Frequency of shearing increases growth of fibre and changes objective and subjective attributes of Angora goat fleeces

The impact of genotype and of frequency and timing of shearing, on mohair attributes and production of modern Angora goats was studied. Goats in the southern hemisphere grazed pastures between February 2004 and 2006. There were seven shearing treatments by three genetic strains with four or eight replicates of individual goats. Treatments were: three different 6-month shearing intervals and two of 12-month shearing intervals with different months of shearing, a 7-month winter shearing interval and a 3-month shearing interval. Genetic strain was based on sire line: 1·0 South African; 1·0 Texan; and Mixed 0·5 South African and 0·5 Texan. Annual greasy mohair production was 5·08 kg, and average clean fleece production was 4·37 kg. The Angora goats produced an annual clean fleece equivalent to 0·122 of their mean fleece-free live weight which was equal to 0·34 g/kg/day. Measurements were analysed over the period of spring 2004 shearing to spring 2005 shearing, excluding the June–December shearing treatment. Increased frequency of shearing increased fleece growth and affected 13 objective and subjective attributes of mohair that were evaluated including clean washing yield, fibre diameter and fibre diameter variation, incidence of medullated fibres, staple length, fibre curvature, crimp frequency, style, staple definition, staple fibre entanglement and staple tip shape. The direction of these effects were generally favourable and for most attributes the magnitude of the response was linear and commercially important. Each additional shearing resulted in an additional 149 g of clean mohair representing 0·034 of the annual clean mohair production. This increase was associated with a 0·6 cm increase in staple length and 0·32 μm increase in mean fibre diameter. In conclusion, Angora goats shorn less frequently grew less mohair that was more likely to be entangled in spring. Managers of Angora goats should take note of these findings.

Homogeneous isolation of nanocelluloses by controlling the shearing force and pressure in microenvironment

Nanocelluloses were prepared from sugarcane bagasse celluloses by dynamic high pressure microfluidization (DHPM), aiming at achieving a homogeneous isolation through the controlling of shearing force and pressure within a microenvironment. In the DHPM process, the homogeneous cellulose solution passed through chambers at a higher pressure in fewer cycles, compared with the high pressure homogenization (HPH) process. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) demonstrated that entangled network structures of celluloses were well dispersed in the microenvironment, which provided proper shearing forces and pressure to fracture the hydrogen bonds. Gel permeation chromatography (GPC), CP/MAS 13C NMR and Fourier transform infrared spectroscopy (FT-IR) measurements suggested that intra-molecular hydrogen bonds were maintained. These nanocelluloses of smaller particle size, good dispersion and lower thermal stability will have great potential to be applied in electronics devices, electrochemistry, medicine, and package and printing industry. © 2014 Elsevier Ltd.

Development of the sheared edge in the trimming of steel and light metal sheet, part 1 - experimental observations

Trimming experiments were conducted on sheet metals including two drawing steels, an aluminum alloy and a magnesium alloy, using a specially designed die in a mechanical press. The punch-die clearance was varied and data obtained on the rollover and burr height as a function of the clearance. Samples were also partially trimmed to examine crack initiation, the generation of the fracture surface profile and mechanism of burr formation. The results showed that while the burr height and rollover depth generally increased with increasing clearance for all examined materials, there were differences in the fracture surface profile shape, the burr shape, and the mechanism of burr formation, between the two steels and the two light alloys. The major cause of these differences appeared to be the rate of crack propagation through the sheet material.

Development of the sheared edge in the trimming of steel and light metal sheet, part 2 - mechanisms and modelling

The shearing behavior of a drawing-steel and aluminum alloy were investigated using hardness contours of partially deformed samples and a finite element model of the trimming process. Results showed that the stress and strain distributions within the work-piece were more strongly dependent on the punch penetration than the material properties of the work-piece. Differences in the final fracture surface profile and burr formation of the drawing-steel and aluminum alloy were a consequence of the shape of the stress and strain distribution when the crack in the sample became unstable, not when it was initiated. Results and existing literature suggest that a correlation may exist between the strain-rate sensitivity of the work-piece material and the burr mechanism and fracture surface profile of the trimmed part.

Dry your eyes princess : an analysis of gender and 'other' based discources in police organisations

This paper examines the literature relevant to an analysis of gender and discourse in police organisations with a view to testing it through research. Much of the literature on policing can be divided into four key topic areas: the features and construction of police culture; women’s integration into policing; organisational structures and styles of police leadership; and debates about the nature of police work. An examination of the literature has revealed a deficiency of research in discourses within policing and in particular, the impact of discourses on gender and police training. Assumptions underpinning the research project and supported by literature include: formal and informal structures and practices within organisations produce and reproduce gender relations; power, gender relations and masculinity are characteristics of police culture; discourses are products and resources of interactions which establish particular truths; and police organisations have been slow to respond to anti-discrimination legislation and to integrate women into police services. Critical to any analysis of culture, power, gender, discourses, difference, and subjectification is the dynamic and complex nature of culture. Applying Shearing’s and Ericson’s definition of culture as ‘figurative logic’ has resonance in police organisations where symbols, rhetoric and metaphors function as vehicles for discourses.

Current knowledge of the environmental influences on Australian cashmere production and quality

Goat fibre production is affected to a similar extent by genetic and environmental influences. Environmental influences include bio-geophysical factors (photoperiod, climate-herbage system and soil-plant trace nutrient composition), country of origin, nutrition factors (live weight, growth patterns) and management factors (farm, herd age and sex structure). Nutrition and management influences discussed include rate of stocking, energy nutrition, live weight change, parturition and management during shearing. The nutritional variation within and among years is the most important climatic factor influencing cashmere production, fibre diameter and fibre curvature (crimp). With productive cashmere goats, large responses to energy supplementation have been measured with optimum nutritional management. The effects and importance of management and hygiene during fibre harvesting (shearing) in producing quality fibre are emphasised.

Anomalous evaporation behavior of ZnO powder milled mechanically under high-energy conditions

ZnO powder showed anomalous evaporation behavior after its mechanical milling treatment under high-energy conditions. The amount of generated vapor is about 10 times higher in the first 15 min of annealing at 1300 °C than that of unmilled ZnO powders. The strong ball impacts are responsible for the greatly enhanced evaporation ability. Low-energy ball milling involving shearing actions and rare weak impacts leads only to a small evaporation rate enhancement. The possible explanation of the high evaporation rate of the heavily milled material is the existence of large fraction of weakly bonded atoms in grain boundaries, surface defects and strained areas.

Sources of variation in fibre diameter attributes of Australian alpacas and implications for fleece evaluation and animal selection

Sources of variation in fibre diameter attributes of Australian alpacas and implications for fleece evaluation and animal selection were investigated using data collected in the years 1994–97, from 6 properties in southern Australia. Data were analysed using REML (multiple regression analysis) to determine the effect on mean fibre diameter (MFD) and coefficient of variation of MFD (CV(FD)) of age, origin (property), sex (entire male, female), breed (Huacaya, Suri), liveweight, fibre colour, individual, and interactions of these effects. The mean (n = 100) age (range) was 4.2 years (0.1–11.9), liveweight 72.0 kg (12.0–134 kg), MFD 29.1 μm (17.7–46.6 μm), CV(FD) 24.33% (15.0–36.7%).

A number of variables affected MFD and CV(FD). MFD increased to 7.5 years of age, and correlations between MFD at 1.5 and 2 years of age with the MFD at older ages were much higher than correlations at younger ages. Fibre diameter 'blowout' (increase with age) was positively correlated with the actual MFD at ages 2 years and older. There were important effects of farm, and these effects differed with year and shearing age. Suris were coarser than Huacayas with the effect reducing with increased liveweight; there was no effect of sex. Fleeces of light shade were 1 μm finer than dark fleeces. CV(FD) declined rapidly between birth and 2 years of age, reaching a minimum at about 4 years of age and then increasing; however, CV(FD) measurements on young animals were very poor predictors of CV(FD) at older ages, and the response of CV(FD) to age differed with farm and year. Suris had a higher CV(FD) than Huacayas on most properties, and MFD, liveweight, and sex did not affect CV(FD). Fleeces of dark shade had higher CV(FD) than fleeces of light shade in 2 of the years. It is concluded that there are large opportunities to improve the MFD and CV(FD) of alpaca fibre through selection and breeding. The potential benefit is greatest from reducing the MFD and CV(FD) of fibre from older alpacas, through reducing the between-animal variation in MFD and CV(FD). Sampling alpacas at ages <2 years is likely to substantially decrease selection efficiency for lifetime fibre diameter attributes.

Relationship of body condition score, live weight, stocking rate and grazing system to the mortality of Angora goats from hypothermia and their use in the assessment of welfare risks

Body condition scoring is widely used for sheep and cattle but the practice is included in only one Code of Practice for the welfare of goats in Australia. There is no published scientific evidence to support or defend its use in the assessment of welfare risks to farmed goats.

PROCEDURE: The significance of stocking rate, grazing system, body condition score (CS) and live weight were investigated in explaining the risk of mortality of individual and flocks of grazing Angora goats from hypothermia following a severe weather event in April. This event occurred 5 weeks after shearing the goats. Angora goats and Saxon Merino sheep were grazed alone, or mixed together in equal numbers at each of three stocking rates.

RESULTS: There was no mortality amongst Angora goats provided they grazed at the lowest stocking rate even when their CS was < or = 2.0. Mortality in flocks of Angora goats was most related to the CS reached during the preceding 2 months. For flocks of Angora goats there was no mortality at CS > or = 2.5 and mortality increased sharply at mean CS < 2.0. For individual Angora goats, mortality increased as CS declined and stocking rate and grazing combinations were additive in effect on mortality. Grazing with sheep increased mortality of Angora goats at higher stocking rates. The individual goat mortality rate was not dependent on individual plot effects suggesting that these results are applicable widely. Live weight loss was not related to mortality rates of goats once CS had been accounted for.
CONCLUSION: It was concluded that CS and stocking rate were highly significant determinants of welfare risk in Angora goats.

Variation of fibre diameter coefficient of variation and fibre curvature across mohair fleeces: Implications for animal selection, genetic selection and fleece evaluation

The presentwork aimed to determine howthe average fibre diameter coefficient of variation (CVD) and fibre curvature (FC) differences between nine sampling sites vary between sex and flock, to identify differences in variability between sampling sites as a result of between animal and between sire variability and to determine correlations between sampling sites in between animal and between sire variability. Australian Angoras (n = 313) from two farms in southern Australia were sampled at 12 and 18 months of age at nine sites (mid side, belly, brisket, hind flank, hip, hock, mid back, neck, shoulder). Staples were taken prior to shearing at skin level and CVD and FC determined. For each shearing, differences in CVD and FC between sampling sites, how these differences were affected by farm, sex, and sire, and the covariance between sites for sire and individual animal effects were investigated by restricted maximum likelihood (REML) analyses. The median mid side CVD at 12 and 18 months of age ranged from 23.6 to 25.1% but the actual range was 16.8–34.2%. The median mid side FC at 12 and 18 months of age ranged from 14.4 to 18.6◦/mm but the actual range was 10.5–26.3◦/mm. The general pattern for CVDwas for the mid back, hip and neck sites to have similar CVD, the brisket, hind flank and hock sites to have larger CVD and the belly to have smaller CVD than the mid side site. The between animal variation for CVD was lowest at the mid back site. This implies that the mid back would be the most effective site for between animal selection for CVD. Heritabilities for CVD (range at 18 months 0.18–0.30) were only about half the heritabilities for mean fibre diameter in the same study. There was a marked anterior–posterior increase in FC at both farms and with both ages. The results give no clear indication of the best site for between animal selection for FC, other than that the hock should be avoided. Heritabilities for FC are moderate to high (range at 18 months 0.44–0.77) and the genetic correlations are high except for the hock. Thus genetic selection for FC at any site, other than the hock, should be effective for changing FC over the entire fleece. There was more variability between animals than between sites and sires. These results are put into context with associated research on variation in mean fibre diameter and staple length.

Variation of mohair staple length across Angora goat fleeces : implications for animal selection and fleece evaluation

The present study aimed to determine how the average mohair staple length (SL) differences between nine sampling sites vary between sex and flock, to identify differences in SL variability between sampling sites as a result of between-animal and between-sire variability and to determine SL correlations between sampling sites in between-animal and between-sire variability. Australian Angora goats (n=301) from two farms in southern Australia were sampled at 12 and 18 months of age at nine sites (mid side, belly, brisket, hind flank, hip, hock, mid back, neck and shoulder). Staples were taken prior to shearing at skin level and stretched SL determined. For each shearing, differences in SL between sampling sites, how these differences were affected by farm, sex and sire, and the covariance between sites for sire and individual animal effects were investigated by restricted maximum likelihood (REML) analyses. The median mid-side SL at 12 and 18 months of age was 110 and 130 mm, respectively, but the actual range in mid-side SL was 65–165 mm. There was an anterior–posterior decline in SL with the hock being particularly short. There was no evidence that the between-site correlation of the sire effects differed from 1, indicating that genetic selection for SL at one site will be reflected in SL over the whole fleece. However, low heritabilities of SL at the hock, belly and brisket or at any site at 12 months of age were obtained. There was more variability between sites than between sires, but the between-animal variation was greater. The hip and mid-back sites can be recommended for within-flock (culling) and genetic selection for SL due to their low sampling variability, moderate heritability and ease of location.

A review of cashmere nutrition experiments with suggestions for improving their design and conduct

The scientific literature contains divergent views about the effects of nutrition on cashmere. The consequences of ignoring nutrition will be an increase in the number of goats suffering lower production, increased welfare risks and premature mortality. This review evaluated published reports to identify current knowledge and best practice in regard to the design and management of cashmere nutrition experiments. The ability of experiments to distinguish between treatments was evaluated based on their statistical evidence. Many experiments had serious deficiencies in their design, conduct and reporting. Six of 16 papers did not provide statistical information that would enable a reader to verify differences between treatments. For most experiments to detect nutrition affects at P < 0.05, they required a difference between treatments of 0.2–0.8 μm in cashmere mean fibre diameter and 15–42 g in clean cashmere production. Government Research Institutes research was characterised by more experienced authors conducting longer (P < 0.05) and larger (P < 0.05) experiments than those conducted by Universities. Much of the “debate” regarding the affects of nutrition on cashmere production arises from the misinterpretation of both experiments that did not detect statistically significant effects and of experiments that did detect statistically significant effects. Based on a comparison between experiments reporting responses to nutrition with those reporting no response, 13 design and management features were identified that are related to the ability of experiments to detect significant treatment affects. Methods must be adopted to reduce the variance in cashmere production within treatments, by using sufficient animals per treatment, and having replication to provide sufficient degrees of freedom to reduce error terms in analysis. The power of experimental designs should be evaluated before experiments commence. Cashmere production records from a previous full production year could be used as co-variants during statistical analyses but this requires that potential experimental goats are managed in one flock, without variations resulting from different grazing, reproduction or other management for a year prior to an experiment. It is preferable to use more productive and older goats, and goats that are used to handling, and to the conditions and feed to be used. Allocation of animals to treatments must take into account live weight. Nutrition treatments need to be sufficiently different to produce different growth curves. An appropriate control is needed such as live weight maintenance. Evidence of both nutrition intake and growth curves must be published with cashmere production data so the claims made can be verified by the actual responses. As cashmere production is an order of magnitude less than fibre production of Merino sheep or Angora goats and is more difficult to measure, the requirements for measurement, sampling and testing cashmere fleeces are summarised. The use of mid side cashmere patches to determine cashmere growth and quality is seriously biased and must be avoided, preferably by shearing goats prior to and at the end of experiments. In order to obtain higher fleece growth responses and improve the ability of experiments to detect treatment effects it is preferable to start cashmere growth experiments by midsummer and conduct experiments for at least 4 months. These requirements make it difficult for many university students to plan, undertake and complete long-term cashmere nutrition experiments without considerable management support. It is not possible for experiments to disprove the Null hypothesis regarding the effects of nutrition on cashmere production as they can only report a failure to detect treatment effects. Researchers and journals need to be more rigorous in providing statistical information including: degrees of freedom for error terms, treatment variances, standard error of differences or similar to enable readers to compare treatment effects. Publications that do not provide sufficient statistical information should be disregarded from future discussions. Claims that an experiment shows no responses to nutrition should be subject to rigorous examination using the issues identified in this review.

Fibre production by beef cows

Cattle grow and shed fibre which assists them adapt to seasonal changes in the environment. In the absence of cattle fibre production data for southern Australia, Angus, Hereford, Simmental and Limousin cows and crosses between these breeds grazing perennial pastures at Hamilton, Victoria were sampled in late winter. The fibre-growing area on the sides of cattle was measured, fibre sampled at the mid-side site and the sampling area determined. Fibre was tested for fibre diameter distribution, clean washing yield and fibre length measured. Cows were 3-7 years of age, liveweights were 412-712 kg and the mean fibre-growing area was 2.2 m². This produced an average 682 g of total fibre (range 3461-175 g). The mean fibre diameter of all fibres was 51.7 μm (range 43-62 μm) and 18% of fibres were 36 μm (range 6-39%). The clean washing yield was 92.4% (range 87.4-95.8%). Fibre length averaged 21 mm. Increasing the age, liveweight and condition score of cows and increasing weight of clean fibre were associated with significant increases in mean fibre diameter. Breed of cattle did not affect fibre production (P > 0.1) but did affect mean fibre diameter (P < 0.05). The quantity of fibre production indicates potential for low value textile production. The high level of total fibre production, twice that of an earlier report, and fibre shedding from cattle suggests that white fibre-producing animals such as Merino sheep, Angora and cashmere goats and alpaca should avoid using cattle-handling facilities, particularly in the month before shearing.