New gold nanostructures for sensor applications: a review

Gold based structures such as nanoparticles (NPs) and nanowires (NWs) have widely been used as building blocks for sensing devices in chemistry and biochemistry fields because of their unusual optical, electrical and mechanical properties. This article gives a detailed review of the new properties and fabrication methods for gold nanostructures, especially gold nanowires (GNWs), and recent developments for their use in optical and electrochemical sensing tools, such as surface enhanced Raman spectroscopy (SERS). © 2014 by the authors; licensee MDPI, Basel, Switzerland.

Cyanobacterial nanowires and characterisation of cell-metalloid/metal interactions

Identified and characterized microbial nanowires in three different cyanobacteria and studied their potential role in cell-metalloid/metal interactions

A shape error metric for sheet metal forming and its application to springback

There are many variations within sheet metal forming, some of which are manifest in the final geometry of the formed component. It is important that this geometric variation be quantified and measured for use in a process or quality control system. The contribution of this paper is to propose a novel way of measuring the geometric difference between the desired shape and an actual formed "U" channel. The metric is based upon measuring errors in terms of the significant manufacturing variations. The metric accords with the manually measured errors of the channel set. The shape error metric is then extended to develop a simple empirical, whole-component, springback error measure. The springback error measure combines into one value all the angle springback and side wall curl geometric errors for a single channel. Two trends were observed: combined springback decreases when the blank holder force is increased; and the combined springback marginally decreases when the die radii is increased.

Patterned growth of carbon nanotubes on Si substrates without predeposition of metal catalysts

Aligned carbon nanotubes (CNTs) can be readily synthesized on quartz or silicon-oxide-coated Si substrates using a chemical vapor deposition method, but it is difficult to grow them on pure Si substrates without predeposition of metal catalysts. We report that aligned CNTs were grown by pyrolysis of iron phthalocyanine at 1000 °C on the templates created on Si substrates with simple mechanical scratching. Scanning electron microscopy and x-ray energy spectroscopy analysis revealed that the trenches and patterns created on the surface of Si substrates were preferred nucleation sites for nanotube growth due to a high surface energy, metastable surface structure, and possible capillarity effect. A two-step pyrolysis process maintained Fe as an active catalyst.

Boron carbide nanowires with uniform CNχ coatings

Boron carbide nanowires with uniform carbon nitride coating layers were synthesized on a silicon substrate using a simple thermal process. The structure and morphology of the as-synthesized nanowires were characterized using x-ray diffraction, scanning and transmission electron microscopy and electron energy loss spectroscopy. A correlation between the surface smoothness of the nanowire sidewalls and their lateral sizes has been observed and it is a consequence of the anisotropic formation of the coating layers. A growth mechanism is also proposed for these growth phenomena.

Contact pressure prediction in sheet metal forming using finite element analysis

Tool wear has become a significant issue associated with the forming of high strength sheet steels in the automotive industry. In order to combat this problem, recent research has been devoted to utilizing the contact results obtained from current sheet metal forming software predictions, in order to develop/apply tool wear models or tool material selection criteria for use in the stamping plant. This investigation aims to determine whether a specialized sheet metal forming software package can correctly capture the complex contact conditions that occur during a typical sheet metal stamping process. The contact pressure at the die radius was compared to results obtained using a general-purpose finite element software package, for a simple channel-forming process. Although some qualitative similarities between the two predictions were observed, it was found that significant differences in the magnitude and distribution of the contact pressure exists. The reasons for the discrepancies in results are discussed with respect to the simplifications and assumptions adopted in the finite element model definitions, and with regards to other results available in the literature.

Heavy metal accumulation in soils at three field sites subject to effluent irrigation

Three field sites were chosen to study the environmental assimilative capacity of heavy metals in soil. These sites were the Werribee Farm and the Myome Farm in Australia and Shenyang Zhangshi Irrigation Area in China. The Werribee Farm and the Shenyang Zhangshi Irrigation Area received sewage treatment and application on land for a long time. The Myome farm is an experimental site in which investigations on land application of municipal wastewater on water repellent soils is currently being trailed. Heavy metal contamination, in particular Cr, Cu and Zn, in the Land Filtration soil of Werribee Farm was widespread. More than a century of sewage irrigation has occurred in the Werribee Farm. The temporal distribution pattern of heavy metals (Cd, Cr, Cu, Ni, Pb and Zn) in the soil at this site follow an exponential trend with time and the spatial distribution pattern of accumulation of heavy metals in different paddocks correlates with the number of years of sewage irrigation at that site in the Farm. Extensive sewage irrigation at Shenyang Zhangshi Irrigation Area resulted in significant Cd pollution in soil-plant (rice) system and poses a significant threat to the health of local people. Even after eight years since cessation of sewage irrigation, the bioavailable fractions of Cd in the soil as analyzed by sequential extraction techniques were very high thus illustrating long-term persistence. The simultaneous competitive adsorption of metals in water repellent soils (at Myome Farm in South Australia) was studied. In the competitive situation, Cr, Pb and Cu are the heavy metal cations more strongly adsorbed by the soil, whereas Cd, Ni and Zn are the least adsorbed. The increase in Freundlich adsorption capacity by clay amendment suggested that clayed soils are capable sorption of higher heavy metal loadings compared to the non-clayed water repellent soil, which is more vulnerable to heavy metal inputs. A simple model of environmental assimilative capacity is proposed. The results of comparison of the three field sites shows that the Werribee Farm has a higher environmental assimilative capacity of heavy metals in soil than the soils at Shenyang Zhangshi Irrigation Area and Myome Farm, however heavy metal contamination at Werribee Farm is still a concern. The model of environmental assimilative capacity of heavy metals in soil is an effective tool to assist management of effluent applied land irrigation systems and can be used to better design environmental engineering systems.

One-step synthesis of conducting polymer–noble metal nanoparticle composites using an ionic liquid

Conducting polymers containing incorporated gold or silver nanoparticles have been synthesized using ionic liquid solutions of gold chloride or silver nitrate. Use of the metal salts as the oxidant for monomers such as pyrrole and terthiophene allows the composites to be formed in one simple step, without the need for templates or capping agents. The incorporated metal nanoparticles are clearly visible by TEM, and the composites have been further analyzed by TGA, CV, UV-Vis, Raman, XPS and scanning TEM coupled with EDS analysis. Utilization of an ionic liquid allows the full oxidizing power of the gold chloride to be accessed, resulting in incorporation of metallic gold into the polymers.

Plasma-assisted self-catalytic vapour-liquid-solid growth of β-SiC nanowires

Long and straight β-SiC nanowires are synthesized via the direct current arc discharge method with a mixture of silicon, graphite and silicon dioxide as the precursor. Detailed investigations with x-ray diffraction, scanning electron microscopy, energy dispersive x-ray spectroscopy, Raman scattering spectroscopy, transmission electron microscopy and selected area electron diffraction confirm that the β-SiC nanowires, which are about 100–200 nm in stem diameter and 10–20 µm in length, consist of a solid single-crystalline core along the (1 1 1) direction wrapped with an amorphous SiO_x layer. A broad photoluminescence emission peak with a maximum at about 336 nm is observed at room temperature. A direct current arc plasma-assisted self-catalytic vapour–liquid–solid process is proposed as the growth mechanism of the β-SiC nanowires. This synthesis technique is capable of producing SiC nanowires free of metal contamination with a preferential growth direction and a high aspect ratio, without the designed addition of transition metals as catalysts.

Annihilation electrogenerated chemiluminescence of mixed metal chelates in solution : Modulating emission colour by manipulating the energetics

We demonstrate the mixed annihilation electrogenerated chemiluminescence of tris(2,2′-bipyridine)ruthenium(ii) with various cyclometalated iridium(iii) chelates. Compared to mixed ECL systems comprising organic luminophores, the absence of T-route pathways enables effective predictions of the observed ECL based on simple estimations of the exergonicity of the reactions leading to excited state production. Moreover, the multiple, closely spaced reductions and oxidations of the metal chelates provide the ability to finely tune the energetics and therefore the observed emission colour. Distinct emissions from multiple luminophores in the same solution are observed in numerous systems. The relative intensity of these emissions and the overall emission colour are dependent on the particular oxidized and reduced species selected by the applied electrochemical potentials. Finally, these studies offer insights into the importance of electronic factors in the question of whether the reduced or oxidized partner becomes excited in annihilation ECL. This journal is

Inquisition of Microcystis aeruginosa and Synechocystis nanowires: characterization and modelling

Identification of extracellular conductive pilus-like structures (PLS) i.e. microbial nanowires has spurred great interest among scientists due to their potential applications in the fields of biogeochemistry, bioelectronics, bioremediation etc. Using conductive atomic force microscopy, we identified microbial nanowires in Microcystis aeruginosa PCC 7806 which is an aerobic, photosynthetic microorganism. We also confirmed the earlier finding that Synechocystis sp. PCC 6803 produces microbial nanowires. In contrast to the use of highly instrumented continuous flow reactors for Synechocystis reported earlier, we identified simple and optimum culture conditions which allow increased production of nanowires in both test cyanobacteria. Production of these nanowires in Synechocystis and Microcystis were found to be sensitive to the availability of carbon source and light intensity. These structures seem to be proteinaceous in nature and their diameter was found to be 4.5-7 and 8.5-11 nm in Synechocystis and M. aeruginosa, respectively. Characterization of Synechocystis nanowires by transmission electron microscopy and biochemical techniques confirmed that they are type IV pili (TFP) while nanowires in M. aeruginosa were found to be similar to an unnamed protein (GenBank : CAO90693.1). Modelling studies of the Synechocystis TFP subunit i.e. PilA1 indicated that strategically placed aromatic amino acids may be involved in electron transfer through these nanowires. This study identifies PLS from Microcystis which can act as nanowires and supports the earlier hypothesis that microbial nanowires are widespread in nature and play diverse roles.

Simple and signal-off electrochemical biosensor for mercury(II) based on thymine-mercury-thymine hybridization directly on graphene

Abstract A simple, signal-off and reusable electrochemical biosensor was developed for sensitive and selective detection of mercury(II) based on thymine-mercury(II)-thymine (T-Hg²⁺-T) complex and the remarkable difference in the affinity of graphene with double strand DNA (ds-DNA) and single strand DNA (ss-DNA). Our system was composed of ferrocene-tagged probe DNA and graphene. Due to the noncovalent assembly, the ferrocene-tagged probe ss-DNA was immobilized on the surface of graphene nanosheets directly and employed to amplify the electrochemical signal. In the presence of Hg²⁺, the ferrocene-labeled T-rich DNA probe hybridized with target probe to form ds-DNA via the Hg²⁺-mediated coordination of T-Hg²⁺-T base pairs. As a result, the duplex DNA complex kept away from the graphene surface due to the weak affinity of graphene and ds-DNA, and the redox current decreased substantially. Meanwhile, the graphene decorated GCE surface was released for the reusability. Under the optimal conditions, the proposed sensor showed a linear concentration range from 25 pM to 10 μM with a detection limit of 5 pM for Hg²⁺ detection. The strategy afforded exquisite selectivity for Hg²⁺ against other metal ions in real environmental samples.