"Roll Up and Spend Your Last Dime". The Merry-go-round of Children`s Extra-curricular Activities in Modern Society.

"Step up and play" begins the famous hit song 'Penny Arcade'. And so it
was for thousands of Australian families, as their eldest child began school
this year, and the associated endless merry-go-round of extra-curricular
activities also began. But how many of those families realise that the song ends "Roll up and spend your last dime!"? While the perceived benefits of
children's involvement in extracurricular activities are many and are widely accepted, there are also costs, not only in terms of money but also in terms
of time. Evidence from a study conducted in Melbourne highlights the fact that, for many families such as those on low incomes and those headed by a single parent, both the time and the money costs may be prohibitive. This article highlights parents' perceptions of the benefits·and costs of children's extra-curricular activities, and explores the implications of changing family and household structures for families' capacity to sustain such activities.

It's not only rock and roll: rockumentary, direct cinema and performative display

The documentary form commonly referred to as rockumentary has become, since its inception in the early 1960s, a staple of American direct cinema. In keeping with its associations with observational direct cinema, rockumentary emphasizes showing over telling; that is, rockumentary privileges the visual capacities of documentary over patterns of exposition. While the ‘documentary display’ of rockumentary is comparable to certain features of  the early ‘cinema of attractions’ it exceeds such features in its focus on  performance. Typically, an emphasis within documentary theory on unmediated and unreconstructed access to the real as the basis of documentary film has not admitted a place for notions of performance before the camera. Rockumentary, with its relentless foregrounding of the performing body and the performance of musicians, revises this  understanding. This essay examines rockumentary within the context of direct cinema as a mode centred on a documentary performative display as it operates within selected works from the 1960s to the present. The film theorist Brian Winston has claimed that ‘[d]irect cinema made the rock performance/tour movie into the most popular and commercially viable documentary form thus far.’ The inverse of this assessment may be closer to the mark: the rockumentary turned direct cinema into a commercially and widely available form, one which the rockumentary has at times returned to and superseded in its scopic attention to performative display.

Shake rattle and roll: a journey with Parkinson's

This is the journey of a man suffering from Parkinson's disease. Ross Collins tells of his past twelve years' experiences of living with Parkinson's. Before, he had a steady job with Victoria Police, with promising future prospects; and was happily married with two young children. The disease struck him at an early age, changing his life and setting him on a different course. His outlook on life has changed, and his decision-making influenced; as well, his relationships with his family affected. He feels normal only when he is shaking, rattling and rolling along on his Harley. His wish for a cure leads him to pin his hopes on faith healing by the 'miracle man', in Brazil. The first two visits did not seem to have done anything to improve his physical condition. Ross is returning to Brazil for the third time, hoping against hope that his condition could be improved by a miracle healing. This documentary gives an intimate look into the life of a Parkinson's disease sufferer and that of his family. Includes al.

Electron back scattered diffraction (EBSD) characterization of warm rolled and accumulative roll bonding (ARB) processed ferrite

An interstitial free (IF) steel was severely deformed using accumulative roll bonding (ARB) process and warm rolling. The maximum equivalent strains for ARB and warm rolling were 4.8 and 4.0, respectively. The microstructure and micro-texture were studied using optical microscopy and scanning electron microscopy equipped with electron back scattered diffraction (EBSD). The grain size and misorientation obtained by both methods are in the same range. The microstructure in the ARB samples after 6 cycles is homogeneous, although a grain size gradient is observed at the layers close to the surface. The through thickness texture gradient in the ARB samples is different from the warm rolled samples. While a shear texture (⟨110⟩//rolling plane normal direction (ND)) at the surface and rolling texture at the center region is developed in the ARB  samples, the overall texture is weak. The warm rolled samples display a sharp rolling texture through the thickness with increasing the sharpness toward the center. These differences are attributed to the fact that the central region of ARB strip is comprised of material that was once at the surface. The ARB process  can suppress the formation of shear bands which are conventional at warm rolled IF steels. EBSD study on the sample with 6th cycle of ARB following the annealing at 750 ◦C verified a texture gradient through the thickness of the sheet. The shear orientations at the surface and at the quarter thickness layers can be identified even after annealing. The overall weak texture and existence of shear orientations make ARB processed samples unfavorable for sheet metal forming in compare with warm rolled samples.

Nucleation and growth during reactions in accumulative roll bonding of Ti/Al multilayers

A two-stage process in the formation of TiAl₃ was found in the accumulative roll bonding (ARB) Ti/Al multilayers. The distribution of layer spacing did not become broad enough to lose the main features of the double exothermal behaviour. A modified model based on thin films was set up to describe the kinetic characteristics of the formation of TiAl₃ in ARB samples.

The kinetics of two-stage formation of TiAl3 in multilayered Ti/Al foils prepared by accumulative roll bonding

The solid-state reactions of Ti/Al multilayered samples produced by Accumulative Roll Bonding (ARB) have been investigated using differential scanning calorimetry, X-ray diffraction and scanning electron microscopy. The kinetics of the formation of the intermetallic compound TiAl3 was highlighted. Experimental evidence and analysis of the data shows that, there was a two-stage process in the formation of TiAl₃ in the ARB Ti/Al reactive multilayered samples. Calorimetric and microstructural analyses also suggest that the interdiffusion of Al and Ti which led to solid solutions preceded the formation of intermetallic compounds. Despite the apparent chaos in the thickness of the ARB multilayered samples, the distribution of layer spacing did not become broad enough to lose the main features of the double exothermal behaviour. Isothermal DSC shows a larger Avarami constant in ARB Ti/Al multilayered structures than was found in Ti/Al thin films. A modified model based on thin films was set up to describe the kinetic characteristics of the formation of the intermetallic compound TiAl₃ in ARB samples.

Improving the prediction of the roll separating force in a hot steel finishing mill

This paper focuses on the development of a hybrid phenomenological/inductive model to improve the current physical setup force model on a five stand industrial hot strip finishing mill. We approached the problem from two directions. In the first approach, the starting point was the output of the current setup force model. A feedforward multilayer perceptron (MLP) model was then used to estimate the true roll separating force using some other available variables as additional inputs to the model.

It was found that it is possible to significantly improve the estimation of a roll separating force from 5.3% error on average with the current setup model to 2.5% error on average with the hybrid model. The corresponding improvements for the first coils are from 7.5% with the current model to 3.8% with the hybrid model. This was achieved by inclusion, in addition to each stand's force from the current model, the contributions from setup forces from the other stands, as well as the contributions from a limited set of additional variables such as: a) aim width; b) setup thickness; c) setup temperature; and d) measured force from the previous coil.

In the second approach, we investigated the correlation between the large errors in the current model and input parameters of the model. The data set was split into two subsets, one representing the "normal" level of error between the current model and the measured force value, while the other set contained the coils with a "large" level of error. Additional set of data with changes in each coil's inputs from the previous coil's inputs was created to investigate the dependency on the previous coil.

The data sets were then analyzed using a C4.5 decision tree. The main findings were that the level of the speed vernier variable is highly correlated with the large errors in the current setup model. Specifically, a high positive speed vernier value often correlated to a large error. Secondly, it has been found that large changes to the model flow stress values between coils are correlated frequently with larger errors in the current setup force model.

Influence of processing on the roll forming characteristics of recovery annealed steel

Roll forming (including corrugating) of high strength steel has for many years been treated as an art rather than a science. This work, by using analysis at both the microscopic and standard mechanical level, has demystified the production of these high strength steels, and has helped point the direction for further development of these efficient construction products.

From rural beginnings to statewide roll-out : evaluation of facilitator training for a group-based diabetes prevention program

Objective: To evaluate the approach used to train facilitators for a large-scale group-based diabetes prevention program developed from a rural implementation research project.

Participants: Orientation day was attended by 224 health professionals; 188 submitted the self-learning task; 175 achieved the satisfactory standard for the self-learning task and attended the workshop; 156 completed the pre- and post-training questionnaires.

Main outcome measures: Two pre- and post-training scales were developed to assess knowledge and confidence in group-based diabetes prevention program facilitation. Principal component analysis found four factors for measuring training effectiveness: knowledge of diabetes prevention, knowledge of group facilitation, confidence to facilitate a group to improve health literacy and confidence in diabetes prevention program facilitation. Self-learning task scores, training discontinuation rates and satisfaction scores were also assessed.

Results: There was significant improvement in all four knowledge and confidence factors from pre- to post-training (P < 0.001). The self-learning task mean test score was 88.7/100 (SD = 7.7), and mean assignment score was 72.8/100 (SD = 16.1). Satisfaction with training scores were positive and 'previous training' interacted with 'change in knowledge of diabetes prevention program facilitation' but not with change in 'confidence to facilitate.'

Conclusions: The training program was effective when analysed by change in facilitator knowledge and confidence and the positive mean satisfaction score. Learning task scores suggest tasks were manageable and the requirement contributed to facilitator self-selection. Improvement in confidence scores in facilitating a group-based diabetes prevention program, irrespective of previous training and experience, show that program-specific skill development activities are necessary in curriculum design.

Comparison of bending of automotive steels in roll forming and in a V-die

Bending in a V-die has been used to indicate the outcome of bending in cold roll forming, although little direct correlation has been performed. In this work direct comparison of the springback in both processes was performed using six samples of automotive steels in a conventional roll forming line where the transverse springback is measured. A bend of similar radius was formed in a V-die and the springback determined. In general, the springback in V-die forming was greater than in roll forming, in some cases by a factor of 2. The theoretical springback angle was determined for all steels using a simple and approximate analytical equation and compared to the experimental roll forming and bending results. While for the roll forming process good agreement was achieved the theoretical values significantly underestimated springback in the V-bending process.