Room-temperature insertion of elemental tellurium into the Cspł-Br and -I bonds of α-bromo-and α-iodopinacolone

Pinacolyltellurium(IV) dihalides, (t-BuCOCH₂)₂TeX₂ (X ) Br (1b), I (1c)) and Ar(t-BuCOCH₂)TeCl₂ (Ar == 1-C₁₀H₇ (Np) (2a), 2,4,6-Me₃C₆H₂ (Mes) (3a)), are readily prepared at room temperature by the oxidative insertion of elemental tellurium into the C_sp³-Br or -I bond of the α-halopinacolone and by the reaction of ArTeCl₃ with the pinacolone t-BuCOCH₃. The bromides Np(t-BuCOCH₂)TeBr₂ (2b) and Mes(t-BuCOCH₂)TeBr₂ (3b) can be prepared by the addition of bromine to the telluride Ar(t-BuCOCH₂)-Te or of α-bromopinacolone to ArTeBr. Variable-temperature ¹H and ¹³C NMR of the separate signals for the o-Me groups in 3a,b indicate a very high barrier to rotation about the Te-C(aryl) bond. Crystal diffraction data for 1c, 2a-c, and 3b show that intramolecular 1,4-Te …O(C) secondary bonding interactions (SBIs) are retained even in the presence of bulky aryl groups and intermolecular Te …X SBIs are subject to electronic population and steric congestion around the Te(IV) center in the solid state.

Effects of low dosage pyrene pollution on biochemical characters of earthworm (Eisenia fetida) in soil

By the method of artificial soil pollution, an exposure experiment with different concentrations of pyrene (0, 60, 120, 240, 480, 960 microg x kg(-1)) was conducted to determine the cytochrome P450 and MDA contents and the glutathione-S-transferase (GST), superoxide dismutase (SOD), peroxidase (POD) and catalase (CAT) activities in earthworm gut after exposure for 1, 3, 7 and 14 days. The results indicated that within the range of test pyrene concentrations, all the biochemical indices tested differed in their sensitivity to pyrene toxicity, among which, P450 content and GST and SOD activities were most sensitive, followed by POD and CAT activities, while MDA content did not show any obvious response. Exposure duration had stronger effects than exposure dosage. In diagnosing the ecotoxicity of soil pollutant, it could be necessary to use a combined multi-time and multi-index diagnostic method to enhance the sensitivity and effectiveness of the indices adopted.

Synthesis and reactivity of para-substituted benzoylmethyltellurium(II and IV) compounds: observation of intermolecular C-H-O hydrogen bonding in the crystal structure of (p-MeOC6H4COCH2)2TeBr2

Bis(p-substituted benzoylmethyl)tellurium dibromides, (p-YC₆H₄COCH₂)₂TeBr₂, (y=H (1a), Me (1b), MeO (1c)) can be prepared
either by direct insertion of elemental Te across CRf-Br bonds (where C_Rf refers to α-carbon of a functionalized organic moiety) or by the oxidative addition of bromine to (p-YC₆H₄COCH₂)₂Te (y = H (2a), Me (2b), MeO (2c)). Bis(p-substituted benzoylmethyl)tellurium dichlorides, (p-YC₆H₄COCH₂)₂TeCh (y = H (3a), Me (3b), MeO (3c)), are prepared by the reaction of the bis(p-substituted benzoylmethyl)tellurides 2a--c with S0₂Cl₂, whereas the corresponding diiodides (p-YC₆H₄COCH₂)₂Teh (y = H
(4a), Me (4b), MeO (4c)) can be obtained by the metathetical reaction of la--c with KI, or alternatively, by the oxidative addition of
iodine to 2a--c. The reaction of 2a--c with allyl bromide affords the diorganotellurium dibrornides la--c, rather than the expected
triorganotelluronium bromides. Compounds 1-4 were characterized by elemental analyses, IR spectroscopy, ¹H, ^l3C and ¹²⁵Te
NMR spectroscopy (solution and solid-state) and in case of Ie also by X-ray crystallography. (p-MeOC₆H₄COCH₂)₂TeBr₂ (1c) provides, a rare example, among organotellurium compounds, of a supramolecular architecture, where C-H-O hydrogen bonds appear to be the non-covalent intermolecular associative force that dominates the crystal packing.

1-Naphthyl- and mesityltellurium(IV,II) derivatives of small bite chelating organic ligands: effect of steric bulk and intramolecular secondary bonding interaction on molecular geometry and supramolecular association

The synthesis and characterization of unsymmetric diorganotellurium compounds containing a sterically demanding I-naphthyl or
mesitylligand and a small bite chelating organic ligand capable of 1,4-Te···N(O) intramolecular interaction is described. The reaction
of ArTeCl₃ (Ar = I-C_lOH₇, Np; 2,4,6-Me₃C₆H_2' Mes) with (SB)HgCI [SB = the Schiff base, 2-(4,4'-N0₂C₆H₄CH=NC₆H₃-Me)] or a methyl ketone (RCOCH₃) afforded the corresponding dichlorides (SB)ArTeCI₂ (Ar = Np, 1Aa; Mes, 1Ba) or (RCOCH₂)ArTeCl₂ (Ar = Np; R = Ph (2Aa), Me (3Aa), Np (4Aa); Ar = Mes, R = Ph (2Ba)). Reduction of 1Aa and 1Ba by Na₂S₂0₅ readily gave the tellurides (SB)ArTe (Ar = Np (1A), Mes, (1B) but that of dichlorides derived from methylketones was complicated due to partial decomposition to tellurium powder and diarylditelluride (Ar₂Te₂), resulting in poor yields of the corresponding tellurides 2A, 2B and 3A. Oxidation of the isolated tellurides with S0₂Cl₂, Br₂ and I₂ yielded the corresponding dihalides. All the synthesized compounds have been characterized with the help of IR, ¹H, ^l3C, and ¹²⁵Te NMR and in the case of 2Aa, and 2Ba by X-ray crystallography. Appearance of only one ¹²⁵Te signal indicated that the unsymmetric derivatives were stable to disproportionation to symmetric species. Intramolecular 1,4-Te· . ·0 secondary bonding interactions (SBIs) are exhibited in the crystal structures of both the tellurium(IV) dichlorides, 2Aa, and 2Ba. Steric repulsion of the mesityl group in the latter dominates over lone pair-bond pair repulsion, resulting in significant widening of the equatorial C-Te-C angle. This appears to be responsible for the lack of Te· . ·CI involved supramolecular associations in the crystal structure of 2Ba.

Structural characterization of rare intramolecularly (1,4-Te· · ·N) bonded diorganotellurides and their monomeric complexes with mercury(II) halides: metal assisted C-H· · ·X (Hg) interactions leading to supramolecular architecture

Monomeric tellurides 4-RC₆H₄(SB)Te [SB = 2-(4,4'-N0₂C₆H₄CH=NC₆H₃-Me); R = H, 1a; Me,1b; OMe, 1c], which incidentally represent the first example of a telluride with 1,4-Te···N intramolecular interaction, have been prepared and characterized by solution and solid-state ¹²⁵Te NMR, ¹³C NMR and X-ray crystallography. Interplay of weak C-H···O and C-H-··π{ interactions in the crystal lattice of 1b and1c are responsible for the formation of supramolecular motifs. These tellurides undergo expected oxidative addition reactions with halogens and interhalogens and also interact coordinatively with mercury(II) halides to give 1:2 complexes, HgX₂[4-RC₆H₄(SB)Te]₂ (X = CI, R = H, 2a; Me, 2b; OMe, 2c and X = Br, R = H, 3a; Me, 3b; and OMe, 3c) with no sign of Te-C bond cleavage, as has been reported for some 1,5-Te·· ·N(O) intramolecularly bonded tellurides. The complexes 2a and 3c are the first structurally characterized monomeric 1:2 adducts of mercury(II) halides with Te ligands. The 1,4-Te···N intramolecular interactions in the solid-state are retained in the complexes highlighting simultaneously the Lewis acid and base character of the Te(lI) atom. Packing of molecules in the crystal lattice of 2a
and 3c reveals that non-covalent C-H· . ·Cl/Br interactions involving metal-bound halogen atoms possess significant directionality and in
combination with coordinative covalent interactions may be of potential use in creating inorganic supramolecular synthons.

Lymphedema after complete axillary node dissection for melanoma: assessment using a new, objective definition

Objectives: The objectives of this study were to define appropriate criteria for assessing the presence of lymphedema, and to report the prevalence and risk factors for development of upper limb lymphedema after level I-III axillary dissection for melanoma.
Summary Background Data: The lack of a consistent and reliable objective definition for lymphedema remains a significant barrier to appreciating its prevalence after axillary dissection for melanoma (or breast carcinoma).
Methods: Lymphedema was assessed in 107 patients (82 male, 25 female) who had previously undergone complete level I-III axillary dissection. Of the 107 patients, 17 had also received postoperative axillary radiotherapy. Arm volume was measured using a water displacement technique. Change in volume of the arm on the side of the dissection was referenced to the volume of the other (control) arm. Volume measurements were corrected for the effect of handedness using corrections derived from a control group. Classification and regression tree (CART) analysis was used to determine a threshold fractional arm volume increase above which volume changes were considered to indicate lymphedema.
Results: Based on the CART analysis results, lymphedema was defined as an increase in arm volume greater than 16% of the volume of the control arm. Using this definition, lymphedema prevalence for patients in the present study was 10% after complete level I-III axillary dissection for melanoma and 53% after additional axillary radiotherapy. Radiotherapy and wound complications were independent risk factors for the development of lymphedema.
Conclusions: A suggested objective definition for arm lymphedema after axillary dissection is an arm volume increase of greater than 16% of the volume of the control arm.

Size matters—strong binding of the terephthalate dianion by thiourea functionalised fused [n]polynorbornane hosts

Remarkably strong binding of the new [5]polynorbornane based host 2b to the terephthalate dianion is based on size complementarity of the preorganised binding cleft with the rigid dicarboxylate guest.

Developing an anion host for lipid A binding and antibacterial activity

New structural amphiphiles 2a and 2b bind the diphosphate lipid A anion and show potential as lead compounds for the development of novel antibacterial agents.

Nitrile functionalized methimazole-based ionic liquids

The alkylation reaction of 2-mercapto-1-methylimidazole 1b with 2-chloroacetonitrile and 2-chloropropionitrile produced S-alkyl methimazole chlorides 2a and 2b which were subjected to anion metathesis with lithium bis(trifluoromethanesulfonyl)amide, LiNTf2, to afford nitrile functionalized methimazole-based room temperature ionic liquids 3a and 3b in 94% and 89% yields, respectively. Ionic liquids 3a and 3b have reasonably wide electrochemical windows. The efficient extraction of Ag+ from aqueous media into 3a and 3b is also reported.