Estimating cumulative exposure of wildlife to non-lethal disturbance using spatially explicit capture-recapture models

Impact assessments often focus on short-term behavioral responses of animals to human disturbance. However, the cumulative effects caused by repeated behavioral disruptions are of management concern because these effects have the potential to influence individuals' survival and reproduction. We need to estimate individual exposure rates to disturbance to determine cumulative effects. We present a new approach to estimate the spatial exposure of minke whales to whalewatching boats in Faxaflõi Bay, Iceland. We used recent advances in spatially explicit capture-recapture modeling to estimate the probability that whales would encounter a disturbance (i.e., whalewatching boat). We obtained spatially explicit individual encounter histories of individually identifiable animals using photo-identification. We divided the study area into 1-km2 grid cells and considered each cell a spatially distinct sampling unit. We used capture history of individuals to model and estimate spatial encounter probabilities of individual minke whales across the study area, accounting for heterogeneity in sampling effort. We inferred the exposure of individual minke whales to whalewatching vessels throughout the feeding season by estimating individual whale encounters with vessels using the whale encounter probabilities and spatially explicit whalewatching intensity in the same area, obtained from recorded whalewatching vessel tracks. We then estimated the cumulative time whales spent with whalewatching boats to assess the biological significance of whalewatching disturbances. The estimated exposure levels to boats varied considerably between individuals because of both temporal and spatial variations in the activity centers of whales and the whalewatching intensity in the area. However, although some whales were repeatedly exposed to whalewatching boats throughout the feeding season, the estimated cumulative time they spent with boats was very low. Although whalewatching boat interactions caused feeding disruptions for the whales, the estimated low cumulative exposure indicated that the whalewatching industry in its current state likely is not having any long-term negative effects on vital rates.

Spatial prediction of rufous bristlebird habitat in a coastal heathland: a GIS-based approach

1. To develop a conservation management plan for a species, knowledge of its distribution and spatial arrangement of preferred habitat is essential. This is a difficult task, especially when the species of concern is in low   abundance. In south-western Victoria, Australia, populations of the rare rufous bristlebird Dasyornis broadbenti are threatened by fragmentation of suitable habitat. In order to improve the conservation status of this species, critical habitat requirements must be identified and a system of corridors must be established to link known populations. A predictive spatial model of rufous bristlebird habitat was developed in order to identify critical areas requiring preservation, such as corridors for dispersal.
2. Habitat models generated using generalized linear modelling techniques can assist in delineating the specific habitat requirements of a species. Coupled with geographic information system (GIS) technology, these models can be extrapolated to produce maps displaying the spatial configuration of suitable habitat.
3. Models were generated using logistic regression, with bristlebird presence or absence as the dependent variable and landscape variables, extracted from both GIS data layers and multispectral digital imagery, as the predictors. A multimodel inference approach based on Akaike’s information criterion was used and the resulting model was applied in a GIS to extrapolate predicted likelihood of occurrence across the entire area of concern. The predictive performance of the selected model was evaluated using the receiver operating characteristic (ROC) technique. A hierarchical partitioning protocol was used to identify the predictor variables most likely to influence variation in the dependent variable. Probability of species presence was used as an index of habitat suitability.
4. Negative associations between rufous bristlebird presence and  increasing elevation, 'distance to cree', 'distance to coast' and sun index were evident, suggesting a preference for areas relatively low in altitude, in close proximity to the coastal fringe and drainage lines, and receiving less direct sunlight. A positive association with increasing habitat complexity also suggested that this species prefers areas containing high vertical density of vegetation.
5. The predictive performance of the selected model was shown to be high (area under the curve 0·97), indicating a good fit of the model to the data. Hierarchical partitioning analysis showed that all the variables considered had significant  independent contributions towards explaining the variation in the dependent variable. The proportion of the total study area that was predicted as suitable habitat for the rufous bristlebird (using probability of occurrence at a ≥0·5 level ) was 16%.
6. Synthesis and applications. The spatial model clearly delineated areas predicted as highly suitable rufous bristlebird habitat, with evidence of potential corridors linking coastal and inland populations via gullies. Conservation of this species will depend on management actions that protect the critical habitats identified in the model. A multi-scale  approach to the modelling process is recommended whereby a spatially explicit model is first generated using landscape variables extracted from a GIS, and a second model at site level is developed using fine-scale habitat variables measured on the ground. Where there are constraints on the time and cost involved in measuring finer scale variables, the first step alone can be used for conservation planning.

Modelling habitat suitability of the swamp antechinus (Antechinus minimus maritimus) in the coastal heathlands of southern Victoria, Australia

In recent years, predictive habitat distribution models, derived by combining multivariate statistical analyses with Geographic Information System (GIS) technology, have been recognised for their utility in conservation planning. The size and spatial arrangement of suitable habitat can influence the long-term persistence of some faunal species. In southwestern Victoria, Australia, populations of the rare swamp antechinus (Antechinus minimus maritimus) are threatened by further fragmentation of suitable habitat. In the current study, a spatially explicit habitat suitability model was developed for A. minimus that incorporated a measure of vegetation structure. Models were generated using logistic regression with species presence or absence as the dependent variable and landscape variables, extracted from both GIS data layers and multi-spectral digital imagery, as the predictors. The most parsimonious model, based on the Akaike Information Criterion, was spatially extrapolated in the GIS. Probability of species presence was used as an index of habitat suitability. A negative association between A. minimus presence and both elevation and habitat complexity was evidenced, suggesting a preference for relatively low altitudes and a vegetation structure of low vertical complexity. The predictive performance of the selected model was shown to be high (91%), indicating a good fit of the model to the data. The proportion of the study area predicted as suitable habitat for A. minimus (Probability of occurrence greater-or-equal, slanted0.5) was 11.7%. Habitat suitability maps not only provide baseline information about the spatial arrangement of potentially suitable habitat for a species, but they also help to refine the search for other populations, making them an important conservation tool.

Predictive distribution models and their application in wildlife conservation

Wildlife managers are often faced with the difficult task of determining the distribution of species, and their preferred habitats, at large spatial scales. This task is even more challenging when the species of concern is in low abundance and/or the terrain is largely inaccessible. Spatially explicit distribution models, derived from multivariate statistical analyses and implemented in a geographic information system (GIS), can be used to predict the distributions of species and their habitats, thus making them a useful conservation tool. We present two such models: one for a dasyurid, the Swamp Antechinus (Antechinus minimus), and the other for a ground-dwelling bird, the Rufous Bristlebird (Dasyornis broadbenti), both of which are rare species occurring in the coastal heathlands of south-western Victoria. Models were generated using generalized linear modelling (GLM) techniques with species presence or absence as the independent variable and a series of landscape variables derived from GIS layers and high-resolution imagery as the predictors. The most parsimonious model, based on the Akaike Information Criterion, for each species then was extrapolated spatially in a GIS. Probability of species presence was used as an index of habitat suitability. Because habitat fragmentation is thought to be one of the major threats to these species, an assessment of the spatial distribution of suitable habitat across the landscape is vital in prescribing management actions to prevent further habitat fragmentation.

A simple parametric method for reducing sample sizes in gut passage time trials

Seed dispersal is now regularly analyzed using spatially explicit models, relying in part on frugivore gut passage times to produce model outputs. In determining species-specific gut passage times, there is a trade-off in sample size between minimizing collection effort and maintaining statistical reliability. Here we demonstrate that a two-parameter lognormal parametric distribution reliably fits empirical gut passage time distributions and is easily parameterized using relatively small data sets of approximately 30 defecations. We suggest this approach as a statistically reliable substitute for larger empirical gut passage data sets in seed dispersal modeling, and also as a way of using published gut passage data sets to parameterize new models.

Habitat suitability for marine fishes using presence-only modelling and multibeam sonar

Improved access to multibeam sonar and underwater video technology is enabling scientists to use spatially-explicit, predictive modelling to improve our understanding of marine ecosystems. With the growing number of modelling approaches available, knowledge of the relative performance of different models in the marine environment is required. Habitat suitability of 5 demersal fish taxa in Discovery Bay, south-east Australia, were modelled using 10 presence-only algorithms: BIOCLIM, DOMAIN, ENFA (distance geometric mean [GM], distance harmonic mean [HM], median [M], area-adjusted median [Ma], median + extremum [Me], area-adjusted median + extremum [Mae] and minimum distance [Min]), and MAXENT. Model performance was assessed using kappa and area under curve (AUC) of the receiver operator characteristic. The influence of spatial range (area of occupancy) and environmental niches (marginality and tolerance) on modelling performance were also tested. MAXENT generally performed best, followed by ENFA-GM and -HM, DOMAIN, BIOCLIM, ENFA-M, -Min, -Ma, -Mae and -Me algorithms. Fish with clearly definable niches (i.e. high marginality) were most accurately modelled. Generally, Euclidean distance to nearest reef, HSI-b (backscatter), rugosity and maximum curvature were the most important variables in determining suitable habitat for the 5 demersal fish taxa investigated. This comparative study encourages ongoing use of presence-only approaches, particularly MAXENT, in modelling suitable habitat for demersal marine fishes.

Intake rates, stochasticity, or onset of spring : what aspects of food availability affect spring migration patterns in Pink-footed Geese Anser brachyrhynchus?

Long-distance bird migration consists of several flight episodes interrupted by a series of resting and refuelling periods on stopover sites. We assessed the role of food availability as the determinant of staging decisions focusing on the following three aspects of food availability: intake rates, stochasticity in intake rates and onset of spring. Using stochastic dynamic modelling, we investigated their impact on staging times and expected fitness. Subsequently, we compared relations in the use of the stopover sites as predicted by the model with empirical data of the Svalbard-breeding population of Pink-footed Goose Anser brachyrhynchus collected in the period 1990–2002. Our results indicate that, for the case of Pink-footed Geese, spring phenology determines a major part of the migration schedule. In contrast to our expectations, intake rates were generally only of minor importance; however, when approaching the breeding grounds their significance increased. Expected fitness at arrival on the breeding grounds showed that the geese can compensate for changes in a broad range of food availability and also cope with varying degrees of stochasticity. However, declining intake rates at the last stopover site or very late onsets of spring clearly decreased fitness. As predicted by the model, the use of stopover sites was interdependent – from empirical data we derived negative relationships between the staging durations of subsequent sites. These results lend credit to an integrated spatially explicit approach focussing on multiple stopover site characteristics when attempting to improve our understanding of bird migration.

Comparing towed and baited underwater video techniques for assessing temperate marine fishes

Accurate estimates of fish species occurrence are important to any species’ assessments and distribution model. With increasing emphasis on nondestructive sampling, underwater video techniques are commonly used without a thorough understanding of their advantages and disadvantages. This study compared data collected from baited remote underwater stereo-video systems (stereo BRUVS) and towed-video systems to determine; (1) the differences between these video techniques in terms of fish assemblages, functional groups (i.e. pelagic carnivore, epibenthic carnivore/omnivore or herbivore) and observability (i.e. conspicuous or cryptic), and (2) what impact do these two techniques have on the interpretation of spatially-explicit, predictive models. We found stereo BRUVS and towedvideo techniques recorded very different assemblages, functional groups and observability categories across structurally complex benthic biological habitats (i.e. macroalgae dominated habitats). However, as the habitat complexity became less (e.g. seagrass and areas with no visible macro-biota) both techniques appeared to provide similar fish assemblage information. We also found considerable differences in the predicted extents of habitat suitability between the two video techniques.

Are we predicting the actual or apparent distribution of temperate marine fishes?

Planning for resilience is the focus of many marine conservation programs and initiatives. These efforts aim to inform conservation strategies for marine regions to ensure they have inbuilt capacity to retain biological diversity and ecological function in the face of global environmental change – particularly changes in climate and resource exploitation. In the absence of direct biological and ecological information for many marine species, scientists are increasingly using spatially-explicit, predictive-modeling approaches. Through the improved access to multibeam sonar and underwater video technology these models provide spatial predictions of the most suitable regions for an organism at resolutions previously not possible. However, sensible-looking, well-performing models can provide very different predictions of distribution depending on which occurrence dataset is used. To examine this, we construct species distribution models for nine temperate marine sedentary fishes for a 25.7 km2 study region off the coast of southeastern Australia. We use generalized linear model (GLM), generalized additive model (GAM) and maximum entropy (MAXENT) to build models based on co-located occurrence datasets derived from two underwater video methods (i.e. baited and towed video) and fine-scale multibeam sonar based seafloor habitat variables. Overall, this study found that the choice of modeling approach did not considerably influence the prediction of distributions based on the same occurrence dataset. However, greater dissimilarity between model predictions was observed across the nine fish taxa when the two occurrence datasets were compared (relative to models based on the same dataset). Based on these results it is difficult to draw any general trends in regards to which video method provides more reliable occurrence datasets. Nonetheless, we suggest predictions reflecting the species apparent distribution (i.e. a combination of species distribution and the probability of detecting it). Consequently, we also encourage researchers and marine managers to carefully interpret model predictions.

Predicting avian distributions to evaluate spatiotemporal overlap with locust control operations in eastern Australia.

Locusts and grasshoppers cause considerable economic damage to agriculture worldwide. The Australian Plague Locust Commission uses multiple pesticides to control locusts in eastern Australia. Avian exposure to agricultural pesticides is of conservation concern, especially in the case of rare and threatened species. The aim of this study was to evaluate the probability of pesticide exposure of native avian species during operational locust control based on knowledge of species occurrence in areas and times of application. Using presence-absence data provided by the Birds Australia Atlas for 1998 to 2002, we developed a series of generalized linear models to predict avian occurrences on a monthly basis in 0.5 degrees grid cells for 280 species over 2 million km2 in eastern Australia. We constructed species-specific models relating occupancy patterns to survey date and location, rainfall, and derived habitat preference. Model complexity depended on the number of observations available. Model output was the probability of occurrence for each species at times and locations of past locust control operations within the 5-year study period. Given the high spatiotemporal variability of locust control events, the variability in predicted bird species presence was high, with 108 of the total 280 species being included at least once in the top 20 predicted species for individual space-time events. The models were evaluated using field surveys collected between 2000 and 2005, at sites with and without locust outbreaks. Model strength varied among species. Some species were under- or over-predicted as times and locations of interest typically did not correspond to those in the prediction data set and certain species were likely attracted to locusts as a food source. Field surveys demonstrated the utility of the spatially explicit species lists derived from the models but also identified the presence of a number of previously unanticipated species. These results also emphasize the need for special consideration of rare and threatened species that are poorly predicted by presence-absence models. This modeling exercise was a useful a priori approach in species risk assessments to identify species present at times and locations of locust control applications, and to discover gaps in our knowledge and need for further focused data collection.

Predictive mapping of abalone fishing grounds using remotely-sensed LiDAR and commercial catch data

Defining the geographic extent of suitable fishing grounds at a scale relevant to resource exploitation for commercial benthic species can be problematic. Bathymetric light detection and ranging (LiDAR) systems provide an opportunity to enhance ecosystem-based fisheries management strategies for coastally distributed benthic fisheries. In this study we define the spatial extent of suitable fishing grounds for the blacklip abalone (Haliotis rubra) along 200 linear kilometers of coastal waters for the first time, demonstrating the potential for integration of remotely-sensed data with commercial catch information. Variables representing seafloor structure, generated from airborne bathymetric LiDAR were combined with spatially-explicit fishing event data, to characterize the geographic footprint of the western Victorian abalone fishery, in south-east Australia. A MaxEnt modeling approach determined that bathymetry, rugosity and complexity were the three most important predictors in defining suitable fishing grounds (AUC = 0.89). Suitable fishing grounds predicted by the model showed a good relationship with catch statistics within each sub-zone of the fishery, suggesting that model outputs may be a useful surrogate for potential catch.

Dispersal responses override density effects on genetic diversity during post-disturbance succession.

Dispersal fundamentally influences spatial population dynamics but little is known about dispersal variation in landscapes where spatial heterogeneity is generated predominantly by disturbance and succession. We tested the hypothesis that habitat succession following fire inhibits dispersal, leading to declines over time in genetic diversity in the early successional geckoNephrurus stellatus We combined a landscape genetics field study with a spatially explicit simulation experiment to determine whether successional patterns in genetic diversity were driven by habitat-mediated dispersal or demographic effects (declines in population density leading to genetic drift). Initial increases in genetic structure following fire were likely driven by direct mortality and rapid population expansion. Subsequent habitat succession increased resistance to gene flow and decreased dispersal and genetic diversity inN. stellatus Simulated changes in population density alone did not reproduce these results. Habitat-mediated reductions in dispersal, combined with changes in population density, were essential to drive the field-observed patterns. Our study provides a framework for combining demographic, movement and genetic data with simulations to discover the relative influence of demography and dispersal on patterns of landscape genetic structure. Our results suggest that succession can inhibit connectivity among individuals, opening new avenues for understanding how disturbance regimes influence spatial population dynamics.

Ecological fire regimes for the recovery and management of threatened small mammals in southern Australia

The application of fire to fauna management, particularly for endangered species, is a significant issue for wildlife managers. Mammals respond to fire regimes including intensity, frequency and season of occurrence, and changes in fire-regimes are implicated in detrimental effects on mammal communities. For many species temporal habitat change is a key factor affecting the persistence of populations. These species require the option of colonising the shifting habitat mosaic. There is substantial evidence that species such as the native rodents New Holland Mouse (Pseudomys novaehollandiae) and Heath Rat (Pseudomys shortridgei) are early successional species dependent on such temporal habitat changes. In conrast species such as the dasyurid marsupial, Swamp Antechinus (Antechinus minimus) are late successional species, which may take up to 20 years to recolonise. In many situations ecological fire regimes need to be implemented to increase areas of suitable habitat for population expansion and reintroductions. This paper assesses research findings and the development of management actions incorporating ecological fire regimes for the recovery of Pseudomyine rodents and the Swamp Antechinus. Spatially explicit models are required to determine changes and patterns at the landscape level. The prospect of global climate change also is of significance and needs to be assessed.

Where and when to revegetate : a quantitative method for scheduling landscape reconstruction

Restoration of native vegetation is required in many regions of the world, but determining priority locations for revegetation is a complex problem. We consider the problem of determining spatial and temporal priorities for revegetation to maximize habitat for 62 bird species within a heavily cleared agricultural region, 11 000 km2 in area. We show how a reserve-selection framework can be applied to a complex, large-scale restoration-planning problem to account for multi-species objectives and connectivity requirements at a spatial extent and resolution relevant to management. Our approach explicitly accounts for time lags in planting and development of habitat resources, which is intended to avoid future population bottlenecks caused by delayed provision of critical resources, such as tree hollows. We coupled species-specific models of expected habitat quality and fragmentation effects with the dynamics of habitat suitability following replanting to produce species-specific maps for future times. Spatial priorities for restoration were determined by ranking locations (150-m grid cells) by their expected contribution to species habitat through time using the conservation planning tool, ‘‘Zonation.’’ We evaluated solutions by calculating expected trajectories of habitat availability for each species. We produced a spatially explicit revegetation schedule for the region that resulted in a balanced increase in habitat for all species. Priority areas for revegetation generally were clustered around existing vegetation, although not always. Areas on richer soils and with high rainfall were more highly ranked, reflecting their potential to support high-quality habitats that have been disproportionately cleared for agriculture. Accounting for delayed development of habitat resources altered the rank-order of locations in the derived revegetation plan and led to improved expected outcomes for fragmentation-sensitive species. This work demonstrates the potential for systematic restoration planning at large scales that accounts for multiple objectives, which is urgently needed by land and natural resource managers.

A lightwave 3d plug-in for modelling long hair on virtual humans

Multimedia applications today make use of virtual humans. Generating realistic virtual humans is a challenging problem owing to a number of factors, one being the simulation of realistic hair. The difficulty in simulating hair is due to the physical properties of hair. The average human head holds thousands of hairs, with the width of each hair often smaller than the size of a pixel. There are also complex lighting effects that occur within hair. This paper presents a LightWave 3D plug-in for modeling thousands of individual hairs on virtual humans. The plug-in allows the user to specify the length, thickness and distribution of the hair, as well as the number of segments a hair is made up of. The plug-in is able to add hairs to a head model, which the user then modifies to define a hairstyle. The hairs are then multiplied by the plug-in to produce many hairs. By providing a plug-in that does most of the work and produces realistic results, the user is able to produce a hairstyle without modeling each individual strand of hair. This greatly reduces the time spent on hair modeling, and makes the possibility of adding realistic long hair to virtual humans reasonable.