High colonization by native arbuscular mycorrhizal fungi (AMF) of rubber trees in small-holder plantations on low fertility soils in North East Thailand

Rubber tree is a very important crop in Thailand, representing an essential source of income for farmers. In the past two decades, rubber tree plantations have been greatly expanding in unfavorable areas, where climate conditions are difficult and soil fertility is very poor. To optimize latex yields, mineral fertilizers have been widely used. A better understanding of the roles of the biological compartment in soil fertility is essential to determine alternative management practices to sustain soil fertility and optimize latex yields. Arbuscular mycorrhizal fungi (AMF) are widely recognized as beneficial for plants, mainly through their role in improving plant nutrient uptake. The objective of this study was to assess the AMF populations in rubber tree plantations and the impact of both soil characteristics and plantation age on these communities. Our results showed that all rubber trees were highly colonized, regardless of the soil structure and nutrient contents. AMF colonization was not affected by the age of the trees, suggesting that maintaining the symbiosis is likely to be beneficial at all stages. A better understanding and management of the microbial communities would contribute to maintaining or restoring soil fertility, leading to a better tree growth and optimized latex yield.

Climatic, vegetation and edaphic influences on the probability of fire across mediterranean woodlands of south-eastern Australia

 Aim: We investigated how the probability of burning is influenced by the time since fire (TSF) and gradients of climate, soil and vegetation in the fire-prone mediterranean-climate mallee woodlands of south-eastern Australia. This provided insight into the processes controlling contemporary fuel dynamics and fire regimes across biogeographical boundaries, and the consequent effects of climate change on potential shifts in boundaries between fuel systems and fire regimes, at a subcontinental scale. Location: South-eastern Australia. Methods: A desktop-based GIS was used to generate random sampling points across the study region to collect data on intersecting fire interval, rainfall, vegetation and soil type. We used a Bayesian framework to examine the effects of combinations of rainfall, vegetation and soil type on the hazard-of-burning and survival parameters of the Weibull distribution. These analyses identify the nature of environmental controls on the length of fire intervals and the age-dependence of the hazard of burning. Results: Higher rainfall was consistently associated with shorter fire intervals. Within a single level of rainfall, however, the interaction between soil and vegetation type influenced the length of fire intervals. Higher-fertility sands were associated with shorter fire intervals in grass-dominated communities, whereas lower-fertility sands were associated with shorter fire intervals in shrub-dominated communities. The hazard of burning remained largely independent of TSF across the region, only markedly increasing with TSF in shrub-dominated communities at high rainfall. Main conclusions: Rainfall had a dominant influence on fire frequency in the mediterranean-climate mallee woodlands of south-eastern Australia. Predicted changes in the spatial distribution and amount of rainfall therefore have the potential to drive changes in fire regimes, although the effects of soil fertility and rainfall on fire regimes do not align on a simple productivity gradient. Reduced soil fertility may favour plant traits that increase the rate of woody litter fuel accumulation and flammability, which may alter the overriding influence of rainfall gradients on fire regimes.

Determinants of growth of the flammable grass, Triodia scariosa: consequences for fuel dynamics under climate change in the Mediterranean region of South Eastern Australia

Environmental conditions may influence the presence and strength of competitive interactions between different life forms, thereby shaping community composition and structure, and corresponding fuel dynamics. Woodland and shrubland communities of the Mediterranean climate region of South Eastern Australia contain a varied mixture of herbaceous and woody plants. The ratio of herbaceous to woody plants changes along gradients of temperature, moisture and soil fertility. This study aimed to experimentally examine the relative importance of, and interactions between environmental controls (moisture and soil fertility) on the balance of dominant herbaceous (Triodia scariosa) and woody plants (e.g. Acacia ligulata and Leptospermum coriaceum) and their ultimate effects on fuel and fire regimes. The results suggest that environmental determinants of the growth of T. scariosa are likely to be more important than interactions with shrubs in controlling the distribution of T. scariosa. The growth of T. scariosa was consistently higher under hot temperatures and on the less fertile yellow sands, which dominate the south of the region. The results suggest that there is strong potential for the distribution and abundance of T. scariosa to be altered in the future with changes in temperature associated with climate change. The distribution of soil types across the Mediterranean climate region of South Eastern Australia may be predisposed to favour the southerly expansion of T. scariosa-dominated communities in the future under a warmer climate.

Diversity of root-associated arbuscular mycorrhizal fungal communities in a rubber tree plantation chronosequence in Northeast Thailand

Rubber tree (Hevea brasiliensis) is of major economic importance in Southeast Asia and for small land holders in Thailand in particular. Due to the high value of latex, plantations are expanding into unsuitable areas, such as the northeast province of Thailand where soil fertility is very low and therefore appropriate management practices are of primary importance. Arbuscular mycorrhizal fungi (AMF) contribute to plant growth through a range of mechanisms and could play a key role in a more sustainable management of the rubber plantations. We described the diversity of AMF associated with rubber tree roots in Northeast Thailand in relation to tree age and soil parameters along a chronosequence of rubber tree plantations. Cassava fields were included for comparison. Rubber tree and cassava roots harbored high diversity of AMF (111 Virtual Taxa, VT), including 20 novel VT. AMF VT richness per sample was consistently high (per site mean 16 to 21 VT per sample) along the chronosequence and was not related to soil properties. The composition of AMF communities differed between cassava and rubber tree plantations and was influenced by soil texture and nutrient content (sand, K, P, Ca). AMF community composition gradually shifted with the age of the trees. Our results suggest that the high diversity of AMF in this region is potentially significant for maintaining high functionality of AMF communities.

Evaluation of numerical procedures to determine seismic response of structures under influence of soil-structure interaction

In this study, the accuracy and reliability of fully nonlinear method against equivalent linear method for dynamic analysis of soil-structure interaction is investigated comparing the predicted results of both numerical procedures with the results of experimental shaking table tests. An enhanced numerical soil-structure model has been developed which treats the behaviour of the soil and the structure with equal rigour. The soil-structural model comprises a 15 storey structural model resting on a soft soil inside a laminar soil container. The structural model was analysed under three different conditions: (i) fixed base model performing conventional time history dynamic analysis, (ii) flexible base model (considering full soil-structure interaction) conducting equivalent linear dynamic analysis, and (iii) flexible base model performing fully nonlinear dynamic analysis. The results of the above mentioned three cases in terms of lateral storey deflections and inter-storey drifts are determined and compared with the experimental results of shaking table tests. Comparing the experimental results with the numerical analysis predictions, it is noted that equivalent linear method of dynamic analysis underestimates the inelastic seismic response of mid-rise moment resisting building frames resting on soft soils in comparison to the fully nonlinear dynamic analysis method. Thus, inelastic design procedure, using equivalent linear method, cannot adequately guarantee the structural safety for mid-rise building frames resting on soft soils. However, results obtained from the fully nonlinear method of analysis fit the experimental results reasonably well. Therefore, this method is recommended to be used by practicing engineers.

Modelling solute transport in structured soils: performance evaluation of the ADR and TRM models

The movement of chemicals through the soil to the groundwater or discharged to surface waters represents a degradation of these resources. In many cases, serious human and stock health implications are associated with this form of pollution. The chemicals of interest include nutrients, pesticides, salts, and industrial wastes. Recent studies have shown that current models and methods do not adequately describe the leaching of nutrients through soil, often underestimating the risk of groundwater contamination by surface-applied chemicals and overestimating the concentration of resident solutes. This inaccuracy results primarily from ignoring soil structure and nonequilibrium between soil constituents, water, and solutes. A multiple sample percolation system (MSPS), consisting of 25 individual collection wells, was constructed to study the effects of localized soil heterogeneities on the transport of nutrients (NO−3, Cl−, PO3−4) in the vadose zone of an agricultural soil predominantly dominated by clay. Very significant variations in drainage patterns across a small spatial scale were observed (one-way ANOVA, p < 0.001 indicating considerable heterogeneity in water flow patterns and nutrient leaching. Using data collected from the multiple sample percolation experiments, this paper compares the performance of two mathematical models for predicting solute transport, the advective-dispersion model with a reaction term (ADR), and a two-region preferential flow model (TRM) suitable for modelling nonequilibrium transport. These results have implications for modelling solute transport and predicting nutrient loading on a larger scale.

Evaluation of three daily rainfall generation models for SWAT

The Soil and Water Assessment Tool (SWAT) is a hydrologic model that was developed to predict the long-term impacts of land use change on the water balance of large catchments. Stochastic models are used to generate the daily rainfall sequences needed to conduct long-term, continuous simulations with SWAT. The objective of this study was to evaluate the performances of three daily rainfall generation models. The models evaluated were the modified Daily and Monthly Mixed (DMMm) model, skewed normal distribution (SKWD) model and modified exponential distribution (EXPD) model. The study area was the Woady Yaloak River catchment (306 km2) located in southwest Victoria, Australia. The models were assessed on their ability to preserve annual, monthly and daily statistical characteristics of the historical rainfall and runoff. The mean annual, monthly, and daily rainfall was preserved satisfactorily by the models. The DMMm model reproduced the standard deviation of annual and monthly rainfall better than the SKWD and EXPD models. Overall, the DMMm model performed marginally better than the SKWD model at reproducing the statistical characteristics of the historical rainfall record at the various time scales. The performance of the EXPD model was found to be inferior to the performances of the DMMm and SKWD models. The models reproduced the mean annual, monthly, and daily runoff relatively well, although the DMMm and SKWD models were found to preserve these statistics marginally better than the EXPD model. None of the models managed to reproduce the standard deviation of annual, monthly, and daily runoff adequately.

Competitive sorption of intermixed heavy metals in water repellent soil in Southern Australia

In water repellent soil, Cr, Pb and Cu showed higher adsorption intensities than Zn, Cd and Ni did. Soil water repellency is much more widespread than formerly thought. In order to promote fertility and productivity, the irrigation of recycled water onto water repellent soil may be an applied technology to be used in some areas of Southern Australia. Therefore, heavy metals in recycled water potentially enter into the soil. The competitive sorption and retention capacity of heavy metals in soil are important to be determined, especially considering the special geochemical origin of water repellent soil that was caused by waxes on or between the soil particles. Batch equilibrium sorption experiments on Cd, Cr, Cu, Ni, Pb and Zn in their typical proportion in recycled water were conducted in water repellent soil. The sorption intensity, sorption isotherm in the experiments together showed that Cr, Pb and Cu have higher sorption intensity than those of Zn, Ni and Cd in the competitive system. The risk assessment for the application of recycled water onto water repellent soil is definitely necessary, especially for the metal cations with relatively weak sorption.

Heating effects on water repellency in Australian eucalypt forest soils and their value in estimating wildfire soil temperatures

Wildfires can induce or enhance soil water repellency under a range of vegetation communities. According to mainly USA-based laboratory studies, repellency is eliminated at a maximum soil temperature (T) of 280–400°C. Knowledge of T reached during a wildfire is important in evaluating post-fire soil physical properties, fertility and seedbed status. T is, however, notoriously difficult to ascertain retrospectively and often based on indicative observations with a large potential error. Soils under fire-prone Australian eucalypt forests tend to be water repellent when dry or moderately moist even if long unburnt. This study aims to quantify the temperature of water repellency destruction for Australian topsoil material sampled under three sites with contrasting eucalypt cover (Eucalyptus sieberi, E. ovata and E. baxteri). Soil water repellency was present prior to heating in all samples, increased during heating, but was abruptly eliminated at a specific T between 260 and 340°C. Elimination temperature varied somewhat between samples, but was found to be dependent on heating duration, with longest duration resulting in lowest elimination temperature. Results suggest that post-fire water repellency may be used as an aid in hindcasting soil temperature reached during the passage of a fire within repellency-prone environments.