Self-assembly and film stability of a micelle of a single-chain quaternary ammonium amphiphile containing azobenzene on mica

The self-assembling behavior of a single-chain quaternary ammonium amphiphile bearing azobenzene (C₁₂AzoC₆N⁺) on freshly cleaved mica sheet has been investigated by atomic force microscopy (AFM) method. Confocal microscopic Raman spectra confirm the adsorption of the self-assembled monolayer structure. Ex-situ AFM reveals that C₁₂AzoC₆N⁺ forms branch-like stripes indicating the fusion and reorganization of the micelles during drying in air as the in-situ AFM has revealed that surfactant forms spherical micelles on the mica surface. The nano-sized surface structure is strongly dependent on the change of molecular structure, which resulted from photo-induced isomerization. The nano-sized stripe is quite stable even being annealed at 90 °C for 4 h.

Methanesulfonate and p-toluenesulfonate salts of the N-methyl-N-alkylpyrrolidinium and quaternary ammonium cations : novel low cost ionic liquids

The preparation and characterization of a series of novel salts, based on the N-methyl-N-alkylpyrrolidinium or quaternary ammonium organic cations coupled with sulfonate type anions, namely the mesylate (CH₃SO₃⁻) and tosylate (CH₃C₆H₄SO₃⁻) anions are reported. These salts are analogues of the previously described organic cation bis(trifluoromethanesulfonyl)amide (TFSA) salts that form useful ionic liquids of interest in “Green” synthesis. Several of the salts are liquid below 50 °C, e.g. tributylhexylammonium tosylate and ethylmethylpyrrolidinium mesylate and one is liquid at and below room temperature (tributylhexylammonium mesylate). These new salts have a cost advantage over salts of the TFSA⁻, PF₆⁻ and CF₃SO₃⁻ anions. Electrochemical and thermal properties have been investigated. The salts are stable to beyond 100 °C and exhibit electrochemical potential windows of at least ±2 V vs. Ag/Ag+. Some of the salts exhibit multiple crystalline phases below their melting points, potentially indicative of plastic crystal behaviour, whilst others showed more simple solid–liquid behaviour. Many of the salts were found to be glass forming.

Room-temperature molten salts based on the quaternary ammonium ion

The properties of a family of novel quaternary ammonium salts based on the bis(trifluoromethylsulfonyl)imide and triflate anions are reported. Binary phase diagrams for some of their mixtures and their electrochemical windows of stability are also reported. The highest conductivity observed in the pure salt systems at 25 °C was 7 × 10^-4 S cm^-1. An electrochemical window of stability of up to 5 V was measured on graphite electrodes. The effect of salt structure and solvent on conductivity of the salts is also discussed.

Synthesis and properties of ambient temperature molten salts based on the quaternary ammonium ion

The synthesis of 16 tetraalkyl ammonium bis(trifluoromethane sulfonyl) imide salts, (C_nH_2n+1)₄ +N -N (SO₂CF₃)₂ (n = 1, 2, 3, 4),  (C₂H₅)₂(i-C₃H₇)₂ +N -N(SO₂CF₃)₂, (C₂H₅)(CH₃)(i-C₃H₇)₂+N-N(SO₂CF₃)₂, (n-C₇H₁₅)(C₂H₅)i-C₃H₇)₂+N-N(SO₂CF₃)₂ and (C_nH_2n+1)(C_mH_2m+1)₃+N-N(SO₂CF₃)₂ (n = 6,7,8; m = 1, 2, 4) are reported in this paper. Trends in properties of these salts are discussed. The symmetrical tetraalkyl ammonium salts with the bis(trifluoromethyl sulfonyl) imide anion exhibited a lower melting point than that of corresponding ammonium halides. The salts with low symmetry ammonium cations were found to be of generally lower melting point, and many were stable liquids at room temperature. Several of these did not crystallize during cooling below room temperature and exhibited glass transition temperatures in the region of −60 °C∼−80 °C. A comparison of properties between the ammonium imide salts and corresponding trifluoromethane sulfonates is also presented.

Novel alkaline polymer electrolytes based on tetramethyl ammonium hydroxide

In this work, novel alkaline solid polymer electrolytes (SPEs) with tetramethyl ammonium hydroxide (Me₄NOH·xH₂O) have been developed, without addition of any volatile solvent. It was found that some polymers such as poly(sodium acrylate) had good compatibility with Me₄NOH·xH₂O. The polymer-Me₄NOH·xH₂O electrolytes thus prepared in this work appeared to have improved mechanical properties as compared with the pure hydroxide and remained highly conductive in the solid state (10² S cm⁻¹ at ~40 °C). The thermal properties of the alkaline SPEs and the dependence of conductivity on composition and temperature are presented, and the relationships between properties and composition as well as conductivity mechanism for these new systems are discussed.

Measurement of surface forces between mica sheets immersed in aqueous quaternary ammonium ion solutions

Forces between mica surfaces immersed in Me4NBr, Pr4NBr, and Pe4NBr solutions over a wide concentration range are reported (Me = methyl, Pr = propyl, Pe = pentyl). In each case the cation adsorbs quite strongly onto the negatively charged mica surface and determines the double-layer potential. However, this strong adsorption does not cause complete neutralization of the negative lattice charge apparently because of packing constraints due to the large size of these ions. Adsorption of Me4N+ ions gives rise to a short-range (<2 nm) repulsive force similar to that previously observed between bilayers of CTAB and may be due to the residual hydration of these ions. The large rations also, unexpectedly, give rise to short-range repulsive forces but of a somewhat different nature. In this case, the repulsive forces can be explained by assuming that the large adsorbed ions shift the plane of charge a distance of one ion diameter from the mica surface. At all but very high concentrations these larger ions could be displaced from the mica surfaces on forcing them together. No evidence of any “hydrophobic attraction” was observed between surfaces containing these adsorbed ions. Previous studies on coagulation are discussed in the light of our results.

Protic ionic liquids based on phosphonium cations : comparison with ammonium analogues

Novel protic ionic liquids (PILs) based on a tributyl phosphonium cation have been synthesised and characterised, revealing that the phosphonium based ILs show high thermal stability, high ionic conductivity and facile proton reduction compared to the corresponding ammonium based ILs.

Novel immobilization of a quaternary ammonium moiety on keratin fibers for medical applications.

This paper introduces a new approach for immobilizing a quaternary ammonium moiety on a keratinous substrate for enhanced medical applications. The method involves the generation of thiols by controlled reduction of cystine disulfide bonds in the keratin, followed by reaction with [2-(acryloyloxy)ethyl]trimethylammonium chloride through thiol-ene click chemistry. The modified substrate was characterized with Raman and infrared spectroscopy, and assessed for its antibacterial efficacy and other performance changes. The results have demonstrated that the quaternary ammonium moiety has been effectively attached onto the keratin structure, and the resultant keratin substrate exhibits a multifunctional effect including antibacterial and antistatic properties, improved liquid moisture management property, improved dyeability and a non-leaching characteristic of the treated substrate.

Characterisation of ion transport in sulfonate based ionomer systems containing lithium and quaternary ammonium cations

Two sulfonated ionomers based on poly(triethylmethyl ammonium 2-acrylamido-2-methyl-1-propane sulfonic acid) (PAMPS) and containing mixtures of Li⁺ and quaternary ammonium cations are characterised. The first system contains Li⁺ and the methyltriethyl ammonium cation (N1222) in a 1:9 molar ratio, and the ⁷Li NMR line widths showed that the Li⁺ ions are mobile in this system below the glass transition temperature (105°C) and are therefore decoupled from the polymer segmental motion. The conductivity in this system was measured as 10^-5 Scm^-1 at 130°C. A second PAMPS system containing Li⁺ and the dimethylbutylmethoxyethyl ammonium cation (N114(2O1)) in a 2:8 molar ratio showed much lower conductivities despite a significantly lower Tg (60°C), possibly due to associations between the Li⁺ and the ether group on the ammonium cation, or between the latter cations and the sulfonate groups.

Reduction of oxygen in a trialkoxy ammonium-based ionic liquid and the role of water

The oxygen reduction reaction in a novel trialkoxy ammonium-based ionic liquid, N-ethyl-2-(2-methoxyethoxy)-N,N-bis(2-(2-methoxyethoxy)ethyl)ethan-1-aminium bis(trifluoromethylsulfonyl)imide, [N2(20201)(20201)(20201)] [NTf2] has been studied on glassy carbon and gold electrodes, showing faster electrokinetics on glass carbon because of weaker adsorption of the IL. This has been demonstrated by theoretical calculations and electrochemical studies. In the neat IL, the oxygen is reduced to superoxide (O2 -) through a one electron process; however, better performance is attained in the presence of water (42 mol%), in terms of current density, and onset potential of the reduction process via a reversible 2-electron process. Furthermore, a remarkable increase in cyclic coulombic efficiency is observed for the wet IL (66% in comparison with the neat IL (24%), showing the practicality of a reversible O2/H2O2 system for energy storage.