Facile preparation and thermoelectric properties of Bi₂Te₃ based alloy nanosheet/PEDOT:PSS composite films

Bi2Te3 based alloy nanosheet (NS)/poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (PEDOT:PSS) composite films were prepared separately by spin coating and drop casting techniques. The drop cast composite film containing 4.10 wt % Bi2Te3 based alloy NSs showed electrical conductivity as high as 1295.21 S/cm, which is higher than that (753.8 S/cm) of a dimethyl sulfoxide doped PEDOT:PSS film prepared under the same condition and that (850-1250 S/cm) of the Bi2Te3 based alloy bulk material. The composite film also showed a very high power factor value, ∼32.26 μWm(-1) K(-2). With the content of Bi2Te3 based alloy NSs increasing from 0 to 4.10 wt %, the electrical conductivity and Seebeck coefficient of the composite films increase simultaneously.

Nano-precipitation : preparation and application in the field of pharmacy

Over the last 30 years, nanoparticle-based medicine has received tremendous attention due to its advances with smart therapeutics and less toxicity. Few nanomedicine products have been approved for commercial use in the clinic (such as Doxil®, Ambraxane®…). Nanomedicine research is still at its early stage and the preparation of nanoparticles must be carefully considered. Systems involving further increased supersaturation, either via solvent evaporation, temperature reduction or anti-solvent mixture, were suggested to be capable of inducing nanoprecipitation (NPT). Since this technique is straight-forward, fast and easy to duplicate in practice, it is highly preferred and recommended. In this review, the process of NTP was described and discussed in detail. Factors that affect the encapsulation efficiency, the nanoparticle size, the morphology and the stability of nanoparticles prepared by NTP were described. This process is one of the most preferable processes for preparing solid nano-protein due to their elegant techniques that preserve the bioactivity of proteins. Although the production of nanoparticles by this process has not been applied in the pharmaceutical industry due to the organic solvent issue, the production equipment for large-scale has been marketed.

Monodisperse aqueous microspheres encapsulating high concentration of l-ascorbic acid: insights of preparation and stability evaluation from straight-through microchannel emulsification

Stabilization of l-ascorbic acid (⌊-AA) is a challenging task for food and pharmaceutical industries. The study was conducted to prepare monodisperse aqueous microspheres containing enhanced concentrations of ⌊-AA by using microchannel emulsification (MCE). The asymmetric straight-through microchannel (MC) array used here constitutes 11 × 104 μm microslots connected to a 10 μm circular microholes. 5-30% (w/w) ⌊-AA was added to a Milli-Q water solution containing 2% (w/w) sodium alginate and 1% (w/w) magnesium sulfate, while the continuous phase constitutes 5% (w/w) tetraglycerol condensed ricinoleate in water-saturated decane. Monodisperse aqueous microspheres with average diameters (dav) of 18.7-20.7 μm and coefficients of variation (CVs) below 6% were successfully prepared via MCE regardless of the ⌊-AA concentrations applied. The collected microspheres were physically stable in terms of their dav and CV for >10 days of storage at 40°C. The aqueous microspheres exhibited ⌊-AA encapsulation efficiency exceeding 70% during the storage.