Microcapsules with improved shells

Disclosed are microcapsules and methods for preparing and using them, as well as methods for improving various properties of microcapsules like impermeability.

Fracture analysis of spherical shells : application to cracking of macadamia nuts

The main consideration in recovering the macadamia kernal is to crack the spherical nutshell without damaging the kernal. Five mechanical cracking tools were tested, and the fracture mechanisms of nutshells, under various cracking loads, were studied. A classical theoretical approach and a numerical method were both used to investigate the influence of crack face closure on the stress intensity factor for a cracked spherical shell subjected to membrane forces and bending moments.

Effectiveness of recording in primary science : a study of the ability of junior primary school pupils to use drawing as an effective method of communication in science lessons

Drawing as a means of recording is a very common practice in junior primary science lessons. This is largely due to the availability of necessary materials. Also, most youg children have some degree of drawing skill and enjoy drawing activities. Since 1956 the science curriculum to be implemented in primary classrooms in Victoria has changed from one that was based largely on nature study (biological) to one that includes physical and technological aspects. Further, there have been changes in the teaching methodologies advocated for use in science lessons. A modified Interactive Teaching Approach was used for the studies. Drawing was the main means by which the children recorded information. The topic of 'shells' was used to enable collection of data about the children's enjoyment of the activity and satisfaction with their achievement. This study was replicated using the topic 'rocks'; again data were collected concerning satisfaction and enjoyment. During a series of lessons on 'snails' data were collected concerning the achievement of 'process' and 'objective' purposes that teachers might have in mind when setting a drawing activity. In addition to providing data about purposes the study stimulated some questions regarding the techniques the children had used in their drawings. Accordingly, data concerning the use of graphic techniques by the children were collected during a series of lessons on 'oils'. The data collected and analysed in the various studies highlighted the value of drawing in junior primary school science lessons. It also validated strategies developed by the author and designed to help teachers and children use drawing effectively in science activities.

Vegetarian microcapsules

Disclosed are microcapsules with shells that are not animal by-products and methods for preparing and using such microcapsules.

Plane wave scattering by a spherical di-electric particle in motion : a relativistic extension of the Mie theory

Light scattering from small spherical particles has applications in a vast number of disciplines including astrophysics, meteorology optics and particle sizing. Mie theory provides an exact analytical characterization of plane wave scattering from spherical dielectric objects. There exist many variants of the Mie theory where fundamental assumptions of the theory has been relaxed to make generalizations. Notable such extensions are generalized Mie theory where plane waves are replaced by optical beams, scattering from lossy particles, scattering from layered particles or shells and scattering of partially coherent (non-classical) light. However, no work has yet been reported in the literature on modifications required to account for scattering when the particle or the source is in motion relative to each other. This is an important problem where many applications can be found in disciplines involving moving particle size characterization. In this paper we propose a novel approach, using special relativity, to address this problem by extending the standard Mie theory for scattering by a particle in motion with a constant speed, which may be very low, moderate or comparable to the speed of light. The proposed technique involves transforming the scattering problem to a reference frame co-moving with the particle, then applying the Mie theory in that frame and transforming the scattered field back to the reference frame of the observer.

Vector activity and propagule size affect dispersal potential by vertebrates

Many small organisms in various life stages can be transported in the digestive system of larger vertebrates, a process known as endozoochory. Potential dispersal distances of these “propagules” are generally calculated after monitoring retrieval in experiments with resting vector animals. We argue that vectors in natural situations will be actively moving during effective transport rather than resting. We here test for the first time how physical activity of a vector animal might affect its dispersal efficiency. We compared digestive characteristics between swimming, wading (i.e. resting in water) and isolation (i.e. resting in a cage) mallards (Anas platyrhynchos). We fed plastic markers and aquatic gastropods, and monitored retrieval and survival of these propagules in the droppings over 24 h. Over a period of 5 h of swimming, mallards excreted 1.5 times more markers than when wading and 2.3 times more markers than isolation birds, the pattern being reversed over the subsequent period of monitoring where all birds were resting. Retention times of markers were shortened for approximately 1 h for swimming, and 0.5 h for wading birds. Shorter retention times imply higher survival of propagules at increased vector activity. However, digestive intensity measured directly by retrieval of snail shells was not a straightforward function of level of activity. Increased marker size had a negative effect on discharge rate. Our experiment indicates that previous estimates of propagule dispersal distances based on resting animals are overestimated, while propagule survival seems underestimated. These findings have implications for the dispersal of invasive species, meta-population structures and long distance colonization events.

Electrostatic forces induce poly(vinyl alcohol)-protected copper nanoparticles to form copper/poly(vinyl alcohol) nanocables via electrospinning

Copper/poly(vinyl alcohol) (PVA) nanocables have been successfully obtained by electrospinning a PVA-protected copper nanoparticle solution. The molar ratio of copper ions to PVA (in terms of VA repeating units) plays an important role in the formation of copper/PVA nanocables. The average diameter of the copper cores and PVA shells is about 100 and 400 nm, respectively. The structures of the copper/PVA nanocables are characterized by transmission electron microscopy (TEM) and their formation is confirmed by scanning electron microscopy (SEM).

Bearing e.g. connecting rod bearing, mounting method for reciprocating piston engine of motor vehicle, involves fixedly connecting bearing housing parts by welding process, where welding of parts is performed in defined external region

The method involves dividing a bearing housing into bearing housing parts (4A, 4B) by fracture-splitting. Bearing half-shells (5) are inserted into the parts. The parts are combined to a bearing that encloses a shaft, and are fixedly connected with each other by a welding process such as resistance welding, ultrasonic welding or cold pressure welding process. The welding of the parts is performed in a defined external region. An insulation material is applied between the half-shells and/or the shaft and the housing parts before welding. The parts are pressed on each other during welding.

Wild silkworm cocoon as a natural tough biological composite structure

Silk cocoons are biological composites with intriguing characteristics that have evolved through a long natural selection process. Knowledge of structure-property-function relationship of multilayered composite silk cocoon shells gives insight into the design of next-generation protection materials. The current investigation studied the composite structure and mechanical performance of a wild silkworm cocoon (Chinese tussah silkworm cocoon, Antheraea pernyi) in comparison with the domestic counterpart (Mulberry silkworm cocoon, Bombyx mori). 180º peel and tensile tests were performed on the cocoon walls to understand both their interlaminar and in-plane mechanical properties. The fracture surfaces were investigated under SEM. The wild cocoon showed substantially higher toughness over the domestic cocoon, which explains their unique capability to tackle severe environmental adversaries.

Biotemplated fabrication of a novel hierarchical porous C/LiFePO4/C composite for Li-ion batteries

Hierarchical porous composites are a potentially attractive material for high-rate cathode. This work presents a facile sol-gel process for the fabrication of a hierarchical porous C/LiFePO4/bio-C composite by using artemia cyst shells as natural biological carbon templates. The C/LiFePO4/bio-C composite exhibits a superior electrochemical performance with discharge capacities of 105 mA h g-1, 93 mA h g-1 and 80 mA h g-1 at 5 C, 10 C and 20 C, respectively. Remarkably, it produces a high discharge capacity of 69.1 mA h g-1 and no fading after 50 cycles even at a high current density of 6800 mA g-1. This journal is

Lessons from silkworm cocoons for future protective materials design

 Evolved over millions of years’ natural selection, very thin and lightweight wild silkworm cocoons can protect silkworms from environmental hazards and physical attacks from predators while supporting their metabolic activity. The knowledge of structure-property-function relationship of multi-layered composite silk cocoon shells gives insight into the design of next-generation protection materials. The mechanical and thermal insulation properties of both domestic (Bombyx mori, or B. moriand Samia. cynthia, or S. cynthia) and wild (Antheraea pernyi and Antheraea mylitta, or A. pernyi and A. mylitta) silkworm cocoons were investigated. The research findings are of relevance to the bio-inspired design of new protective materials and structures.
The 180 degree peel tests and needle penetration tests were used for examining the peel resistance and needle penetration resistance of both domestic and wild silkworm cocoon walls. The temperatures inside and outside of the whole silkworm cocoons under warm, cold and windy conditions were monitored for investigating the cocoon’s thermal insulation function. Computational fluid dynamics (CFD) models were created to simulate the heat transfer through the A. pernyi cocoon wall.
The wild cocoons experienced much higher peeling peak loads than the domestic cocoon. This transfers to a maximum work-of-fracture (WOF) of about 1000 J/m2 from the A. pernyi outer layer, which was 10 times of the B. mori cocoon. The A. pernyi wild cocoon exhibited a maximum penetration force (11 N) that is 70 % higher than a woven aramid fabric. Silk sericin is shown to play a critical role in providing needle penetration resistance of the non-woven composite cocoon structure by restricting the relative motion of fibres, which prevents the sharp tip of the needle from pushing aside fibres and penetrating between them. The wild A. pernyi cocoon exhibits superior thermal buffer over the domestic B. mori cocoon. The unique structure of the A. pernyi cocoon wall with mineral crystals deposited on the cocoon outer surface, can prohibit most of the air from flowing inside of the cocoon structure, which shows strong wind resistance under windy conditions.

Microstructure and mechanical properties of silk from different components of the Antheraea pernyi cocoon

Silk fibres from different components of the Antheraea pernyi silkworm cocoon, namely peduncle, outer floss, and cocoon shells (outermost layer and pelade layer) were studied in detail to gain insights into the structure-property-function relationship. Among the fibres from different components, peduncle fibres are the softest with the largest viscoelastic lag, which may reduce the oscillation amplitude when a cocoon hangs on a twig. Fibres from the outermost layer are the toughest and have the largest breaking energy. Outer floss fibres have the highest content of sericin (about 11.98%) but their hardness and elasticity are intermediate. Pelade fibres are shape - preservable and stable with superior hardness and elasticity. The understanding of the properties of different silk fibres is essential for understanding their respective roles in the function of a silk cocoon and will also inspire new designs of protective materials under stringent environmental conditions.