Baseline assessment of metals and hydrocarbons in the sediments of Lake Mulwala, Australia

An assessment of hydrocarbon and metal/metalloids (arsenic, cadmium, copper, lead, mercury, selenium, zinc) contamination in sediments from Lake Mulwala, Australia, was undertaken. The objectives of the study were: (i) to determine the extent of contamination in the lake sediments, compared to Australian and international sediment quality guidelines, and (ii) to attempt to identify the contaminant sources to the lake. With the exception of a few samples containing elevated levels of arsenic and/or mercury, the levels of all contaminants in the sediment samples taken from the lake were below the 'lower trigger' of the Australian Sediment Quality Guidelines that would warrant further investigation. High molecular weight hydrocarbons (up to 700 mg kg−1) were found in most sediment samples. Non-metric statistical analysis indicated that the contaminant distribution was different in different parts of the lake, with the lowest concentrations generally found at the influent to the lake. No definitive source(s) of contamination could be identified for either metalloids or hydrocarbons.

Use of plastic and textile media in polishing primary treated effluent

The majority of on-site sewage management systems in Australia fail to perform to expectations. About 60% to 80% of on-site systems reportedly fail to produce acceptable effluent quality, and there is an increaed concern about the risks associated with public health and environmental pollution. In Victoria, a large proportion of septic tank installations have been reported to discharge highly polluted waste to drains and streams. Users, often considered by regulators as operators, have to bear the costs of upgrade/replacement of their old systems to meet stringent water quality guidelines. Some of the common problems include clogging of the disposal fields due to solids and organic overloading and surfacing of highly polluted effluent. Large land application area is subsequently required for irrigating the effluent and/or installation of upgraded disposal fields.
This paper investigates the effectiveness of various types of textile and plastic media, in polishing primary tank effluent, downstream from a typical two-compartment septic tank system. Results to date show that high biochemical oxygen demand removal rates are achieved from the textile and plastic media (up to 86% and 83% respectively). At these removal levels, the performance of a combined conventional septic tank system and plastic/textile filters is comparable to that of an advanced aerated wastewater treatment system. This approach, subject to further investigation, could provide a less costly upgrade.

A review of the scope of scientific studies relating indoor environment and student performance

In 2006-7 the Australian government will invest $9.3 billion in state government and nongovernment educational facilities (DEST 20061). One area of particular interest to both government and school designers is maximising this investment through providing students with healthy and
productive indoor learning environments. The lack of post-occupancy evaluations carried out in schools (Lackney 2001) means that designers are reliant on “best practice” indoor environment quality guidelines developed primarily from scientific studies. The problem with scientific evaluation is that often the complexity of the influences upon student performance is simplified in order to gather information, rather than necessarily providing a more holistic and realistic explanation of any improved outcomes. This paper examines the scope of various studies of classroom indoor environment qualities that have thus far contributed to current understanding of their impact on student learning outcomes. The review demonstrates the lack of comprehensive research into the full range of influences on student performance and offers a better understanding of the limitations of knowledge about indoor environment qualities. This information provides valuable input to research development and post-occupancy evaluation that can better integrate the full range of influences upon students of school facilities and test the assumptions made about “best practice”.

Do green and golden bell frogs (Litoria aurea) occupy habitats with fungicidal properties?

The Green and Golden Bell frog Litoria aureo is in major decline in Australia, where its distribution is now confined mainly to the east coast of New South Wales (NSW). Infection by the newly emerged amphibian fungal pathogen Batrachochytrium dendrobatidis has been identified as one of the main threats affecting L. aurea. Surprisingly, some of the sites in NSW sustaining the largest populations of this species are industrial and urban habitats that are often disturbed and polluted, which could protect L. aurea from chytrid infection if pollution had fungicidal capacity.The aim of this study was to characterise the trace metal concentration of several L. aurea breeding sites in the Sydney and IIlawarra regions of NSW and to evaluate the fungicidal efficacy of the main "'ace metals identified. Selected L. aurea sites were sampled throughout the breeding season (September to February) to establish the concentration of trace metals in both surface sediment and waters. Physico-chemical parameters including pH and salinity were also measured. Of the trace metals identified, copper and zinc were consistently elevated across sites. Over 50% of sites exceeded the National Sediment Quality Guideline for both copper and zinc concentration, and over 90% of sites exceeded the National Water Quality Guideline for these metals. Consequently, we evaluated their effect on the growth and survival of a laboratory culture of B. dendrobatidis,These tests were performed in media containing dissolved metal concentrations of 0.02 - 0.65 mgL^-1 Cu and 0.24 - 5.0 mgL^-1 Zn. Growth rates were inferred by total fungal density in liquid culture (based on spectral absorbance measurements), final dry weight, and the density of zoospores in fungal cultures grown for 28 days. Both copper and zinc were found to reduce the growth and proliferation of B. dendrobatidis, but in a non-linear manner. This suggests that L. aurea may be gaining some protection from B. dendrobatidis infection at several of the sites examined.

Deployment of DGT units in marine waters to assess the environmental risk from a deep sea tailings outfall

Measurements of total, filterable and DGT-labile concentrations of nine metals (Al, Cd, Cr, Cu, Fe, Pb, Mn, Ni and Zn) have been made at five sites up to 4.2km from a deep sea tailings outfall operated by Lihir Gold Ltd. at Lihir Island, Papua New Guinea. At each site, pairs of DGT units (one containing a 0.4mm and the other a 0.8mm diffusive gel layer) were deployed at three depths (50–70; 105–130; 135–155m) for 4–7 days. Comparison of predicted water column DGT-labile metal concentrations in field deployments showed the 0.8mm DGT units were relatively enriched in metals, with the effect being greatest closer to the outfall for Pb and Mn and least for Fe, Cr, Ni and Zn. The most likely explanation for this is that in addition to simple ion diffusion, kinetic factors associated with ageing or desorption processes govern release of metals from iron and aluminium oxyhydroxide colloids which diffuse through the gels. The thicker gels have a longer residence time over which metals can be released for adsorption. This model explains why enrichment is most pronounced near the outfall; more distant sites have lower colloid concentrations because of the longer time for coagulation to increase particle sizes to the extent they cannot enter the gels. Total and filterable metal (FM) concentrations were frequently below the limits of detection (LOD) achievable by conventional ICP-AES (1–52gL⁻¹) and this limited their usefulness for assessing environmental risk and for metal speciation determination. Because of its pre-concentration step DGT gave metal concentrations above their LODs and these decreased exponentially with distance from the outfall. Concentrations of DGT–labile metal fell below Australian water quality guidelines for protection of 99% of marine organisms within 0.13km of the outfall for Cd, Cr and Ni and below that for protection of 95% of marine organisms within 0.4, 0.7 and 3.6km for lead, zinc and copper, respectively.

Network modelling for Townsville distribution system

Drinking water quality guidelines are becoming increasingly stringent. To comply with these guidelines and to manage water quality in a distribution system, improved understanding of the movement and fate of drinking water constituents within the system is required. This study illustrates the construction and calibration of an electronic model of the Townsville drinking water distribution system. Being in the tropics, the temperature of the water in the distribution system changes little throughout the year (usually between 20 and 25°C); also, water is supplied to the system from two sources, the location of the blending of these waters is varies with demand.

Sensitivity of Antarctic marine invertebrates and microalgae to metal exposure

Negative impacts from contaminants have occurred in Antarctic marine ecosystems resulting from human activities. To improve risk assessment procedures and develop site-specific environmental quality guidelines and remediation targets, this study successfully developed novel toxicity testing methods to determine the sensitivity of Antarctic marine invertebrate and microalgal species to metals.

Determining the sensitivity of the Antarctic amphipod Orchomenella pinguides to metals using a joint model of survival response to exposure concentration and duration

Developing water quality guidelines for Antarctic marine environments requires understanding the sensitivity of local biota to contaminant exposure. Antarctic invertebrates have shown slower contaminant responses in previous experiments compared to temperate and tropical species in standard toxicity tests. Consequently, test methods which take into account environmental conditions and biological characteristics of cold climate species need to be developed. This study investigated the effects of five metals on the survival of a common Antarctic amphipod, Orchomenella pinguides. Multiple observations assessing mortality to metal exposure were made over the 30 days exposure period. Traditional toxicity tests with quantal data sets are analysed using methods such as maximum likelihood regression (probit analysis) and Spearman–Kärber which treat individual time period endpoints independently. A new statistical model was developed to integrate the time-series concentration–response data obtained in this study. Grouped survival data were modelled using a generalized additive mixed model (GAMM) which incorporates all the data obtained from multiple observation times to derive time integrated point estimates. The sensitivity of the amphipod, O. pinguides, to metals increased with increasing exposure time. Response times varied for different metals with amphipods responding faster to copper than to cadmium, lead or zinc. As indicated by 30 days lethal concentration (LC50) estimates, copper was the most toxic metal (31 µg/L), followed by cadmium (168 µg/L), lead (256 µg/L) and zinc (822 µg/L). Nickel exposure (up to 1.12 mg/L) did not affect amphipod survival. Using longer exposure durations and utilising the GAMM model provides an improved methodology for assessing sensitivities of slow responding Antarctic marine invertebrates to contaminants.

Consensus guidelines for implementation of quality processes to prevent invasive fungal disease and enhanced surveillance measures during hospital building works, 2014

Healthcare-associated fungal outbreaks impose a substantial economic burden on the health system and typically result in high patient morbidity and mortality, particularly in the immunocompromised host. As the population at risk of invasive fungal infection continues to grow due to the increased burden of cancer and related factors, the need for hospitals to employ preventative measures has become increasingly important. These guidelines outline the standard quality processes hospitals need to accommodate into everyday practice and at times of healthcare-associated outbreak, including the role of antifungal stewardship programmes and best practice environmental sampling. Specific recommendations are also provided to help guide the planning and implementation of quality processes and enhanced surveillance before, during and after high-risk activities, such as hospital building works. Areas in which information is still lacking and further research is required are also highlighted.

Compliance to exercise-oncology guidelines in prostate cancer survivors and associations with psychological distress, unmet supportive care needs, and quality of life

Objective The purpose of this study was to determine prevalence of Australian prostate cancer survivors meeting contemporary exercise-oncology guidelines and identify associations with distress, unmet supportive care needs, and quality of life. Methods A population-based cohort of 463 prostate cancer survivors who were on 10.8 months post-curative therapy was assessed for compliance with current exercise guidelines for cancer survivors, motivational readiness for physical activity, psychological distress, unmet supportive care needs, and quality of life. Results Only 57 men (12.3%) reported sufficient exercise levels (150 min of moderate intensity or 75 min of strenuous exercise per week and twice weekly resistance exercise), 186 (40.2%) were insufficiently active, and 220 (47.5%) were inactive. Among inactive men, 99 (45.0%) were in the contemplation or preparation stage of motivation readiness. Inactive men had higher global distress (p=0.01) and Brief Symptom Inventory-Anxiety (p<0.05) than those who were insufficiently active. Total Supportive Care Needs and International Prostate Cancer Symptom scores were higher in inactive than insufficiently and sufficiently active men (p<0.05). Lack of physical activity contributed to poorer quality of life. Conclusions Only a small proportion of Australian prostate cancer survivors met contemporary exercise-oncology recommendations despite increasing recognition of exercise to improve patient outcomes. Strategies are urgently required to increase prostate cancer survivors' participation in aerobic and resistance exercise training.

Land use, water quality and ecological responses in Lake Colac – trends from Australia

Purpose - Recently, Colac Otway Shire in Australia released its management plan for Lake Colac, claiming over-enrichment of the lake with nutrients and degraded water quality. This paper aims to investigate these claims by establishing a correlation between key water and ecological indicators and land uses.

Design/methodology/approach - Examines the correlation between impairment and stressors in Lake Colac. This was achieved by identifying the likely sources of pollutants into Lake Colac; identifying any existing monitoring program; and characterizing the water and sediment inputs. The likely impacts of increased nutrients and sediment levels on indigenous flora and fauna were also examined. The use of meiofauna (very small benthic metazoan animals) was investigated as an indicator of degraded sites. Plankton diversity as a measure of water health was also assessed.

Findings - Water quality in Lake Colac was found to vary both temporally and spatially, and exhibited low attainment against acceptable trigger values/objectives. At current levels the lake can be classified as poorly degraded. Likely sources of pollution were identified to be related to land uses in the catchments. The biota of the lake, investigated at four study sites, yielded a sparse, benthic macrofaunal assemblage that was dominated by oligochaetes. In contrast, an abundant and taxonomically diverse meiofaunal assemblage was noted. Future meiofaunal analyses are likely to resolve suitable biotic indicator species of free-living nematodes in response to land use and waterway threats specified in the study. Originality value - This work will provide a better understanding of integrated environmental systems to enable development of best management practices, thus transforming the way the land and water are used in the future. Following the present work, other key water and ecological indicators (increased dispersion and dominance of biological species) at five additional sites were studied. Alternative management options for the effluent generated at Colac Sewage Treatment Plant and possible ecological effects of each option were also evaluated. More recently, a sediment characterization study was also carried out at sensitive sites representative of locations where build up of sediments and algae outbreaks are reported. This will enable classification of sediment and evaluation of dredging options.