 1 nm were reproducibly fabricated. This nanoscale modification technique is a generalized approach that can be applied to various two-dimensional (2D) materials to produce a new range of 2D metamaterials.

Investigation of chitosan adsorption onto cotton fabric with atmospheric helium/oxygen plasma pre-treatment

In this study, the effects of helium or a helium/oxygen mixture atmospheric pressure plasma treatment on the adsorption of chitosan onto the cotton fabric were investigated. Fabrics were treated with plasma prior to a chitosan finishing process, whereby fabrics were surface coated using a pad/dry/cure method. Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, surface energy analyser and contact angle measurements were used to investigate the changes on the cotton surface. Furthermore, antimicrobial activity of the cotton fabric was evaluated. The results showed that plasma pre-treatment enhanced the chitosan adsorption to the cotton surface through physical bonding and there was weak evidence of chemical bonding interactions. A combination of plasma and chitosan treatment did not show any significant differences on the antimicrobial properties compared to chitosan only treated fabric. Plasma treatment changed the fibres physically and enhanced the surface energy and thickness of chitosan distributed on the fibres.

Improvement of adhesion of conductive polypyrrole coating on wool and polyester fabrics using atmospheric plasma treatment

In this paper wool and polyester fabrics were pretreated with atmospheric plasma glow discharge (APGD) to improve the ability of the substrate to bond with anthraquinone-2-sulfonic acid doped conducting polypyrrole coating. A range of APGD gas mixtures and treatment times were investigated. APGD treated fabrics were tested for surface contact angle, wettability and surface energy change. Effect of the plasma treatment on the binding strength was analyzed by studying abrasion resistance, surface resistivity and reflectance. Investigations showed that treated fabrics exhibited better hydrophilicity and increased surface energy. Surface treatment by an APGD gas mixture of 95% helium/5% nitrogen yielded the best results with respect to coating uniformity, abrasion resistance and conductivity.

Simulation of the solar adsorption refrigeration operating at near atmospheric pressure

To solve the leaking problem faced by current vacuum adsorption refrigeration systems, the authors have carried out a series of studies on the concept of raising the system's pressure to around atmospheric pressure with an inert gas (eg. Helium) as the pressure-adjusting agent. This paper presents the simulation of the performance oj the activated carbon-methanol adsorption refrigeration operating at near atmospheric pressure powered by solar energy. This simulation can be refereed in the prototype design.

Effects of plasma treatment of wool on the uptake of sulfonated dyes with different hydrophobic properties

A wool fabric has been subjected to an atmospheric-pressure treatment with a helium plasma for 30 seconds. X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry confirmed removal of the covalently-bound fatty acid layer (F-layer) from the surface of the wool fibers, resulting in exposure of the underlying, hydrophilic protein material. Dye uptake experiments were carried out at 50 ºC to evaluate the effects of plasma on the rate of dye uptake by the fiber surface, as well as give an indication of the adsorption characteristics in the early stages of a typical dyeing cycle. The dyes used were typical, sulfonated wool dyes with a range of hydrophobic characteristics, as determined by their partitioning behavior between water and n-butanol. No significant effects of plasma on the rate of dye adsorption were observed with relatively hydrophobic dyes. In contrast, the relatively hydrophilic dyes were adsorbed more rapidly (and uniformly) by the plasma-treated fabric. It was concluded that adsorption of hydrophobic dyes on plasma-treated wool was influenced by hydrophobic interactions, whereas electrostatic effects predominated for dyes of more hydrophilic character. On heating the dyebath to 90 ºC in order to achieve fiber penetration, no significant effect of the plasma treatment on the extent of uptake or levelness of a relatively hydrophilic dye was observed as equilibrium conditions were approached.

Measuring the adhesion force on natural fibre surface using scanning probe microscopy

This work has focused on measuring the adhesion forces on both untreated and atmospheric helium plasma treated single jute fibre surfaces using scanning probe microscopy (SPM). The measurements were conducted on three differently aged surfaces for one week, three weeks and six weeks using a standard silicon nitride tip in force-volume (f-v) mode. Up to 256 adhesion data points were collected from various locations on the surface of the studied fibres using in-house developed software and the resulting data were statistically analysed by the histogram method. Results obtained from this analysis method were found to be very consistent with a small statistical variation. The work of adhesion, Wa, was calculated from measured adhesion force using the Johnson–Kendall–Roberts (JKR) and Derjaguin–Muller–Toporov (DMT) models. Increases in both adhesion force and work of adhesion were observed on jute fibre with certain levels of atmospheric plasma treatment and ageing time.

Effect of atmospheric plasma treatment on pad-dyeing of natural dyes on wool

Plasma treatment is an emerging surface modification technique that alters dye uptake of wool without using chemicals or water for pre-treatment. Padding is an established continuous dyeing technique known for its efficient use of water, time and energy. This study combined these two techniques for colouration of wool fabric using two natural dyes derived from the Acacia plant family. The investigation focused on the effects of plasma treatment and obtaining unique patterning effects. Helium (100%) and a mixture of helium and nitrogen (95%/5%) were used as the plasma gases under atmospheric conditions. Plasma treated wool fabric was padded with the above natural dyes. Copper sulphate and ferrous sulphate were applied on the dyed fabric as mordant yielding neutral shades of beige and grey respectively. Up to a 30% enhancement of dye adsorption on plasma treated wool substrate was observed as compared to untreated sample for both gases used. This higher adsorption indicates the hydrophilic character of the natural dyes used. Key performance parameters such as fastness to washing, rubbing and light were tested and found to be satisfactory. A single process tone-on-tone pattern was achieved by controlling the plasma exposure of treated area. This study concluded that a merger of natural dyes with modern plasma treatment and padding techniques for wool colouration was feasible.

Optimizing oxygen transport through La0.6Sr0.4Co0.2Fe0.8O3-δ hollow fiber by microstructure modification and Ag/Pt catalyst deposition

This work compares the oxygen permeation fluxes of five different La0.6Sr0.4Co0.2Fe0.8O3−δ membranes (e.g. disk, conventional hollow fiber, modified hollow fiber, Ag- or Pt-deposited hollow fiber membranes) to elucidate the dominance of a particular oxygen transport limiting step (e.g., bulk-diffusion or surface reaction) within each of these membranes. At 900 °C and 100 mL min–1 helium gas sweep rate, the oxygen fluxes for disk, conventional hollow fiber, modified hollow fiber, Ag-deposited modified hollow fiber, and Pt-deposited modified hollow fiber membranes are 0.10, 0.33, 0.84, 1.42, and 2.62 mL min–1 cm–2, respectively, denoting enhanced performance in this sequential order. More than 300% enhancement of fluxes is evidenced by modifying the geometry from disk to conventional hollow fiber. This is attributed to the thickness reduction from 1 mm to 0.3 mm, thus implying bulk-diffusion and surface reaction as the jointly limiting transport step for this disk membrane. In contrast to a conventional hollow fiber that has a sandwich cross-sectional structure (e.g. dense center layer sandwiched by two finger-like layers) as well as dense outer and inner circumference surfaces, the modified hollow fiber has only one dense layer in its outer circumference surface with finger-like porous layer extending all the way from outer cross-sectional part to the inner cross-sectional part. This microstructural difference, in turn, provides substantial reduction of membrane thickness and enlarges surface reaction area for modified hollow fiber (relative to conventional hollow fiber), both of which contributes to the reduced bulk-diffusion and surface reaction resistance; evidenced by almost 250% oxygen flux enhancement. To enhance the performance even further, catalyst (e.g., Ag or Pt) deposition on the outer circumference surface of modified hollow fiber can be utilized to reduce its dominating surface reaction resistance. While both catalysts increase the oxygen fluxes, Pt reveals itself as the better candidate relative to Ag due to melting-induced aggregation and growth of Ag at 950 °C.

Plasma assisted finishing of cotton fabric with chitosan

Chitosan is a natural and non-toxic polymer which can be used as a multifunctional, e.g. antimicrobial or anti-wrinkle, agent on cotton fabrics. However, due to the lack of strong bonding forces between two polysaccharides, chitosan coating on cotton has poor durability. To provide efficient and irreversible chitosan adsorption on cotton substrate, it is required to build appropriate binding sites and to activate the substrate material properly. For this purpose, plasma treatment can be a promising method as it can activate the surface of the cotton fabric and improve the adsorption of chemicals in a completely harmless procedure. In this study, we investigated the effect of atmospheric pressure plasma treatment on adsorption of chitosan onto the cotton fabric. The purpose of the study was to investigate to which extent adsorption of chitosan on cotton can be improved by helium plasma treatment. Fibre surface and adsorption of chitosan were characterized by X-ray Photoelectron Spectroscopy (XPS) and Fourier Transform Infrared (FTIR) spectroscopy. Changes in hydrophobicity of fabric`s surface and fibre morphology were evaluated using contact angle method and scanning electron microscopy (SEM), respectively. The results from XPS showed an increase in the C=O bonds on cotton fabrics oxydised by helium plasma treatmnets, confirming the formation of aldehyde groups in cellulose. The characteristic absorbance band of chitosan, amide II (N-H bending vibration) showed an enlargement for all fabrics treated with helium and chitosan, as assesed by FTIR. The absorbance peaks of CH2 stretching vibrations, which confirm chitosan existence, were stronger for all treated fabrics compared to the untreated control. While the plasma only treated fabric surface was very hydrophilic, the surface became hydrophobic after chitosan coating.