Novel reversible and switchable electrolytes based on magneto-rheology

Replacing organic liquid electrolytes with solid electrolytes has led to a new perspective on batteries, enabling high-energy battery chemistry with intrinsically safe cell designs. However, most solid/gel electrolytes are easily deformed; under extreme deformation, leakage and/or short-circuiting can occur. Here, we report a novel magneto-rheological electrolyte (MR electrolyte) that responds to changes in an external magnetic field; the electrolyte exhibits low viscosity in the absence of a magnetic field and increased viscosity or a solid-like phase in the presence of a magnetic field. This change from a liquid to solid does not significantly change the conductivity of the MR electrolyte. This work introduces a new class of magnetically sensitive solid electrolytes that can enhance impact resistance and prevent leakage from electronic devices through reversible active switching of their mechanical properties.

Improvement in mechanical properties of aluminum polypropylene composite fiber

Aluminum particles (Al) were added to polypropylene (PP) in the presence of poly ethylene glycol (PEG) and polypropylene-graft-maleic anhydride to produce composites. The composites were then melt-spun into a mono filament and tested for tensile properties, diameter evenness and morphology. Melt rheological properties of Al/PP composites were studied in linear viscoelastic response regions. It was observed that level of dispersion of aluminum particles within a polypropylene composite fiber could be improved by incorporating polyethylene glycol. The improvement of dispersion led to an improvement in the fibers mechanical properties through a reduction of the coefficient of variation of fiber diameter.

Architecture of supramolecular soft functional materials: from understanding to micro-/nanoscale engineering

This article gives an overview of the current progress of a class of supramolecular soft materials consisting of fiber networks and the trapped liquid. After discussing the up-to-date knowledge on the types of fiber networks and the correlation to the rheological properties, the gelation mechanism turns out to be one of the key subjects for this review. In this concern, the following two aspects will be focused upon: the single fiber network formation and the multi-domain fiber network formation of this type of material. Concerning the fiber network formation, taking place via nucleation, and the nucleation-mediated growth and branching mechanism, the theoretical basis of crystallographic mismatch nucleation that governs fiber branching and formation of three-dimensional fiber networks is presented. In connection to the multi-domain fiber network formation, which is governed by the primary nucleation and the subsequent formation of single fiber networks from nucleation centers, the control of the primary nucleation rate will be considered. Based on the understanding on the the gelation mechanism, the engineering strategies of soft functional materials of this type will be systematically discussed. These include the control of the nucleation and branching-controlled fiber network formation in terms of tuning the thermodynamic driving force of the gelling system and introducing suitable additives, as well as introducing ultrasound. Finally, a summary and the outlook of future research on the basis of the nucleation-growth-controlled fiber network formation are given.

The effect of alternate heating rates during cure on the structure-property relationships of epoxy/MMT clay nanocomposites

This paper investigates the effect of both the mixing technique and heating rate during cure on the dispersion of montmorillonite (MMT) clay in an epoxy resin. The combination of sonication and using a 10. °C/min heating rate during cure was found to facilitate the dispersion of nanoclay in epoxy resin. These processing conditions provided a synergistic effect, making it possible for polymer chains to penetrate in-between clay galleries and detach platelets from their agglomerates. As the degree of dispersion was enhanced, the flexural modulus and strength properties were found to decrease by 15% and 40%, respectively. This is thought to be due to individual platelets fracturing in the nanocomposite. Complementary techniques including X-ray diffraction (XRD), small angle X-ray scattering (SAXS), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX), transmission electron microscopy (TEM) and optical microscopy were essential to fully characterise localised and spatial regions of the clay morphologies.

Monitoring the early stage self-assembly of enzyme-assisted peptide hydrogels

The early stages of the self-assembly of peptide hydrogels largely determine their final material properties. Here we discuss experimental methodologies for monitoring the self-assembly kinetics which underpin peptide hydrogel formation. The early stage assembly of an enzyme-catalysed Fmoc-trileucine based self-assembled hydrogel was examined using spectroscopic techniques (circular dichroism, CD, and solution NMR) as well as chromatographic (HPLC) and mechanical (rheology) techniques. Optimal conditions for enzyme-assisted hydrogel formation were identified and the kinetics examined. A lag time associated with the formation and accumulation of the self-assembling peptide monomer was observed and a minimum hydrogelator concentration required for gelation was identified. Subsequent formation of well defined nano-and microscale structures lead to self-supporting hydrogels at a range of substrate and enzyme concentrations. 1H NMR monitoring of the early self-assembly process revealed trends that were well in agreement with those identified using traditional methods (i.e. HPLC, CD, rheology) demonstrating 1H NMR spectroscopy can be used to non-invasively monitor the self-assembly of peptide hydrogels without damaging or perturbing the system.

Thermosets : structure, properties and applications

Structure-property relationships of thermosets are important in the manufacture and application of materials. Understanding the desired properties of a material in a certain application is related to the material's structure and vice versa. The way in which the material is processed is also a determinant of the structure and resulting properties. Many books have been written about the chemistry of thermosets but with only brief consideration of structure-property relationships. This book focuses on how the structure and properties of a range of thermosets affect the final material and applications. It is composed of two parts: I Structure and properties of thermosets and II Applications of thermosets. Part I starts with a comprehensive overview of thermosets covering structure, properties and processing for advanced applications, followed by four chapters addressing mechanical properties, thermal properties, rheology, and nanostructures and toughening. The applications presented in Part II range from the use of thermosets in the building and construction industry to aerospace applications, electrical applications, thermoset adhesives and insulation materials in appliances and other applications. We hope that this book will not only be a useful textbook for advanced undergraduate and postgraduate students, but also a concise reference for researchers in academia and engineers in related industries. I would like to express my sincere gratitude to the staff of Woodhead Publishing Limited, especially Kathryn Picking who invited me to edit this book and helped develop the initial content, also Adam Hooper, Helen Bradley, Emily Cole, Francis Dodds and Rachel Cox for their assistance in many ways during the preparation of the manuscript. Finally, I wish to express my appreciation and respects to all the contributors for their commitment, patience and pleasant cooperation.