Strain gradients in Cu-Fe thin films and multilayers during micropillar compression

Plastic strain gradients can influence the work-hardening behaviour of metals due to the accumulation of geometrically necessary discolations at the micron/submicron scale. A finite element model based on the conventional theory of mechanism-based strain-gradient plasticity has been developed to simulate the micropillar compression of Cu–Fe thin films and multilayers. The modelling results show that the geometric constraints lead to inhomogeneous deformation in the Cu layers, which agrees well with the bulging of Cu layers observed experimentally. Plastic strain gradients develop inside the individual layers, leading to extra work-hardening due to the accumulation of geometrically necessary dislocations. In the multilayer specimens, the Cu layers deform more severely than the Fe layers, resulting in the development of tensile stresses in the Fe layers. It is proposed that these tensile stresses are responsible for the development of micro-cracks in the Fe layers.

Strain gradient plasticity modelling of high-pressure torsion

Gradient plasticity modelling combining a micro-structure-related constitutive description of the local material behaviour with a particular gradient plasticity frame is presented. The constitutive formulation is based on a phase mixture model in which the dislocation cell walls and the cell interiors are considered as separate 'phases', the respective dislocation densities entering as internal variables. Two distinct physical mechanisms, which give rise to gradient plasticity, are considered. The first one is associated with the occurrence of geometrically necessary dislocations leading to first-order strain gradients; the second one is associated with the reaction stresses due to plastic strain incompatibilities between neighbouring grains, which lead to second-order strain gradients. These two separate variants of gradient plasticity were applied to the case of high-pressure torsion: a process known to result in a fairly uniform, ultrafine grained structure of metals. It is shown that the two complementary variants of gradient plasticity can both account for the experimental results, thus resolving a controversial issue of the occurrence of a uniform micro-structure as a result of an inherently non-uniform process. © 2007 Elsevier Ltd. All rights reserved.

Modelling the combined effect of grain size and grain shape on plastic anisotropy of metals

Within each columnar grain of a metallic film, the resistance to dislocation glide varies in function of the orientation of the slip plane with regard to the grain long axis. Plastic slip is impeded across grain boundaries and this contributes to the anisotropy of the overall mechanical response. A simplified (Taylor-type) crystal plasticity model is proposed that accounts for such effect of grain shape on the slip system selection. Assuming that dislocation density gradients are normal to the grain boundaries, backstresses developed at the onset of plasticity are estimated based on two definitions of the effective grain boundary spacing ‘‘seen’’ by individual slip systems. The first one reduces to the mean area-to-perimeter ratio of cross-sections of the grain cut parallel to the slip plane. Closed-form expressions of the average backstresses developed inside grains with spheroidal shapes are introduced in the crystal hardening law. The model reproduces the very high plastic anisotropy of electro-deposited pure iron with a strong c-fiber and a refined columnar grain structure [Yoshinaga, N., Sugiura, N., Hiwatashi, S., Ushioda, K., Kada, O., 2008. Deep drawability of electro-deposited pure iron having an extremely sharp h111i//ND texture. ISIJ Int. 48, 667–670]. It also provides valid estimates of the texture development and the influence of grain size on the yield strength.

A microfluidics device to monitor platelet aggregation dynamics in response to strain rate micro-gradients in flowing blood

This paper reports the development of a platform technology for measuring platelet function and aggregation based on localized strain rate micro-gradients. Recent experimental findings within our laboratories have identified a key role for strain rate micro-gradients in focally triggering initial recruitment and subsequent aggregation of discoid platelets at sites of blood vessel injury. We present the design justification, hydrodynamic characterization and experimental validation of a microfluidic device incorporating contraction–expansion geometries that generate strain rate conditions mimicking the effects of pathological changes in blood vessel geometry. Blood perfusion through this device supports our published findings of both in vivo and in vitro platelet aggregation and confirms a critical requirement for the coupling of blood flow acceleration to downstream deceleration for the initiation and stabilization of platelet aggregation, in the absence of soluble platelet agonists. The microfluidics platform presented will facilitate the detailed analysis of the effects of hemodynamic parameters on the rate and extent of platelet aggregation and will be a useful tool to elucidate the hemodynamic and platelet mechano-transduction mechanisms, underlying this shear-dependent process.

Application of radial return mapping algorithm for finite strain elastoplasticity in a hybrid finite element and particle-in-cell model

The radial return mapping algorithm within the computational context of a hybrid Finite Element and Particle-In-Cell (FE/PIC) method is constructed to allow a fluid flow FE/PIC code to be applied solid mechanic problems with large displacements and large deformations. The FE/PIC method retains the robustness of an Eulerian mesh and enables tracking of material deformation by a set of Lagrangian particles or material points. In the FE/PIC approach the particle velocities are interpolated from nodal velocities and then the particle position is updated using a suitable integration scheme, such as the 4th order Runge-Kutta scheme[1]. The strain increments are obtained from gradients of the nodal velocities at the material point positions, which are then used to evaluate the stress increment and update history variables. To obtain the stress increment from the strain increment, the nonlinear constitutive equations are solved in an incremental iterative integration scheme based on a radial return mapping algorithm[2]. A plane stress extension of a rectangular shape J2 elastoplastic material with isotropic, kinematic and combined hardening is performed as an example and for validation of the enhanced FE/PIC method. It is shown that the method is suitable for analysis of problems in crystal plasticity and metal forming. The method is specifically suitable for simulation of neighbouring microstructural phases with different constitutive equations in a multiscale material modelling framework.