Hybrid special finite element method for bi-material crack

In the paper, two novel 2-D hybrid special finite elements each containing an interfacial edge crack, which lies along or vertical to the interface between two materials, are developed. These proposed elements can assure the high precision especially in the vicinity of crack tip and provide a better description of its singularity with only one hybrid element surrounding one interfacial crack, thus, the numerical modeling of fracture analysis on bi-material crack can be greatly simplified. Numerical examples are provided to demonstrate the validity and versatility of the proposed method.

Effect of transformation volume contraction on the toughness of superelastic shape memory alloys

Shape memory alloys (SMAs) exhibit two very important properties: shape memory phenomenon and superelastic deformation due to intrinsic thermoelastic martensitic transformation. To fully exploit the potential of SMAs in developing functional structures or smart structures in mechanical and biomechanical engineering, it is important to understand and quantify the failure mechanisms of SMAs. This paper presents a theoretical study of the effect of phase-transformation-induced volume contraction on the fracture properties of superelastic SMAs. A simple model is employed to account for the forward and reverse phase transformation with pure volume change, which is then applied to numerically study the transformation field near the tip of a tensile crack. The results reveal that during steady-state crack propagation, the transformation zone extends ahead of the crack tip due to forward transformation while partial reverse transformation occurs in the wake. Furthermore, as a result of the volume contraction associated with the austenite-to-martensite transformation, the induced stress-intensity factor is positive. This is in stark contrast with the negative stress-intensity factor achieved in zirconia ceramics, which undergoes volume expansion during phase transformation. The reverse transformation has been found to have a negligible effect on the induced stress-intensity factor. An important implication of the present results is that the phase transformation with volume contraction in SMAs tends to reduce their fracture resistance and increase the brittleness.

Fracture analysis of spot-welds with edge cracks using 2-D hybrid special finite element

This paper employed a systematic analysis using a 2-D hybrid special finite element containing an edge crack in order to describe the fracture behavior of spot-welds in automotive structures. The 2-D hybrid special finite element is derived form a mixed formulation with a complex potential function with the description of the singularity of a stress field. The hybrid special finite element containing an edge crack can give a better description of its singularity with only one hybrid element surrounding one crack. The advantage of this special element is that it can greatly simplify the numerical modeling of the spot welds. Some numerical examples demonstrate the validity and versatility of the present analysis method. The lap-shear, lap-tension and angle-clip specimens are analyzed and some useful fracture parameters such as the stress intensity factor and the initial direction of crack growth are obtained simultaneously.

Fracture analysis of spherical shells : application to cracking of macadamia nuts

The main consideration in recovering the macadamia kernal is to crack the spherical nutshell without damaging the kernal. Five mechanical cracking tools were tested, and the fracture mechanisms of nutshells, under various cracking loads, were studied. A classical theoretical approach and a numerical method were both used to investigate the influence of crack face closure on the stress intensity factor for a cracked spherical shell subjected to membrane forces and bending moments.

Modelling of laser beam spot-weld using 2-D hybrid crack finite elements

Laser beam spot-welding is widely applied to join sheet metals for automotive components especially for thinsheet components in automotive industries. The spot welds in such metallic structures contribute a lot to the integrated strength and fatigue life for the whole structures and they are responsible for their damage or collapse in some loading cases. In this paper, the 2-D hybrid special finite elements each containing an edge crack are employed to study the fracture behaviors of laser beam spot-welds. Hence the calculation accuracy in the vicinity of crack tips is ensured, and a better description of stress singularity with only one hybrid element surrounding one crack is provided. The numerical modeling for laser beam spot-welds subjected to three typical modes ofloadings including tension-lap, shear-lap and angle-clip can be greatly simplified with the applications of such elements. Three specimens under lap-shear, lap-tension and angle clip are devised and analyzed respectively, and main fracture parameters such as stress intensity factors and the initial direction of crack growth are obtained through tinite element analyses. The computed results ti'om numerical examples demonstrate the validity and versatility of the proposed modeling.

Task-specific effects of modular body armor.

Eleven recreationally active males performed 11 circuits of military work, wearing torso armor on one occasion, and full armor on another. Performance was measured by the time taken to complete individual tasks, and the overall time to completion (TTC) for each circuit. Heart rate, intestinal temperature, ratings of perceived exertion (RPE), and thermal sensation were recorded after each circuit. Participants' circuit TTC was no different between conditions; however, specific tasks were differentially impeded by the two armor configurations. Vaulting and crawling were significantly slower (0.28 ± 0.06 and 0.55 ± 0.26 seconds) in full armor; however, box lifting and shooting were significantly slower (0.36 ± 0.18 and 0.86 ± 0.23 seconds) when wearing torso armor. Heart rate and core temperature were significantly higher during the full armor trial (5 ± 1 beats · min(-1) and 0.22 ± 0.03 °C). Similarly, RPE and thermal sensation were significantly higher (1 ± 0 and 0.5 ± 0.0) during the full armor condition. Military tasks were differentially impaired by the armor configurations used, which suggests a need to explore role-specific armor for military personnel. Physiological and perceptual responses were elevated in full armor, which could be exacerbated during longer periods of work or in hot conditions.

Fatigue crack growth in ultrafine grained aluminium alloy

The microstructure, fatigue crack growth behaviour and hardness of ultra fine grained 6061 aluminium alloy obtained by equal angle channel processing was studied. ECAP resulted in significant grain refinement down to the sub micron level and corresponding increase in hardness. Results point to a similar fatigue threshold stress intensity range and fatigue crack growth rates for 1, 2, 4 and 6 passes of ECAP.

Theoretical study on the (1-012) deformation twinning and cracking in coarse-grained magnesium alloys

This paper theoretically and systematically investigates: (1) the effect of local transformed strains within deformation twinning on twin intersection; (2) the fracture mode based on type I co-zone tensile twin intersection in coarse-grained magnesium alloys, as well as the impacts of twin intersection and grain diameter on interfacial crack nucleation along twin boundaries; and (3) the influence of the local stresses arising from the encountered twin bands on crack growth. A novel dislocation-based strain nucleus model and a Green's function method, which are applicable to any material with local transformations in which elastic properties are reasonably approximated as isotropic, are specifically employed to model the concentrated transformed strain and calculate the local stress field resulting from deformation twinning and the stress intensity factors at crack tips in the magnesium alloys, respectively. In addition, an electron backscatter diffraction (EBSD) measurement is provided for crack nucleation originating from Type I co-zone tensile twin intersection. The theoretical modeling indicates: (i) the local strains within barrier twins strongly dictate the growth of incident twins and enhance the twin propagation stress; (ii) larger grains favor brittle fracture. More specifically, the dislocation reactions and pile-ups at the junctions between tensile twins can result in interfacial crack nucleation and growth along the twin boundaries, which is a brittle fracture mode based on lower twinning stress and stress concentration in the coarse-grained magnesium alloys; and (iii) the direction of crack propagation is easily changed by high-density twin bands and twin intersections owing to the local strains.

Leontief paradox and the role of factor intensity measurement

In contrast with the prediction of the Heckscher-Ohlin (HO) theorem, Leontief (1953) found that the capital-labor ratio embodied in the US exports is smaller than the capital-labor ratio embodied in the US competitive import replacements. In Leontief's analysis, the measured factor content of US imports is computed based on the assumption that all countries are using the US factor intensity techniques. This paper relaxes all assumption of identical factor intensity techniques. It uses an inferring method to infer the factor intensity techniques of different countries based on international relative factor price differences. With the inferred differentiated factor intensity techniques , the Leontief paradox is re-investigated and is found to be either disappeared or eased.

Impact of training on changes in perceived stress and cytokine production

Data on training of competitive athletes and the inflammatory response, and, more specifically, the utility of psychological inventories to monitor this response in regards to overreaching is limited. The aim of the present study was to investigate the association of the Perceived Stress Scale (PSS) and inflammatory markers in elite rowers. Eight rowers (males n = 4; females n = 4) were monitored over an 8-week training period, comprising 12 sessions each week and training an average 3.11 h·d-1. Training volume was periodized weekly while intensity was maintained throughout the study. Perceived stress was measured weekly pretraining, and capillary blood samples (500 μL) were taken post-training. Significant associations between perceived stress and cytokines interleukin-6 (p < .05) and tumor necrosis factor alpha (p < .05) were observed. While further investigation of the role of cytokines in the overtraining process is required, these data provide preliminary support for an association between perceived stress and the inflammatory responses to training.

Cell cycle sensing of oxidative stress in saccharomyces cerevisiae by oxidation of a specific cysteine residue in the transcription factor Swi6p

Yeast cells begin to bud and enter S phase when growth conditions are favourable during G1 phase. When subjected to some oxidative stresses, cells delay entry at G1 allowing repair of cellular damage. Hence, oxidative stress sensing is coordinated with the regulation of cell cycle. We identified a novel function of the cell-cycle regulator of Saccharomyces cerevisiae, Swi6p, as a redox sensor through its cysteine residue at position 404. When alanine was substituted at this position, the resultant mutant, C404A, was sensitive to several reactive oxygen species and oxidants including linoleic acid hydroperoxide, the superoxide anion and diamide. This mutant lost the ability to arrest in G1 phase upon treatment with lipid hydroperoxide. The Cys404 residue of Swi6p in wild-type cells was oxidised to a sulfenic acid when cells were subjected to linoleic acid hydroperoxide. Mutation of Cys404 to Ala abolished the down-regulation of expression of the G1 cyclin genes CLN1, CLN2, PCL1 and PCL2 that occurred when cells of the wild type were exposed to the lipid hydroperoxide. In conclusion, oxidative stress signaling for cell-cycle regulation occurs through oxidation of the G1/S-speicific transcription factor Swi6p and consequently leads to suppression of the expression of G1-cyclins and delay in cells entering the cell cycle.

Regulation of scleral cell contraction by transforming growth factor-β and stress competing roles in myopic growth

Reduced extracellular matrix accumulation in the sclera of myopic eyes leads to increased ocular extensibility and is related to reduced levels of scleral transforming growth factor-β (TGF-β). The current study investigated the impact of this extracellular environment on scleral cell phenotype and cellular biomechanical characteristics. Scleral cell phenotype was investigated in vivo in a mammalian model of myopia using the myofibroblast marker, α-smooth muscle actin (α-SMA). In eyes developing myopia α-SMA levels were increased, suggesting increased numbers of contractile myofibroblasts, and decreased in eyes recovering from myopia. To understand the factors regulating this change in scleral phenotype, the competing roles of TGF-β and mechanical stress were investigated in scleral cells cultured in three-dimensional collagen gels. All three mammalian isoforms of TGF-β altered scleral cell phenotype to produce highly contractile, α-SMA-expressing myofibroblasts (TGF-β3 > TGF-β2 > TGF-β1). Exposure of cells to the reduced levels of TGF-β found in the sclera in myopia produced decreased cell-mediated contraction and reduced α-SMA expression. These findings are contrary to the in vivo gene expression data. However, when cells were exposed to both the increased stress and the reduced levels of TGF-β found in myopia, increased α-SMA expression was observed, replicating in vivo findings. These results show that although reduced scleral TGF-β is a major contributor to the extracellular matrix remodeling in the myopic eye, it is the resulting increase in scleral stress that dominates the competing TGF-β effect, inducing increased α-SMA expression and, hence, producing a larger population of contractile cells in the myopic eye.

Stress-induced peak (but not resting) metabolism correlates with mating display intensity in male guppies

Recent empirical and conceptual papers have highlighted the potential for metabolism to act as a proximate mechanism for behavior that could explain animal personality (consistency over time). Under this hypothesis, individuals with consistently high levels of behavioral activity should also have high resting metabolic rate (RMR) as it can reflect capacity to process food and generate energy. We tested for the predicted positive covariance between RMR and three behaviors that differ in energy demands in 30 male guppies, using multivariate mixed models; we repeatedly measured their activity (10 times each), courtship displays (nine times), voracity (10 times), and metabolism (four-times). Resting metabolic rate (measured overnight in respirometry trials) did not consistently differ among males, whereas initial peak metabolism measured during those same trials (R = 0.42), and all behaviors were repeatable (R = 0.33–0.51). RMR declined over time suggesting habituation to the protocol, whereas peak metabolism did not. Initial peak metabolism was negatively correlated with courtship display intensity, and voracity was positively correlated with activity, but all other among-individual correlations were not significant. We conclude that RMR does not provide a proximate explanation for consistent individual differences in behavior in male guppies, and therefore the potential for independent evolution of these physiological and behavioral traits seems possible. Finally, we identify peak metabolism as a potential measure of the stress response to confinement, which highlights the value of considering various aspects of metabolic rates recording during respirometry trials.

Regulation of redox and DNA repair genes by arsenic : low dose protection against oxidative stress?

We have evaluated the molecular responses of human epithelial cells to low dose arsenic to ascertain how target cells may respond to physiologically relevant concentrations of arsenic. Data gathered in numerous experiments in different cell types all point to the same conclusion: low dose arsenic induces what appears to be a protective response against subsequent exposure to oxidative stress or DNA damage, whereas higher doses often provoke synergistic toxicity. In particular, exposure to low, sub-toxic doses of arsenite, As(III), causes coordinate up-regulation of multiple redox and redox-related genes including thioredoxin (Trx) and glutathione reductase (GR). Glutathione peroxidase (GPx) is down-regulated in fibroblasts, but up-regulated in keratinocytes, as is glutathione S-transferase (GST). The maximum effect on these redox genes occurs after 24 h exposure to 5–10 mM As(III). This is 10-fold higher than the maximum As(III) concentrations required for induction of DNA repair genes, but within the dose region where DNA repair genes are co-ordinately down-regulated. These changes in gene regulation are brought about in part by changes in DNA binding activity of the transcription factors activating protein-1 (AP-1), nuclear factor kappa-B, and cAMP response element binding protein (CREB). Although sub-acute exposure to micromolar As(III) up-regulates transcription factor binding, chronic exposure to submicromolar As(III) causes persistent down-regulation of this response. Similar long-term exposure to micromolar concentrations of arsenate in drinking water results in a decrease in skin tumour formation in dimethylbenzanthracene (DMBA)/phorbol 12-tetradecanoate 13-acetate (TPA) treated mice. Altered response patterns after long exposure to As(III) may play a significant role in As(III) toxicology in ways that may not be predicted by experimental protocols using short-term exposures.