Parametric study of different fins for a rocket at supersonic flow

Various parameters including the fins with variable span to chord ratio, curvature radius, and setting angle have been investigated between the flat fin and wrap around fin (WAF) rocket configurations at supersonic flow. The results show that under the same flight condition, the flat fins can provide a higher lift and pitching moments than the WAFs. Due to the symmetric effect, any extra side forces, moments as well as the self-induced rolling characteristics will be not generated as compared to the WAF configurations. The WAFs can greatly improve the longitudinal stability and enhance the longitudinal aerodynamic characteristics for the whole rocket. The static pressure distributions at different chordwise positions together with the force variations around the fins have been obtained computationally and analyzed in detail.

Aerodynamic characteristics of a wrap-around fin rocket

Purpose – The purpose of this paper is to investigate the aerodynamics characteristics (especially the side force/moment and rolling characteristics), to analyze the impacts generated by different parameters of wrap-around fins (WAFs) and to find the corresponding mechanism.Design/methodology/approach – The paper has adopted three different types of WAFs for the rocket configurations and the sub-regions dividedtechnology to investigate the lateral and rolling characteristics of WAFs, including the fins with variations in span to chord ratio, thickness,leading-edge sweep, curvature radius, fin numbers, setting angles and rotated angles. Simulations have been performed at Mach numbers from 3 to 4 through an angle-of-attack range of about 0° to 10° and at model rolling angles of 45° to 90°.Findings – The paper shows that the WAF configurations can greatly improve the longitudinal stability and enhance the longitudinal aerodynamic characteristics for the whole rocket. The total drag of the whole rocket is mainly stemmed from the body, while the drag generated by the WAF account for only about 7.42 per cent. The extra side forces and rolling moments are due largely to the unequal pressure distributions on both sides of the fin (windward or leeward). Maintaining a certain negative setting angle (d) can effectively avoid the coning movement and improve the flight stability at high angles of attack. The size of the span and chord are two main factors in controlling the longitudinal characteristics. For the side force/moment and rolling characteristics, different geometric parameters of the WAFs have played different roles.Originality/value – The paper provides the qualitative and quantitative analysis for different WAFs configurations by investigating the curves ofdifferent parameters and contouring of static pressure distributions. Findings can provide some suggestions for the designers for avoiding some significant dynamic problems, such as Magnus instability and roll rate variations during flight.

Substrate-induced coagulation (SIC) of nano-disperse carbon black in non-aqueous media : a method of manufacturing highly conductive cathode materials for Li-ion batteries by self-assembly

Substrate-induced coagulation (SIC) is a coating process based on self-assembly for coating different surfaces with fine particulate materials. The particles are dispersed in a suitable solvent and the stability of the dispersion is adjusted by additives. When a surface, pre-treated with a flocculant e.g. a polyelectrolyte, is dipped into the dispersion, it induces coagulation resulting in the deposition of the particles on the surface. A non-aqueous SIC process for carbon coating is presented, which can be performed in polar, aprotic solvents such as N-Methyl-2- pyrrolidinone (NMP). Polyvinylalcohol (PVA) is used to condition the surface of substrates such as mica, copperfoil, silicon-wafers and lithiumcobalt oxide powder, a cathode material used for Li-ion batteries. The subsequent SIC carbon coating produces uniform layers on the substrates and causes the conductivity of lithiumcobalt oxide to increase drastically, while retaining a high percentage of active battery material.

Self-cleaning wool: effect of noble metals and silica on visible-light-induced functionalities of nano TiO2 colloid

© 2014 The Textile Institute. This study intends to enhance the functionality of titanium dioxide (TiO2) nanoparticles applied to wool fabrics under visible light. Herein, TiO2, TiO2/SiO2, TiO2/Metal, and TiO2/Metal/SiO2 nanocomposite sols were synthesized and applied to wool fabrics through a low-temperature sol–gel method. The impacts of three types of noble metals, namely gold (Au), platinum (Pt), and silver (Ag), on the photoefficiency of TiO2 and TiO2/SiO2 under visible light were studied. Different molar ratios of Metal toTiO2 (0.01, 0.1, 0.5, and 1%) were employed in synthesizing the sols. Photocatalytic efficiency of fabrics was analyzed through monitoring the removal of red wine stain and degradation of methylene blue under simulated sunlight and visible light, respectively. Also, the antimicrobial activity against Escherichia coli (E. coli) bacterium and the mechanical properties of fabrics were investigated. Through applying binary and ternary nanocomposite sols to fabrics, an enhanced visible-light-induced self-cleaning property was imparted to wool fabrics. It was concluded that the presence of silica and optimized amount of noble metals had a synergistic impact on boosting the photocatalytic and antimicrobial activities of coated samples. The fabrics were further characterized using attenuated total reflectance, energy-dispersive X-ray spectrometry, and scanning electron microscopy images.

An evaluation of self-report measures of cognitive distortions and empathy among Australian sex offenders

The modification of deviant cognitions and the enhancement of victim empathy are central components in many treatment programs for sex offenders. There appear to be three broad problems with self-report measures of these factors: variations in the psychometric evaluation of measures; the transparency of items and thus the likely influence of social desirability; and the difficulty of determining which measures are specific to particular types of sex offenders. The aim of this study was to investigate these three issues among child molesters (CMs), and men convicted of sex offences against adults (ASOs). Data were collected from 36 CMs and 31 ASOs and from two comparison groups (33 men convicted of nonsexual offences and 40 nonoffenders from the community), to assess the reliability (internal and test-retest) and validity (discriminant, construct, and face) of measures, the influence of sexual social desirability on responding and the specificity of measures to both sex offender groups. Collectively, the results raise issues related to the assessment of sex offenders that require further investigation. They also have theoretical implications about the relationship between cognitive and emotive processes among sex offenders.

Self-adaptive clock synchronization for computational grid

This paper presents an innovative method to synchronize physical clocks for a computational grid, in particular for a computational grid linked through the asynchronous Intranet or Internet environments. The method discussed is an asynchronous self-adaptive clock synchronization mechanism. Two strategies for clock synchronisation are introduced. (1) Use continuous time intervals to calculate the precision of clocks, which can reduce the effect of network delay efficiently. (2) Every node synchronizes its clock with its leader actively. In addition, a node self-adaptive model is presented, and the relationship between the clock precision and synchronization time is induced, hence a node can predict when it should begin the synchronization process. Detailed simulation and extension of this issue are provided at the end of the paper. The presented model is both practical and feasible.

Self-adaptive clock synchronization for computational grid

Abstract This paper presents an innovative method to synchronize physical clocks for a computational grid, in particular for a computational grid linked through the asynchronous Intranet or Internet environments. The method discussed is an asynchronous self-adaptive clock synchronization mechanism. Two strategies for clock synchronization are introduced. (1), Use continuous time intervals to calculate the precision of clocks, which can reduce the effect of network delay efficiently. (2) Every node synchronizes its clock, with its leader actively. In addition, a node self-adaptive model is presented, and the relationship between the clock precision and synchronization time is induced, hence a node can predict when it should begin the synchronization process. Detailed simulation and extension of this issue are provided at the end of the paper. The presented model is both practical and feasible

Sexual content induced delay : a re-examination investigating relation to sexual desire

This article reports the utility of an information processing approach to examine whether there is a relationship between sexual content induced delay and levels of sexual desire as determined by self-report questionnaires. We tested this idea using a partial replication of the J. H. Geer and H. S. Bellard (1996) protocol demonstrating sexual content induced delay (SCID) in responding to sexual versus neutral words. In addition, the experiment examined whether SCID was different in people with varying levels of sexual desire. It was hypothesized that persons with low levels of sexual desire might respond more slowly to sexual word cues than others. Words with equal frequency of usage and similar word length were chosen from among those used in the Geer and Bellard study. The experiment was conducted with 171 volunteers who completed sexual desire questionnaires, lexical decision making tasks, and word ratings. The SCID effect was demonstrated by both men and women in the study with no significant variation between the sexes. In accordance with prediction, it was found that persons with lower levels of sexual desire responded more slowly to sexual stimuli than other participants, and rated sexual words as less familiar, less acceptable, and less positive emotionally to them. These findings have implications for understanding how emotional content contributes to SCID. They also suggest that further exploration of these ideas, perhaps using other stimulus modalities, may be helpful in advancing understanding of responses to sexual cues, and the potential implications that may have in better understanding sexual desire.

Self-assembly and film stability of a micelle of a single-chain quaternary ammonium amphiphile containing azobenzene on mica

The self-assembling behavior of a single-chain quaternary ammonium amphiphile bearing azobenzene (C₁₂AzoC₆N⁺) on freshly cleaved mica sheet has been investigated by atomic force microscopy (AFM) method. Confocal microscopic Raman spectra confirm the adsorption of the self-assembled monolayer structure. Ex-situ AFM reveals that C₁₂AzoC₆N⁺ forms branch-like stripes indicating the fusion and reorganization of the micelles during drying in air as the in-situ AFM has revealed that surfactant forms spherical micelles on the mica surface. The nano-sized surface structure is strongly dependent on the change of molecular structure, which resulted from photo-induced isomerization. The nano-sized stripe is quite stable even being annealed at 90 °C for 4 h.

Self-assembled diblock copolymer complexes via competitive hydrogen bonding

This thesis investigates self-assembly and microphase separation induced by competitive hydrogen bonding in A-b-BC diblock copolymer/homopolymer systems. A series of ordered and disordered morphologies including lamellae, hexagonal cylinders, wormlike microdomains and hierarchical structures were observed. The morphological transitions are correlated with hydrogen bonding interactions in terms of the association constants.

Engineering molecular self-assembled fibrillar networks by ultrasound

The architecture of self-organized three-dimensionally interconnected nanocrystal fibrillar networks has been achieved by ultrasound from a solution consisting of separate spherulites. The ultrasound stimulated structural transformation is correlated to the striking ultrasonic effects on turning nongelled solutions or weak gels into strong gels instantly, with enhancement of the storage modulus up to 3 magnitudes and up to 4 times more gelling capability. The basic principle involved in the ultrasound-induced structural transformation is established on the basis of the nucleation-and-growth model of a fiber network formation, and the mechanism of seeding multiplication, aggregation suppressing, and fiber distribution and growth promotion is proposed. This novel technique enables us to produce self-supporting gel functional materials possessing significantly modified macroscopic properties, from materials previously thus far considered to be “useless”, without the use of chemical stimuli. Moreover, it provides a general strategy for the engineering of self-organized fiber network architectures, and we are consequently able to achieve the supramolecular functional materials with controllable macroscopic properties.

Hydrogen bonding induced vesicular morphologies in diblock copolymer complexes

It is well-known that the self-assembly of block copolymers either in water or in organic solvents can form a wide range of morphologies in nanometer dimensions depending on its chemical nature. In the present study, the complexation and aggregate morphologies in a model AB/AC diblock copolymer system consisting of polystyrene-block-poly(acrylic acid) (PS-b-PAA) and polystyrene-block-poly(ethylene oxide) (PS-b-PEO) in water were studied using transmission electron microscopy (TEM), small angle X-ray scattering (SAXS), and dynamic light scattering (DLS). By varying the relative amounts of the two block copolymers, a variety of bilayer aggregates were formed, including vesicles, multilamellar vesicles (MLVs), thick-walled vesicles (TWVs), interconnected compound vesicles (ICCVs), and irregular aggregates. The hydrophobic PS blocks were segregated as the cores while the hydrogen bonded PEO and PAA blocks formed the coronae of bilayer aggregates. We also investigate how the addition of PS-b-PEO into PS-b-PAA solutions influences the aggregate morphology of the resulting complexes. This work introduces a viable route to multicompartment vesicles in aqueous solutions. The formation of block copolymer vesicles in water is of particular interest because of their potential in various applications.

Microphase separation induced by competitive hydrogen bonding interactions in semicrystalline triblock copolymer/homopolymer complexes

Microphase separation through competitive hydrogen bonding interactions in ABC/D triblock copolymer/ homopolymer complexes is studied for the first time. This study investigated self-assembled nanostructures that are obtained in the bulk, by the complexation of a semicrystalline polystyrene-block-poly(4-vinylpyridine)-block-poly(ethylene oxide) (SVPEO) triblock copolymer with a poly(4-vinyl phenol) (PVPh) homopolymer in tetrahydrofuran (THF). In these complexes, microphase separation takes place due to the disparity in intermolecular interactions among PVPh/P4VP and PVPh/PEO pairs. At low PVPh concentrations, PEO interacts relatively weakly with PVPh, whereas in the complexes containing more than 30 wt% PVPh, the PEO block interacts considerably with PVPh, leading to the formation of composition-dependent nanostructures. SAXS and TEM results indicate that the cylindrical morphology of a neat SVPEO triblock copolymer changes into lamellae structures at 20 wt% of PVPh then to disordered lamellae with 40 wt% PVPh. Wormlike structures are obtained in the complex with 50 wt%PVPh, followed by disordered spherical microdomains with size in the order of 40–50 nm in the complexes with 60–80 wt% PVPh. Moreover, when the content of PVPh increases to 80 wt%, the complexes show a completely homogenous phase of PVPh/P4VP and PVPh/PEO with phase separated spherical PS domains. The fractional crystallization behavior in SVPEO and complexes at lower PVPh content was also examined. A structural model was proposed to explain the microphase separation and self-assembled morphologies of these complexes based on the experimental results obtained. The formation of nanostructures and changes in morphologies depend on the relative strength of hydrogen bonding interactions between each component block of the copolymer and the homopolymer.

Azobenzene moiety variation directing self-assembly and photoresponsive behavior of azo-surfactants

The effect of varying the position of the azobenzene group within two comparable photoresponsive amphiphiles on their capability to form lyotropic liquid crystals (LLCs) was investigated in detail in this study. Two photoresponsive amphiphiles having comparable structures were designed and synthesized consisting of hydrophilic oligooxyethylene units, a hydrophobic alkyl chain and a light-sensitive azobenzene moiety. When the azobenzene group was located in the middle of the hydrophobic alkyl chain, multiple LLC phases were observed at various water contents in the azo-surfactant–water binary system. In contrast, when the azobenzene group was directly attached to the hydrophilic domain, the azo-surfactant–water binary system exhibited only lamellar phases. The temperature dependence of these self-organised nanostructures was also investigated by the combination of small angle X-ray scattering (SAXS), differential scanning calorimetry (DSC), and rheology. Under alternating UV and visible light irradiation, reversible trans–cis photoisomerization of the azobenzene group occurred efficiently in dilute solution for both azo-surfactants. However, only photoisomerization of the surfactant possessing the azobenzene group localized in the middle of the alkyl chain induced significant changes in the self-assembled structure and its bulk properties. This study demonstrates that self-assembly and photoresponsive behaviour of photosensitive amphiphiles is extremely sensitive to the position of the photoactive moiety within the surfactant molecular architecture.

Auto-amputation of the tongue associated with flupenthixol induced extrapyramidal symptoms.

We report a case of tongue auto-amputation in a mentally retarded patient after a flupenthixol injection. Four days after flupenthixol administration, the patient developed orolingual dyskinetic movements involving mainly tongue biting and protrusion. Self-mutilation in this case may be secondary to flupenthixol induced acute atypical orolingual dyskinesia in the face of mental retardation.