Comparisons between two empirical yield criteria for rock masses

In general, rock masses are inhomogeneous, discontinuous media composed of rock material and naturally occurring discontinuities such as joints, fractures and bedding planes. Because of these features, the strength of rock masses is notoriously difficult to assess. Nonetheless, many criteria have been proposed for estimating rock mass strength. Based on the finite element upper and lower bound limit analysis methods, this study examined two empirical yield criteria for rock masses, the Hoek-Brown failure criterion (2002) and the Douglas criterion (2002). The comparisons showed that very different results may be obtained using the same input parameters. Therefore, it is interesting to discuss the source of these differences.

Application of neural network to rock slope stability assessments

It is known that rock masses are inhomogeneous, discontinuous media composed of rock material and naturally occurring discontinuities such as joints, fractures and bedding planes. These features make any analysis very difficult using simple theoretical solutions. Generally speaking, back analysis technique can be used to capture some implicit parameters for geotechnical problems. In order to perform back analyses, the procedure of trial and error is generally required. However, it would be time-consuming. This study aims at applying a neural network to do the back analysis for rock slope failures. The neural network tool will be trained by using the solutions of finite element upper and lower bound limit analysis methods. Therefore, the uncertain parameter can be obtained, particularly for rock mass disturbance.

Investigation of seismic effects on disturbed rock slope stability assessments

For general stability analysis of rock slopes, rock mass strength and rock mass disturbance are definitely should be considered. In addition, the impact of earthquakes must be taken into account. In fact, the rock mass strength is very difficult to be assessed which causes the difficulty of analysing rock slope stability. Therefore, an empirical failure criterion, the Hoek-Brown failure criterion, has been proposed. It is one of the most widely accepted approaches to estimate rock mass strength. The rock mass disturbance is important and was found having significant influence on evaluating rock slope stability, especially for rock slope with poor quality rock mass. In the Hoek-Brown failure criterion, the disturbance factor can represent the level of the rock mass disturbance which would provide a reasonable basis for estimating rock mass strength. This research will not only discuss the slope factor of safety, but also consider the influence of the seismic force on rock slope stability assessment using pseudo-static method. In practice, only horizontal seismic coefficient is used. Various magnitudes of the disturbance factor and recommended blasting damage zone thickness are also taken into account. The blasting damage zone thickness considered ranges from 0.5 to 2.5 times of slope height. The research results have potential to be extended and then sets of comprehensive stability charts can be provided for the rock slope stability evaluations. They will be convenient tools for practising engineers. In this study, finite element upper bound and lower bound limit analysis methods are employed. Their applicability has been investigated in some previous studies. The differences between upper bound and lower bound solutions are less than ±10% which would provide reasonable and acceptable range for rock slope stability safety factor estimation.

Back analyses for slope failures in rock

Some of the geotechnical parameters used in the analysis may not be accurately measured directly from laboratory tests due to effects of sample disturbance and errors of tests. The back analysis or the observational method are thus often applied to determine the representative and/or dominant strength parameters based on field observations in practice. Based on the Hoek-Brown failure criterion, it was known that the disturbance factor (D) should be determined with caution. The difficulty of measuring rock mass disturbance accurately has been shown. Three rock slope failures will be investigated in this paper using back-analysis technique. In addition, various rock mass strength parameters are taken into consideration.

Improving rockbolt design in tunnels using topology optimization

Finding an optimum reinforcement layout for underground excavation can result in a safer and more economical design, and is therefore highly desirable. Some works in the literature have applied topology optimization in tunnel reinforcement design in which reinforced rock is modeled as homogenized isotropic material. Optimization results, therefore, do not clearly show reinforcement distributions, leading to difficulties in explaining the final outcomes. To overcome this deficiency, a more sophisticated modeling technique in which reinforcements are explicitly modeled as truss elements embedded in rock mass media is used. An optimization algorithm extending the solid isotropic material with penalization method is introduced to seek for an optimal bolt layout. To obtain the stiffest structure with a given amount of reinforced material, external work along the opening is selected as the objective function with a constraint on the volume of reinforcement. The presented technique does not depend on material models used for rock and reinforcements and can be applied to any material model. Nonlinear material behavior of rock and reinforcement is considered in this work. Through solving some typical examples, the proposed approach is proved to enhance the conventional reinforcement design and provide clear and practical reinforcement layouts.