Investigation of compounds causing water repellency in the rhizosphere of sandy soils from a wide range of locations.

Although soils are generally considered to wet readily, some are actually water repellent at the surface and in the rhizosphere. This phenomenon occurs at low to moderate moisture contents and has been reported from soils under a range of vegetation types and from many regions around the globe. Water repellency in soils can have serious environmental implications including reduced seed germination and plant growth as well as irrigation efficiency, accelerated soil erosion, and enhanced leaching of agrochemicals through preferential flow. it has been proposed that water repellency is caused by the accumulation of hydrophobic organic compounds released as root exudates, microbial byproducts or from decomposing organic matter, which are deposited on mineral or aggregate surfaces, or are present as interstitial matter, Few studies to date have attempted to isolate and characterize these compounds and their structure is therefore only poorly understood, These studies have generally focussed on only a single soil or a small range of samples, have not included non-repellent soils as a control and have not always been able to demonstrate that the substances isolated are indeed responsible for repellency formation.

This study reports on the first part (extraction procedures) of a research programme addressing these gaps in current knowledge by investigating a wide range of severely repellent and wettable ‘control’ samples from different countries, and by including assessments of extraction efficiency and ability of extracts to cause repellency. Analytical methods include DRIFT (Diffuse Reflectance Infrared Fourier Transform Spectroscopy) of soils and IR (Infrared) analysis of extracts.

Key findings are that (i) soil sample heating after extraction is valuable in assessing the effectiveness of the extraction procedure, (ii) Soxhlet extraction using isopropanol/ ammonia (70/30 v/v) was the most effective method in extracting hydrophobic compounds, while leaving the ability of extracted compounds to induce water repellency virtually unaffected, (iii) wettable control soils also contain hydrophobic substances capable of inducing water repellency, (iv) the amount of organic compounds extracted was poorly related to sample repellency, indicating that compounds responsible for repellency may only represent a small fraction of the extract, (v) differences in extraction efficiency between different samples indicate that the compounds responsible may differ generically and/or in terms of their bonding to minerals, and (vi) the combination of repellency assessments with DRIFT on soils and JR on extracts used with internal standards has considerable potential to allow quantification of CH bearing organic matter in the soil, the efficiency of extraction processes for its removal, and its significance in causing water repellency in soils.

Short-term heating tests on doped polypyrrole-coated polyester fabrics

Polyethyleneterephtalate–polypyrrole (PET–PPy) textile complexes incorporating different anionic dopants have been heat treated at 60 °C, 80 °C, 105 °C, 125 °C and 150 °C to investigate effects of short-term heating on conductivity and stability. In most cases heat treatments below 80 °C did not significantly change the final resistance of the conducting textiles. Only the anionic dye-dopant Indigo Carmine acted in a heat-stabilizing manner during treatment at 150 °C, while all samples containing other anionic dopant underwent some degradation. A treatment temperature of 125 °C was the most effective for lowering the final resistance, with sulphonic group containing dopants being particularly effective in improving conductivity and stability. A 29% decrease in the final resistance of a PET–PPy/para-toluene-2-sulphonic acid (pTSA) sample was achievable after 900 s at 125 °C.

Constipation and diet in a community sample of older Australians

Objective: To estimate the prevalence of constipation and laxative use in a sample of people 65 years and over and examine relationships between usual diet and constipation.
Design: A mailed survey using validated instruments to measure bowel habit and laxative use with follow-up interviews to collect dietary data.
Subjects and setting: Three hundred and thirty people aged 65 years and over living at home in Melbourne were randomly selected from the electoral roll of a federal electorate.
Statistical analysis: Descriptive statistics, frequencies and two sample t-tests were used.
Results: Seventy-nine people responded to the mailed bowel survey and 61 were interviewed to collect food intake data. The proportion of constipated people was approximately one quarter (n = 18). Laxative use in the previous 12 months was reported by a fifth of respondents and in these subjects one in four was not constipated. Analysis of the dietary data revealed that the average number of cereal and vegetable serves consumed per day was similar to the national average but less than recommended by nutrition bodies although fruit intake met these recommendations. Constipated subjects consumed fewer serves from the cereals food group than those who were not constipated (2.9 and 3.5 serves respectively, P = 0.03).
Conclusion: Constipation and laxative use appears to be as common in older Australians as in similar populations overseas. Low intake of cereal foods may be a contributing factor.

Internal consistency and validity of the Stroke Impact Scale 2.0 (SIS 2.0) and SIS - 16 in an Australian sample

Background and Purpose: The impact of stroke is multidimensional however standard stroke measures do not discriminate well when stroke patients are less physically impaired. The Stroke Impact Scale 2.0 (SIS 2.0) is a multidimensional measure of the impact of stroke but its'' psychometric properties require further testing. The SIS-16 is a measure of physical functioning designed to be more sensitive to differences in physical functioning than current stroke outcome measures but there is only preliminary information detailing its'' reliability and validity. The current study examined the internal consistency and validity of the SIS 2.0 and SIS-16 in an Australian sample of stroke patients. Methods: The SIS 2.0, SIS-16, World Health Organization Bref-Scale (WHOQOL-BREF) and Zung''s Self-Rating Depression Scale (SDS) were completed by 74 stroke patients in rural Victoria, Australia.
Results: The item convergent validity index indicated good item convergence of the SIS-16 and SIS 2.0 domains. The item discriminant validity index had only adequate divergence for most SIS 2.0 domains. Internal consistencies of the SIS-16 and SIS 2.0 domains were acceptable (agr = 0.87–0.95). Correlations between the SIS-16 and SIS 2.0 and the WHOQOL-BREF and SDS supported the convergent and discriminant validity of the SIS-16 and all the dimensions of the SIS 2.0 except lsquoParticipationrsquo which lacked discriminant validity. Conclusions: The SIS 2.0 and SIS-16 had good psychometric properties with support for the internal consistency and validity of both measures.

An investigation into the incidence of obesity and underweight among adults with an intellectual disability in an Australian sample

Reports suggest that 7% to 18% of Australian adults are obese and a further 16% to 55% are overweight. Studies from other countries have indicated that obesity among people with an intellectual disability may be at least, or even more, prevalent. Prevalence rates range from 28% to 59%. The aim of the current study was to investigate the weight distribution of an Australian sample of people with an intellectual disability using Body Mass Index (BMI) to classify males and females, and Kelly and Rimmer's (1987) Percentage of Body Fat (PBF) formula to also classify males. Forty-one females and 52 males with a mild to severe intellectual disability were assessed. The correlation between BMI and PBF for males was r=.89. BMI classifications revealed a higher percentage of females as overweight (41.4%) and obese (36.6%) compared to overweight males (30.8%) and obese males (30.8%). There were more underweight males (7.6%) than females (4.9%). There was no relationship between living environment and weight classifications on the BMI. The PBF formula indicated that 73% of the males were classified as obese. The possibility of misclassification using the BMI and the need for weight interventions are discussed.

Robustness to non-normality of various tests for the one-sample location problem

This paper studies the effect of the normal distribution assumption on the power and size of the sign test, Wilcoxon's signed rank test and the t-test when used in one-sample location problems. Power functions for these tests under various skewness and kurtosis conditions are produced for several sample sizes from simulated data using the g-and-k distribution of MacGillivray and Cannon.

The relationship between child sexual abuse and academic achievement in a sample of adolescent psychiatric inpatients

Objectives:
To examine the relationship between sexual abuse and academic achievement in an adolescent inpatient psychiatric population. Individual factors expected to influence this relationship were measured to explore the way they each interacted with sexual abuse and its relationship to academic achievement.

Method:
Eighty-one adolescent psychiatric inpatients participated in the study (aged 12–18 years: M = 16.0). Participants were administered tests of academic achievement (dependent variable) and intelligence, and completed a number of self-report measures of their experience of different types of maltreatment, their perception of the parenting they received, socio-economic status, substance abuse, and psychopathology.

Results:
Hierarchical regression analysis revealed that intelligence was the main predictor of academic achievement (uniquely explaining 26% of the variance). A number of interaction effects were also significant indicating that intelligence, substance abuse, internalizing behavior problems, externalizing behavior problems all influenced the relationship between sexual abuse and academic achievement.

Calculating minimum sample sizes for taxonomic measurements : examples using Gäumann’s Peronospora Spore Data

Methods are presented for calculating minimum sample sizes necessary to obtain precise estimates of fungal spore dimensions. Using previously published spore-length data sets for Peronospora species, we demonstrate that 41—71 spores need to be measured to estimate the mean length with a reasonable level of statistical precision and resolution. This is further progressed with examples for calculating the minimum number of spore lengths to measure when matching an undetermined specimen to a known species. Although applied only to spore-length data, all described methods can be applied to any morphometric data that satisfy certain statistical assumptions.

Evaluation of fixed sample-size plans for Plutella xylostella (Lepidoptera: Plutellidae) on broccoli crops in Australia

Fixed sample-size plans for monitoring Plutella xylostella (L.) (Lepidoptera: Plutellidae) on broccoli and other Brassica vegetable crops are popular in Australia for their simplicity and ease of application. But the sample sizes used are often small, ≈10–25 plants per crop, and it may be that they fail to provide sufficient information upon which to base pest control decisions. We tested the performance of seven fixed sample-size plans (10, 15, 20, 30, 35, 40, and 45 plants) by resampling a large data set on P. xylostella in commercial broccoli crops. For each sample size, enumerative and presence-absence plans were assessed. The precision of the plans was assessed in terms of the ratio of the standard error to the mean; and at least 45 and 35 samples were necessary for the enumerative and presence-absence plans, respectively, to attain the generally accepted benchmark of ≤0.3. Sample sizes of 10–20 were highly imprecise. We also assessed the consequences of classifications based on action thresholds (ATs) of 0.2 and 0.8 larvae per plant for the enumerative case, and 0.15 and 0.45 proportion of plants of infested for the presence-absence case. Operating characteristic curves and investigations of the frequency of correct decisions suggest improvements in the performance of plans with increased sample size. In both the enumerative and presence-absence cases, the proportion of incorrect decisions was much higher for the lower of the two ATs assessed, and type II errors (i.e., failure to suggest pest control upon the AT is exceeded) generally accounted for the majority of this error. Type II errors are the most significant from a producer’s standpoint. Further consideration is necessary to determine what is an acceptable type II error rate.

Correlates of sexual assault in a sample of male African American crack cocaine users

Although numerous studies have reported an association between substance use and sexual assault, little is known about the impact of sexual assault on male African American crack cocaine users. This study found that from a sample of 137 respondents from Houston, Texas, one-third reported having been sexually assaulted at least once during their lifetime. Respondents who reported sexual assault were using cocaine more often and were more likely to be physically dependent on drugs and to report greater numbers of physical health problems due to their drug use. However, no differences were identified in respect of reported mental health problems, or problems with family, friends or the workplace associated with drug use. The findings suggest further research as to the impact of sexual assault on male crack cocaine users is warranted and that clinical staff working with male substance users require some awareness of the impacts of sexual assault.

Medication compliance and satisfaction with treatment for HIV disease in a sample of African-American crack cocaine smokers

The development of treatment regimes for African-American HIV-infected crack cocaine users has often been based on assumptions about compliance with medication regimes rather than evidence. This study sought to obtain baseline information on the adherence to antiretroviral medications by members of this important risk population in Houston, Texas. It was found that for only 5 of a range of 16 antiviral medications was there a significant correlation between levels of compliance reported by respondents and their beliefs as to how effective these medications are. Medication compliance was also found not to be associated with frequency of crack cocaine use in the month prior to interview. Furthermore, irrespective of both gender and their reported extent of medication compliance, the respondents tended to report positive relationships with their treating physician, with higher levels of satisfaction reported by women. These results suggest that the majority of African-American crack cocaine users are able to comply with HIV treatment regimes, with more than half (53%) claiming full compliance for one or more medications, and a further one third (31%) claiming compliance more than half the time. Moreover, these findings suggest that they will continue to take antiretroviral medications even if they have doubts about the effectiveness of these medications.

Conductive fabrics for heating applications

By coating textiles with electrically conductive organic polymers, we are able to produce functional, intelligent fabrics. These fabrics can be utilised in applications such as gas sensors, actuators, electromagnetic shielding, radar absorption, selected frequency filtering in indoor wireless applications, and heating applications where vital parts of the body can be heated without embedding any wiring through the fabric.

Heat generation in fabrics coated with the conductive polymer polypyrrole was investigated. The fabrics were coated by chemical synthesis methods by oxidizing the pyrrole monomer in the presence of the fabric substrate. Ferric chloride was selected as the oxidizing agent and anthraquinone-2-sulfonic acid (AQSA) sodium salt monohydrate as the dopant.

Conductive fabrics were characterized by resistivity measurements, scanning electron microscopy, thermal imaging, current transmission over a period of time and calculations of power density per unit area. Effects of reaction conditions on the electrical properties and heat generated are presented. Polypyrrole coated fabrics were stable and possessed high electrical conductivity. Resistivity values ranged from 100-500 ohms/square depending on the reaction parameters. When subjected to a constant voltage of 24V, the polypyrrole coated polyester-Lycra® fabric doped with AQSA reached a maximum temperature of 42°C and a power density per unit area of 430 W/m² was achieved.

Computational simulation of heat transfer from alternate heating sources

The alternant heat transfer induced by particle packet and gas bubbles on an object surface in a gas fluidised bed is computationally studied. The particle packet and bubble are modelled by a DPPM (double particle-layer and Porous Medium) model and a hemispherical model, respectively. Different meshing schemes are applied and different mesh sizes are used in meshing particle packet and heated object and a very large geometrical size difference between them was considered. Two parallel solver processes were proposed to perform the simulation of heat transfer for different purposes and implemented with the Fluent CFD package.