Phonology and lexicon in a cross-linguistic perspective : the importance of phonetics – a commentary on Stoel-Gammon's 'relationships between lexical and phonological development in young children'

In her interesting article, Stoel-Gammon (this issue) reviews studies concerning the interactions between lexical and phonological development. While the focus of the review is on vocabulary production from children acquiring American English, she also suggests that cross-linguistic research be undertaken to examine how universal and language-specific properties affect the interaction between lexical and phonological acquisition. In this regard, Stoel-Gammon referred to the study of Bleses et al. (2008) who found differences in receptive vocabulary development across languages, based on norming studies for the Communicative Development Inventories (Fenson, Marchman, Thal, Dale, Reznick & Bates, 2007). Bleses et al. showed that Danish children were slower in the early comprehension of words (and phrases). It was hypothesized that the phonetic structure of Danish may account for the difference in receptive vocabulary skills in this population (Bleses & Basbøll, 2004).

Hippocampal deformation mapping in MRI-negative PET-positive temporal lobe epilepsy

Objectives: To compare hippocampal surface structure, using large deformation high dimensional mapping (HDM-LD), in subjects with temporal lobe epilepsy (TLE) with (HS+ve) and without (HS−ve) hippocampal sclerosis.

Methods: The study included 30 HS−ve subjects matched with 30 HS+ve subjects from the previously reported epilepsy patient cohort. To control for normal right–left asymmetries of hippocampal surface structure, subjects were regrouped based on laterality of onset of epileptic seizures and presence of HS. Gender ratio, age, duration of epilepsy and seizure frequency were calculated for each of the four groups. Final HDM-LD surface maps of the right and left TLE groups were compared to define differences in subregional hippocampal involvement within the groups.

Results: There were no significant differences in comparisons of the left TLE (left HS−ve compared with HS+ve) or right TLE (right HS−ve compared with HS+ve) groups with respect to age, duration of epilepsy or seizure severity scores. HDM-LD maps showed accentuated surface changes over the lateral hippocampal surface, in the region of the Sommer sector, in the hippocampi affected by HS. However, HS−ve hippocampi showed maximal surface changes in a different pattern, and did not involve the region of Sommer sector.

Conclusion: We conclude that differences in segmental volume loss between the HS−ve and HS+ve groups are suggestive that the underlying pathophysiology of hippocampal changes in the two groups is different, and not related to chronic seizure duration or severity.

The effect of osteoporotic vertebral fracture of predicted spinal loads in vivo

he aetiology of osteoporotic vertebral fractures is multi-factorial, and cannot be explained solely by low bone mass. After sustaining an initial vertebral fracture, the risk of subsequent fracture increases greatly. Examination of physiologic loads imposed on vertebral bodies may help to explain a mechanism underlying this fracture cascade. This study tested the hypothesis that model-derived segmental vertebral loading is greater in individuals who have sustained an osteoporotic vertebral fracture compared to those with osteoporosis and no history of fracture. Flexion moments, and compression and shear loads were calculated from T2 to L5 in 12 participants with fractures (66.4 ± 6.4 years, 162.2 ± 5.1 cm, 69.1 ± 11.2 kg) and 19 without fractures (62.9 ± 7.9 years, 158.3 ± 4.4 cm, 59.3 ± 8.9 kg) while standing. Static analysis was used to solve gravitational loads while muscle-derived forces were calculated using a detailed trunk muscle model driven by optimization with a cost function set to minimise muscle fatigue. Least squares regression was used to derive polynomial functions to describe normalised load profiles. Regression co-efficients were compared between groups to examine differences in loading profiles. Loading at the fractured level, and at one level above and below, were also compared between groups. The fracture group had significantly greater normalised compression (p = 0.0008) and shear force (p < 0.0001) profiles and a trend for a greater flexion moment profile. At the level of fracture, a significantly greater flexion moment (p = 0.001) and shear force (p < 0.001) was observed in the fracture group. A greater flexion moment (p = 0.003) and compression force (p = 0.007) one level below the fracture, and a greater flexion moment (p = 0.002) and shear force (p = 0.002) one level above the fracture was observed in the fracture group. The differences observed in multi-level spinal loading between the groups may explain a mechanism for increased risk of subsequent vertebral fractures. Interventions aimed at restoring vertebral morphology or reduce thoracic curvature may assist in normalising spine load profiles.

Priming vs. rhyming : orthographic and phonological representations in the left and right hemispheres

The right cerebral hemisphere has long been argued to lack phonological processing capacity. Recently, however, a sex difference in the cortical representation of phonology has been proposed, suggesting discrete left hemisphere lateralization in males and more distributed, bilateral representation of function in females. To evaluate this hypothesis and shed light on sex differences in the phonological processing capabilities of the left and right hemispheres, we conducted two experiments. Experiment 1 assessed phonological activation implicitly (masked homophone priming), testing 52 (M = 25, F = 27; mean age 19.23 years, SD 1.64 years) strongly right-handed participants. Experiment 2 subsequently assessed the explicit recruitment of phonology (rhyme judgement), testing 50 (M = 25, F = 25; mean age 19.67 years, SD 2.05 years) strongly right-handed participants. In both experiments the orthographic overlap between stimulus pairs was strictly controlled using DICE [Brew, C., & McKelvie, D. (1996). Word-pair extraction for lexicography. In K. Oflazer & H. Somers (Eds.), Proceedings of the second international conference on new methods in language processing (pp. 45–55). Ankara: VCH], such that pairs shared (a) high orthographic and phonological similarity (e.g., not–KNOT); (b) high orthographic and low phonological similarity (e.g., pint–HINT); (c) low orthographic and high phonological similarity (e.g., use–EWES); or (d) low orthographic and low phonological similarity (e.g., kind–DONE). As anticipated, high orthographic similarity facilitated both left and right hemisphere performance, whereas the left hemisphere showed greater facility when phonological similarity was high. This difference in hemispheric processing of phonological representations was especially pronounced in males, whereas female performance was far less sensitive to visual field of presentation across both implicit and explicit phonological tasks. As such, the findings offer behavioural evidence indicating that though both hemispheres are capable of orthographic analysis, phonological processing is discretely lateralised to the left hemisphere in males, but available in both the left and right hemisphere in females.

Multicentric carpal-tarsal osteolysis with nephropathy treated successfully with cyclosporine A : a case report and literature review

Multicentric carpal-tarsal osteolysis is a rare skeletal disorder characterized by osteolysis of the metacarpal, carpal, and tarsal bones and leading to crippling joint deformities. Progressive nephropathy occurs in more than half the cases. All previously reported series with renal biopsies showed only end-stage renal disease on histological examination because of the late presentation to nephrologists. Accurate diagnosis of the underlying renal pathological state therefore has not been possible. We report the first case in which early and sequential renal biopsies were performed. These show the renal lesion to be focal and segmental glomerulosclerosis, which was treated successfully with cyclosporine A.

Microscopic interactions in nanocomposite electrolytes

Nanocomposite electrolytes of a fully amorphous trifunctional polyether (3PEG) and poly- (methylene ethylene oxide) (PMEO) have been complexed with two lithium salts and nanoparticulate (~20 nm) fillers of TiO2 and Al2O3. Addition of the fillers to the polymer salt complexes shows a significant change in the conformational modes of both polymers, especially the D-LAM region between 200 and 400 cm-1, indicating a reduced segmental flexibility of the chain. These changes are more pronounced with the use of TiO2 than Al2O3. Incorporation of the nanoparticulate fillers to the electrolytes fails to influence the degree of ion association, suggesting that the number of charge carriers available for conduction in both polymers using both LiClO4 and LiCF3SO3 is not the source of any conductivity increase. Addition of the fillers, which was seen to increase the conductivity in PEO-based systems, generally lowers the conductivity in the present PMEO systems, while the addition of TiO2 has little or no effect except in the cases of 3PEG 1.5 and 1.25 mol/kg LiClO4. In this case, 10 wt % TiO2 provides a conductivity increase of half an order of magnitude at approximately 60 °C. We also report for the first time a Raman spectroscopy investigation into the PEO-based nanocomposite electrolytes. The present results are discussed in terms of the electrostatic interactions involving dielectric properties of the fillers, of special interest being the interactions between the polymer and the fillers and between the ionic species and the fillers, when the effect of crystallization can be ignored.

Lithium ion mobility in poly(vinyl alcohol) based polymer electrolytes as determined by 7Li NMR spectroscopy

Solvent-free polymer electrolytes based on poly(vinyl alcohol) (PVA) and LiCF₃SO₃ have shown relatively high conductivities (10⁻⁸-10⁻⁴ S cm⁻¹), with Arrhenius temperature dependence below the differential scanning calorimeter (DSC) glass transition temperature (343 K). This behaviour is in stark contrast to traditional polymer electrolytes in which the conductivity reflects VTF behaviour. ⁷Li nuclear magnetic resonance (NMR) spectroscopy has been employed to develop a better understanding of the conduction mechanism. Variable temperature NMR has indicated that, unlike traditional polymer electrolytes where the linewidth reaches a rigid lattice limit near T_g, the lithium linewidths show an exponential decrease with increasing temperature between 260 and 360 K. The rigid lattice limit appears to be below 260 K. Consequently, the mechanism for ion conduction appears to be decoupled from the main segmental motions of the PVA. Possible mechanisms include ion hopping, proton conduction or ionic motion assisted by secondary polymer relaxations.

13 C NMR spin–lattice relaxation times as a probeof local polymer dynamics in plasticized polyethers

¹³C NMR spin–lattice relaxation times T₁ are used to investigate the effect of low molecular weight diluents, including N,N-dimethylformamide, N-methylformamide, propylene carbonate, γ-butyrolactone, triglyme and tetraglyme, on the local polymer segmental motion in polyether–urethane networks. In all cases, an increase in the local mobility is deduced from the increasing T₁ measurements consistent with a decreasing glass transition temperature. The extent of plasticization, however, is dependent on the nature of the small molecules. Those molecules which can either form strong polymer-diluent interactions (for example through dipolar interactions) or are themselves rigid, give the least enhancement of polymer mobility and the greatest deviation from the Fox equation for T_g. In the presence of alkali metal salts, N,N-dimethylformamide and propylene carbonate are shown to have opposite effects on the local polymer motion, as seen from the T₁ measurements. In both cases, addition of the plasticizers increases the ¹³C T₁ relaxation times for the plasticizer. However, propylene carbonate decreases the polymer ¹³C T₁ whilst N,N-dimethylformamide results in the expected increase in polymer ¹³C T₁.

A 13C NMR study of the role of plasticizers in the conduction mechanism of solid polymer electrolytes

The addition of low molecular weight solvents such as dimethyl formamide (DMF) and propylene carbonate (PC) to urethane crosslinked polyethers results in enhancement of polymer segmental motion, as determined in this work from polymer ¹³C spin lattice relaxation measurements (T₁) and glass transition temperatures. The formation of salt-polyether complexes results in a decrease in T₁, even in the presence of the plasticizer, indicating that the polymer ether molecules are still involved in the alkali metal coordination. In a polymer electrolyte containing 1 mol kg⁻¹ LiClO₄ the addition of DMF and PC have significantly different affects on the polymer mobility, although they both enhance the conductivity. The conductivity enhancement therefore is not solely the result of an increased solvent mobility.

Composition effects in polyetherurethane-based solid polymer electrolytes

Nuclear magnetic resonance spectroscopy (n.m.r.), dynamic mechanical thermal analysis (d.m.t.a.) and AC impedance techniques have been used in combination to probe the effect of electrolyte composition in an archetypal solid polymer electrolyte (SPE). A series of solid polymer electrolytes (SPEs) based on a urethane-crosslinked trifunctional poly(ethylene glycol) polymer host containing dissolved ionic species (LiClO₄ and LiCF₃SO₃) have been studied. D.m.t.a. has established that increasing LiClO₄ concentration causes a decrease in the polymer segmental mobility, owing to the formation of transient crosslinks via cation-polymer interaction. Investigation of the distribution of mechanical/structural relaxation times for the LiClO₄/polymer complex with d.m.t.a. reveals that increasing LiClO₄ concentration causes a slight broadening of the distribution, indicating a more heterogeneous environment. Results of n.m.r. ⁷Li T₁ and T₂ relaxation experiments support the idea that higher salt concentrations encourage ionic aggregation. This is of critical importance in determining the conductivity of the material since it affects the number of charge carriers available. Introduction of the plasticiser tetraglyme into the LiClO₄-based SPEs suppresses the glass transition temperature of the SPE, and causes a significant broadening of the relaxation time distribution (as measured by d.m.t.a.).

Quantifying rubber degradation using NMR

Ageing can lead to the degradation of the tensile properties of natural rubber. The ageing process causes changes in the polymer segmental motion as well as the chemical structure, both of which can be monitored using nuclear magnetic resonance (NMR) spectroscopy. This work demonstrates that NMR can quantify rubber degradation due to ageing, and also that relatively simple NMR equipment can be used. This simpler equipment can be made portable and so could give a simple and fast indication of the condition of rubber in service. The 1H NMR transverse relaxation time, T2, and the 13C NMR spectrum using cross polarization and magic angle spinning (CP MAS) for samples taken at various levels of a degraded natural rubber liner were compared. These experiments showed that, as the level of degradation increased, the 1H NMR transverse relaxation time decreased. The 13C spectra showed considerable peak broadening, indicative of decreased mobility with increased level of degradation as well as the presence of degradation products. Further investigations using lower powered NMR equipment to measure the 1H NMR transverse relaxation times of two different series of natural rubbers were also performed. This work has shown that this simpler method is also sensitive to structural and mechanical property changes in the rubber. This method of monitoring rubber degradation could lead to the non-destructive use of NMR to determine the condition of a part in service.

Design of multiple sequence alignment algorithms on parallel, distributed memory supercomputers

The challenge of comparing two or more genomes that have undergone recombination and substantial amounts of segmental loss and gain has recently been addressed for small numbers of genomes. However, datasets of hundreds of genomes are now common and their sizes will only increase in the future. Multiple sequence alignment of hundreds of genomes remains an intractable problem due to quadratic increases in compute time and memory footprint. To date, most alignment algorithms are designed for commodity clusters without parallelism. Hence, we propose the design of a multiple sequence alignment algorithm on massively parallel, distributed memory supercomputers to enable research into comparative genomics on large data sets. Following the methodology of the sequential progressiveMauve algorithm, we design data structures including sequences and sorted k-mer lists on the IBM Blue Gene/P supercomputer (BG/P). Preliminary results show that we can reduce the memory footprint so that we can potentially align over 250 bacterial genomes on a single BG/P compute node. We verify our results on a dataset of E.coli, Shigella and S.pneumoniae genomes. Our implementation returns results matching those of the original algorithm but in 1/2 the time and with 1/4 the memory footprint for scaffold building. In this study, we have laid the basis for multiple sequence alignment of large-scale datasets on a massively parallel, distributed memory supercomputer, thus enabling comparison of hundreds instead of a few genome sequences within reasonable time.

Anthropometric profiling of elite junior and senior Australian football players

Purpose: Body structure and physical development must be addressed when preparing junior athletes for their first season in a senior competition. The aim of this preliminary study was to measure the extent of the assumption that final year junior Australian Football (AF) athletes are at a physical mismatch to their senior counterparts.

Methods: Twenty-one male participants (17.71 ± 0.27 y) were recruited from one state based elite junior AF competition and forty-one male participants (22.80 ± 4.24 y) were recruited from one club competing in the senior elite Australian Football League (AFL), who were subsequently divided into two groups; professional rookies aged 18-20 y (19.44 ± 0.70 y; n = 18) and professional seniors aged 21+ y (25.43 ± 3.98 y; n = 23). Dual energy X-ray absorptiometry (DEXA) scans of all participants were completed.

Results: Despite being an average 6.0% and 6.1% lighter in total weight and lean mass respectively, no significant difference was found between the elite junior athletes and their professional AFL rookie counterparts. However, significant differences were demonstrated in comparison with the professional AFL senior athletes (P < .01). Both professional AFL groups demonstrated greater than 0.3 kg total bone mineral content (BMC) than the elite junior athletes (P < .01) and significantly greater segmental BMC and bone mineral density (BMD) results (P < .05).

Conclusion: While the results identify the differences in body composition of the elite junior athletes, development in a linear fashion is noted, providing useful information for the creation of age appropriate expectations and training programs.

Characterisation of ion transport in sulfonate based ionomer systems containing lithium and quaternary ammonium cations

Two sulfonated ionomers based on poly(triethylmethyl ammonium 2-acrylamido-2-methyl-1-propane sulfonic acid) (PAMPS) and containing mixtures of Li⁺ and quaternary ammonium cations are characterised. The first system contains Li⁺ and the methyltriethyl ammonium cation (N1222) in a 1:9 molar ratio, and the ⁷Li NMR line widths showed that the Li⁺ ions are mobile in this system below the glass transition temperature (105°C) and are therefore decoupled from the polymer segmental motion. The conductivity in this system was measured as 10^-5 Scm^-1 at 130°C. A second PAMPS system containing Li⁺ and the dimethylbutylmethoxyethyl ammonium cation (N114(2O1)) in a 2:8 molar ratio showed much lower conductivities despite a significantly lower Tg (60°C), possibly due to associations between the Li⁺ and the ether group on the ammonium cation, or between the latter cations and the sulfonate groups.