Neurocognitive effects of multivitamin supplementation on the steady state visually evoked potential (SSVEP) measure of brain activity in elderly women

OBJECTIVE: Growing evidence suggests that dietary supplementation with selected micronutrients and nutraceuticals may have the potential to improve cognition in older adults. Fewer studies have investigated the effects of these substances on brain activity. METHODS: This study was a randomised, double-blind, placebo-controlled trial, conducted to explore the effects of 16 weeks supplementation with a combined multivitamin, mineral and herbal formula on the steady state visually evoked potential (SSVEP) measure of brain electrical activity. Participants were elderly women aged between 64 and 79 years, with subjective memory complaints. Baseline and post-treatment SSVEP data was obtained for 22 participants in the multivitamin group and 19 in the placebo group. A spatial working memory delayed response task (DRT) was performed during the recording of the SSVEP. RESULTS: The results revealed that when compared to placebo, multivitamin supplementation delayed SSVEP latency during retrieval, interpreted as an increase in inhibitory neural processes. Behavioural performance on the DRT was not improved by the multivitamin, however improved performance accuracy was associated with increased midline central SSVEP latency. There were no multivitamin-related effects on SSVEP amplitude. CONCLUSION: These findings indicate that in the elderly, multivitamin supplementation may enhance neural efficiency during memory retrieval.

A steady state visually evoked potential investigation of memory and ageing

Old age is generally accompanied by a decline in memory performance. Specifically, neuroimaging and electrophysiological studies have revealed that there are age-related changes in the neural correlates of episodic and working memory. This study investigated age-associated changes in the steady state visually evoked potential (SSVEP) amplitude and latency associated with memory performance. Participants were 15 older (59-67 years) and 14 younger (20-30 years) adults who performed an object working memory (OWM) task and a contextual recognition memory (CRM) task, whilst the SSVEP was recorded from 64 electrode sites. Retention of a single object in the low demand OWM task was characterised by smaller frontal SSVEP amplitude and latency differences in older adults than in younger adults, indicative of an age-associated reduction in neural processes. Recognition of visual images in the more difficult CRM task was accompanied by larger, more sustained SSVEP amplitude and latency decreases over temporal parietal regions in older adults. In contrast, the more transient, frontally mediated pattern of activity demonstrated by younger adults suggests that younger and older adults utilize different neural resources to perform recognition judgements. The results provide support for compensatory processes in the aging brain; at lower task demands, older adults demonstrate reduced neural activity, whereas at greater task demands neural activity is increased.

Stability and convergence analysis of transform-domain LMS adaptive filters with second-order autoregressive process

In this paper, the stability and convergence properties of the class of transform-domain least mean square (LMS) adaptive filters with second-order autoregressive (AR) process are investigated. It is well known that this class of adaptive filters improve convergence property of the standard LMS adaptive filters by applying the fixed data-independent orthogonal transforms and power normalization. However, the convergence performance of this class of adaptive filters can be quite different for various input processes, and it has not been fully explored. In this paper, we first discuss the mean-square stability and steady-state performance of this class of adaptive filters. We then analyze the effects of the transforms and power normalization performed in the various adaptive filters for both first-order and second-order AR processes. We derive the input asymptotic eigenvalue distributions and make comparisons on their convergence performance. Finally, computer simulations on AR process as well as moving-average (MA) process and autoregressive-moving-average (ARMA) process are demonstrated for the support of the analytical results.

Contact pressure and wear in sheet metal forming - an FEM analysis

Wear is the principal cause of tool failure in most sheet metal forming processes. It is well known that the contact pressure between the blank and the tool has a large influence on the wear of the tool, and hence the tool life. This investigation utilises the finite element method to analyse the contact pressure distribution over the die radius for a particular deep drawing process. Furthermore, the evolution of the predicted contact pressure distribution throughout the entire stroke of the punch is also examined. It was found that the majority of the process shows a steady state pressure distribution, with two characteristic peaks over the die radius, at the beginning and end of the sheet contact area. Interestingly, the initial transient contact pressure response showed extremely high localised peak pressures; more than twice that of the steady state peaks. Results are compared to wear reported in the literature, during similar experimental deep drawing processes. Finally, the significance and effect of the results on wear and wear-testing techniques are discussed.

Modeling of contact pressure in sheet metal forming

For a given sheet metal forming process, an accurate determination of the contact pressure distribution experienced is an essential step towards the estimation of tool life. This investigation utilizes finite element (FE) analysis to determine the evolution and distribution of contact pressure over the die radius, throughout the duration of a channel forming process. It was found that a typical two-peak steady-state contact pressure response exists for the majority of the process. However, this was preceded by a transient  response, which produced extremely large and localized contact pressures. Notably, it was found that the peak transient contact pressure was more than double the steady-state peak. These contact pressure results may have a significant influence on the tool wear response and therefore impact current wear testing and prediction techniques. Hence, an investigation into the validity of the predicted contact pressure was conducted.

Contact pressure evolution and its relation to wear in sheet metal forming

For a given sheet metal forming process, an accurate determination of the contact pressure distribution is an essential step towards the estimation of tool life. This investigation utilizes finite element (FE) analysis to model and explain the evolution and distribution of contact pressure over the die radius, throughout the duration of a channel forming process. It was found that a typical two-peak steady-state contact pressure response exists for the majority of the process. However, this was preceded by an initial transient response, characterized by extremely large and localized contact pressures, which were more than double the magnitude of the steady-state peak pressure. The validity of the predicted contact pressure behavior was assessed via detailed numerical analysis and by examining the wear response of an experimental stamping operation. The experimental results revealed that the high contact pressure zones of the transient response corresponded to a severe galling wear mechanism. Therefore, the transient response may be of primary significance to the tool wear response; thus questioning the applicability of traditional bending-under-tension wear tests for sheet metal stamping processes. Finally, a parametric study was conducted, examining the influence of the major process parameters on the steady-state and peak transient contact pressures, using the developed FE model. It was found that the bend ratio and the blank material ultimate tensile strength had the most influence on the peak contact pressures. The main process-related parameters, friction coefficient and blank holder force, were found to have only a minor influence.

Synthesis of ultrafine ceria powders by mechanochemical processing

The synthesis of ultrafine cerium dioxide (CeO₂) powders via mechanochemical reaction and subsequent calcination was studied. Anhydrous CeCl₃ and NaOH powders, along with NaCl diluent, were mechanically milled. A solid-state displacement reaction—CeCl₃+ 3NaOH → Ce(OH)₃+ 3NaCl—was induced during milling in a steady-state manner. Calcination of the as-milled powder in air at 500°C resulted in the formation of CeO₂ nanoparticles in the NaCl matrix. A simple washing process to remove the NaCl yielded CeO₂ particles ∼10 nm in size. The particle size was controlled in the range of ∼10–500 nm by changing the calcination temperature.

The effect of vitamin : a deficiency on glucose uptake in the rat

This thesis describes an investigation of the effects of vitamin A deficiency on gut function, The central hypothesis to be tested was that acute vitamin A deficiency affects glucose uptake from the small intestine- The hypothesis was tested using a system involving perfusion of isolated segments of the small intestine in the anaesthetized rat. The system was used to study effects on glucose uptake under steady-state conditions. In the initial part of the study, experiments were diverted towards setting up the system for measuring steady-state uptake, and determining the relative contributions of active uptake and diffusion. Phenol red was found to be a reliable non-absorbable marker for determining net water movement. Phlorizin, generally at 1 mmol/L, was used as a competitive (reversible) inhibitor of active uptake. It is difficult however to confirm complete inhibition of active uptake by phlorizin because of the limited solubility of the inhibitor. The kinetics of glucose uptake f ram intra-luminal maltose were found to be, in general, not significantly different from those applying to the uptake of glucose from an equivalent glucose solution. Maltase activity in the perfused gut segment was found to be sufficient to hydrolyse most of the maltose (80 per cent or more) in the solution being perfused, a much greater proportion than was absorbed. Glucose absorptive capacity, measured on an intestinal dry weight basis, was greatest in the duodenum and progressively less in the jejunum and ileum. The rate of water uptake f ran the gut was increased by the presence of glucose in the lumen, and was linked to glucose uptake as shown by the inhibition of water uptake by phlorizin. Uptake of glucose by solvent drag was demonstrated by showing an increased rate of glucose uptake when the rate of water uptake was increased by perfusing a solution of reduced osmotic pressure. In the experiment a low intra-luminal glucose concentration was used to preclude net uptake by diffusion and active uptake was blocked with phlorizin. This process was further investigated using streptozotocin-diabetic rats in which the diabetes establishes a hyperosomotic blood with hyperglycaemia. Uptake by solvent drag was more obvious in diabetic animals. A back-diffusion (exsorption) of glucose from the tissues to the lumen was also shown; the rate being proportional to plasma glucose concentration. Vitamin A deficiency was established in weanling rats after 6-7 weeks feeding on a diet based on wheat starch, coconut oil, and casein washed with hot ethanol, together with vitamins and minerals. The vitamin A deficiency led to classic eye signs and was reversed by the addition to the diet of retinoic acid (5 g/g diet). Vitamin A deficiency decreased intestinal mucus production (dry weight) but had no detectable effect on the histology of the villous epithelium as shown under the light microscope. Using perfusion experiments it was shown that vitamin A deficiency had no significant effect on the rate of active uptake of glucose, but that deficiency increased the rate of passive uptake.

Development and application of a microelectrode based scanning voltammetric detector

A large part of the work presented in this thesis describes the development and use of a novel electrochemical detector designed to allow the electrochemical characterisation of compounds in flowing solution by means of cyclic voltammetry. The detector was microprocessor controlled, which provides digital generation of the potential waveform and collection of data for subsequent analysis. Microdisk working electrodes are employed to permit both thermodynamic and kinetically controlled processes to be studied under steady-state conditions in flowing solutions without the distortion or hysteresis normally encountered with larger sized electrodes. The effect of electrode size, potential scan rate, and solution flow rate are studied extensively with the oxidation of ferrocene used as an example of a thermodynamically controlled process and a series of catecholamines as examples of a kinetically controlled process. The performance of the detector was best demonstrated when used as a HPLC post-column detector. The 3-dimensional chromatovoltammograms obtained allow on-line characterisation of each fraction as it elutes from the column. The rest of the work presented in this thesis involves the study of the oxidative degradation pathway of dithranol. The oxidative pathway was shown to involve a complex free radical mechanism, dependent on the presence of both oxygen and, in particular light. The pathway is further complicated by the fact that dithranol may exist in either a keto or enol form, the enol being most susceptible to oxidation. A likely mechanism is proposed from studies performed with cyclic voltammetry and controlled potential electrolysis, then defined by subsequent kinetic studies.

A trilogy on discontinuous innovation. Part I : search

In this article we discuss the concept of Discontinuous Innovation (DI) and how it differs from incremental (or steady-state) innovation. We propose a model to conceptualise the different aspects of DI and discuss the complex nature of the DI process through an investigation of previous literature, and propose a sequence of articles roughly following the key components as described in the conceptual model, beginning with aspects of ‘search’. We then describe an on-going multi-national action research program established to investigate DI through the development of learning networks of firms in several European nations and Australia. The research progress to date is outlined and initial results of analysis on both quantitative and qualitative data collected thus far is used to explore how companies go about searching for clues or ideas about potential discontinuous innovations, which may either create competitive advantage for, or threaten the survival of the business. Key outcomes of the research to date include the identification of the most common search strategies within the participating companies and some descriptive analysis on just how these strategies are implemented in targeted firms. Finally we describe the proposed future research program and the two papers to follow completing the planned three part series on Discontinuous Innovation.

Tool wear in sheet metal stamping

This paper discusses our recent research on wear at the die radius in sheet metal stamping. According to wear theory, contact pressure and sliding distance are the two dominant factors in determining sliding wear. We applied the finite element analysis to accurately quantify the contact pressure and sliding distance at the die radius in sheet metal stamping. The results were then applied to analyze sliding wear at the die radius. We found that a typical two-peak steady-state contact pressure response exists during a channel forming process. The steady-state contact pressure response was preceded by an initial transient response, which produced extremely large and localized contact pressures. We proposed a method to numerically quantify the sliding distance, which was applied to examine the contact sliding distance at the die radius. Correlating the contact pressure and sliding distance, a new insight into the wear/galling that occurs at the die radius in sheet metal stamping was gained. The results show that the region close to zero degrees on the die radius is likely to experience the most wear, with the identified transient stage contributing to a large proportion of the total wear.

Hormonal responses to extreme fasting in subantarctic fur seal (Arctocephalus tropicalis) pups

Surviving prolonged fasting implies closely regulated alterations in fuel provisioning to meet metabolic requirements, while preserving homeostasis. Little is known, however, of the endocrine regulations governing such metabolic adaptations in naturally fasting free-ranging animals. The hormonal responses to natural prolonged fasting and how they correlate to the metabolic adaptations observed, were investigated in subantarctic fur seal (Arctocephalus tropicalis) pups, which, because of the intermittent pattern of maternal attendance, repeatedly endure exceptionally long fasting episodes throughout their development (1–3 mo). Phase I fasting was characterized by a dramatic decrease in plasma insulin, glucagon, leptin, and total L-thyroxine (T4) associated with reductions in mass-specific resting metabolic rate (RMR), plasma triglycerides, glycerol, and urea-to-creatine ratio, while nonesterified fatty acids (NEFA) and β-OHB increased. In contrast, the metabolic steady-state of phase II fasting reached within 6 days was associated with minimal concentrations of insulin, glucagon, and leptin; unchanged cortisol and triiodothyronine (T3); and moderately increased T4. The early fall in insulin and leptin may mediate the shift to the strategy of energy conservation, protein sparing, and primary reliance on body lipids observed in response to the cessation of feeding. In contrast to the typical mammalian starvation response, nonelevated cortisol and minimal glucagon levels may contribute to body protein preservation and downregulation of catabolic pathways, in general. Furthermore, thyroid hormones may be involved in a process of energy conservation, independent of pups' nutritional state. These original hormonal settings might reflect an adaptation to the otariid repeated fasting pattern and emphasize the crucial importance of a tight physiological control over metabolism to survive extreme energetic constraints.

Recommendations for improved data processing from expired gas analysis indirect calorimetry

There is currently no universally recommended and accepted method of data processing within the science of indirect calorimetry for either mixing chamber or breath-by-breath systems of expired gas analysis. Exercise physiologists were first surveyed to determine methods used to process oxygen consumption ([OV0312]O 2) data, and current attitudes to data processing within the science of indirect calorimetry. Breath-by-breath datasets obtained from indirect calorimetry during incremental exercise were then used to demonstrate the consequences of commonly used time, breath and digital filter post-acquisition data processing strategies. Assessment of the variability in breath-by-breath data was determined using multiple regression based on the independent variables ventilation (VE), and the expired gas fractions for oxygen and carbon dioxide, FEO 2 and FECO2, respectively. Based on the results of explanation of variance of the breath-by-breath [OV0312]O2 data, methods of processing to remove variability were proposed for time-averaged, breath-averaged and digital filter applications. Among exercise physiologists, the strategy used to remove the variability in sequential [OV0312]O2 measurements varied widely, and consisted of time averages (30 sec [38%], 60 sec [18%], 20 sec [11%], 15 sec [8%]), a moving average of five to 11 breaths (10%), and the middle five of seven breaths (7%). Most respondents indicated that they used multiple criteria to establish maximum [OV0312]O 2 ([OV0312]O2max) including: the attainment of age-predicted maximum heart rate (HRmax) [53%], respiratory exchange ratio (RER) >1.10 (49%) or RER >1.15 (27%) and a rating of perceived exertion (RPE) of >17, 18 or 19 (20%). The reasons stated for these strategies included their own beliefs (32%), what they were taught (26%), what they read in research articles (22%), tradition (13%) and the influence of their colleagues (7%). The combination of VE, FEO 2 and FECO2 removed 96-98% of [OV0312]O2 breath-by-breath variability in incremental and steady-state exercise [OV0312]O2 data sets, respectively. Correction of residual error in [OV0312]O2 datasets to 10% of the raw variability results from application of a 30-second time average, 15-breath running average, or a 0.04 Hz low cut-off digital filter. Thus, we recommend that once these data processing strategies are used, the peak or maximal value becomes the highest processed datapoint. Exercise physiologists need to agree on, and continually refine through empirical research, a consistent process for analysing data from indirect calorimetry.