Effect of weight reduction pre-treatment on the electrical and thermal properties of polypyrrole coated woven polyester fabrics

Weight reduction increased the amount of deposited polypyrrole (PPy) on the polyester (PET) fiber surface, leading to a considerable decrease in electrical resistance and improved heat generation capacity for the PPy coated PET fabrics. Application of dc voltages to an insulated roll of PPy-coated fabric increased the temperature to about 90 °C. This showed the suitability of these fabrics for heating applications. The optimum PPy deposition of about 2.8% was obtained in samples weight reduced by aqueous sodium hydroxide treatment. AFM images revealed a smooth surface morphology of the untreated fiber whereas the treated fiber had a high surface roughness.

Aerobic exercise and resistance training for the management of type 2 diabetes mellitus

BACKGROUND
Implementation of a structured physical exercise program can improve glycemic control in patients with type 2 diabetes mellitus.

OBJECTIVE
To evaluate the efficacy of aerobic exercise and resistance training (either alone or in combination) in the management of type 2 diabetes mellitus.

DESIGN AND INTERVENTION
DARE (Diabetes Aerobic and Resistance Exercise) was a 26-week, single-center, parallel-group, randomized, controlled trial of patients with type 2 diabetes mellitus of >6 months' duration. Participants were aged 39-70 years with a baseline [HbA.sub.1c] level 6.6-9.9%. Exclusion criteria included current insulin therapy, regular exercise regime and blood pressure >160/95 mmHg. All participants underwent a 4-week run-in period that comprised 12 sessions of combined aerobic exercise and resistance training; participants who attended [greater than or equal to] 10 sessions were eligible to enter the study. Eligible participants were randomly allocated to one of four groups: aerobic exercise alone; resistance training alone; combined aerobic exercise and resistance training; and no intervention (control group). Exercise was performed three times weekly. The aerobic exercise group progressed from 15-20 min on a treadmill or bicycle ergometer per session at 60% of the maximum heart rate to 45 min per session at 75% of the maximum heart rate. The resistance training group performed 7 different exercises on weight machines per 45 min session, and progressed to 2-3 sets of each exercise at the maximum weight that could be lifted 7-9 times. The combined exercise group performed the full aerobic exercise program plus the full resistance training program. Participants in the control group reverted to their pre-study exercise levels.

OUTCOME MEASURES
The primary outcome measure was the change in [HbA.sub.1c] from baseline. Secondary outcome measures included changes in blood pressure, lipid profile, and body composition.

RESULTS
A total of 251 participants were eligible for intervention. The median session attendance was 80% (aerobic exercise), 85% (resistance training) and 86% (combined exercise). When compared with the control group, the HbA1c levels were reduced by 0.50% in the aerobic exercise group (P = 0.007) and by 0.38% in the resistance training group (P = 0.038). The combined exercise group had an additional reduction of 0.46% when compared with the aerobic exercise group (P = 0.014) and of 0.59% when compared with the resistance training group (P = 0.001). Decreases in [HbA.sub.1c] levels were greatest for participants with a baseline [HbA.sub.1c] level = 7.5% (P <0.001). For participants with a baseline level [HbA.sub.1c] <7.5%, significant improvements in glycemic control were observed in the combined exercise group only (P = 0.002). Changes in blood pressure and lipid profiles did not differ between the groups. By contrast, participation in a structured exercise program improved body composition.

CONCLUSION
Although aerobic exercise or resistance training alone improved glycemic control, additional improvements were observed with the combined exercise regimen.

Effect of a low-resource-intensive lifestyle modification program incorporating gymnasium-based and home-based resistance training on type 2 diabetes risk in Australian adults

OBJECTIVE--The purpose of this study was to assess the effectiveness of a low-resource-intensive lifestyle modification program incorporating resistance training and to compare a gymnasium-based with a home-based resistance training program on diabetes diagnosis status and risk.

RESEARCH DESIGN AND METHODS--A quasi-experimental two-group study was undertaken with 122 participants with diabetes risk factors; 36.9% had impaired glucose tolerance (1GT) or impaired fasting glucose (IFG) at baseline. The intervention included a 6-week group self-management education program, a gymnasium-based or home-based 12-week resistance training program, and a 34-week maintenance program. Fasting plasma glucose (FPG) and 2-h plasma glucose, blood lipids, blood pressure, body composition, physical activity, and diet were assessed at baseline and week 52.

RESULTS--Mean 2-h plasma glucose and FPG fell by 0.34 mmol/1 (95% CI--0.60 to--0.08) and 0.15 mmol/l (-0.23 to -0.07), respectively. The proportion of participants with IFG or IGT decreased from 36.9 to 23.0% (P = 0.006). Mean weight loss was 4.07 kg (-4.99 to -3.15). The only significant difference between resistance training groups was a greater reduction in systolic blood pressure for the gymnasium-based group (P = 0.008).

CONCLUSIONS--This intervention significantly improved diabetes diagnostic status and reduced diabetes risk to a degree comparable to that of other low-resource-intensive lifestyle modification programs and more intensive interventions applied to individuals with IGT. The effects of home-based and gymnasium-based resistance training did not differ significantly.

Novel B-site ordered double perovskite Ba2Bi0.1Sc0.2Co1.7O6-x for highly efficient oxygen reduction reaction

Double perovskite Ba₂Bi_0.1Sc_0.2Co_1.7O_6-x (BBSC) demonstrates low polarization resistance between 600 and 750 °C due to the high oxygen reduction rate of BBSC as reflected by its large D_V and k values, which are derived from the face centered cubic structure and high cobalt content.

Deactivation and regeneration of oxygen reduction reactivity on double perovskite Ba2Bi0.1Sc0.2Co1.7O6−x cathode for intermediate-temperature solid oxide fuel cells

in situ high-temperature X-ray diffraction and thermal gravimetric- differential thermal analysis on room-temperature powder, as well as X-ray diffraction, Raman spectroscopy, and transmission electron microscopy on quenched powder, were applied to study crystal structure and phase transformations in Ba₂Bi_0.1Sc_0.2Co _1.7O_6-x (BBSC). Heating BBSC in air to over 800 °C produces a pure cubic phase with space group Fm3m (no. 225), and cooling down below 800 °C leads to a mixture of three noncubic phases including an unknown phase between 200 and 650 °C, a 2H hexagonal BaCoO3 with space group P63/mmc (no. 194) between 600 and 800 °C, and an intermediate phase at 800 °C. These three phases exist concurrently with the major cubic phase. The weight gain and loss between 300 and 900 °C suggest the occurrence of cobalt reduction, oxidation, and disproportion reactions with dominant reduction reaction at above 600 °C. The thermal expansion of BBSC was also examined by dilatometry. BBSC has a highly temperature-dependent thermal expansion coefficient which relates well with its structure evolution. Furthermore, the oxygen reduction reaction (ORR) of BBSC was probed by symmetrical cell and three-electrode configurations. The presence of hexagonal phase at 700 °C rarely affects the ORR performance of BBSC as evidenced by a slight increase of its area-specific resistance (ASR) value following 48 h of testing in this three-electrode configuration. This observation is in contrast to the commonly held point of view that noncubic phase deteriorates performance of perovskite compounds (especially in oxygen transport applications). Moreover, cathodic polarization treatment, for example, current discharge from BBSC (tested in three-electrode configuration), can be utilized to recover the original ORR performance. The cubic structure seems to be retained on the cathodic polarization - the normal cathode operating mode in fuel cells. Stable 72-h performance of BBSC in cathodic polarization mode further confirms that despite the presence of phase impurities, BBSC still demonstrates good performance between 500 and 700 °C, the desired intermediate operating temperature in solid oxide fuel cells.

Defining plant resistance to Phytophthora cinnamomi : a standardized approach to assessment

Phytophthora cinnamomi is a soil-borne plant pathogen that causes devastating disease in agricultural and natural systems worldwide. While a small number of species survive infection by the pathogen without producing disease symptoms, the nature of resistance, especially under controlled conditions, remains poorly understood. At present, there are no standardized criteria by which resistance or susceptibility to P. cinnamomi can be assessed, and we have used five parameters consisting of plant fresh weight, root growth, lesion length, relative chlorophyll content of leaves and pathogen colonization of roots to analyse responses to the pathogen. The parameters were tested using two plant species, Zea mays and Lupinus angustifolius, through a time course study of the interactions and resistance and susceptibility defined 7days after inoculation. A scoring system was devised to enable differentiation of these responses. In the resistant interaction with Z. mays, there was no significant difference in fresh weight, root length and relative chlorophyll content in inoculated compared with control plants. Both lesion size and pathogen colonization of root tissues were limited to the site of inoculation. Following inoculation L. angustifolius showed a significant reduction in plant fresh weight and relative leaf chlorophyll content, cessation of root growth and increased lesion lengths and pathogen colonization. We propose that this technique provides a standardized method for plant-P. cinnamomi interactions that could be widely used to differentiate resistant from susceptible species.

High glucose-induced impairment in insulin secretion is associated with reduction in islet glucokinase in a mouse model of susceptibility to islet dysfunction

Type 2 diabetes is characterized by islet dysfunction resulting in hyperglycemia, which can then lead to further deterioration in islet function. A possible mechanism for hyperglycemia-induced islet dysfunction is the accumulation of advanced glycation end products (AGE). The DBA/2 mouse develops pancreatic islet dysfunction when exposed to a high glucose environment and/or obesity-induced insulin resistance. To determine the biochemical cause of dysfunction, DBA/2 and C57BL/6 control islets were incubated in 11.1 mM or 40 mM glucose in the absence or presence of the AGE inhibitor aminoguanidine (AG) for 10 days. Basal (2.8 mM glucose) insulin release was increased in both DBA/2 and C57BL/6 islets incubated with 40 mM vs 11.1 mM glucose for 10 days. Chronic exposure to hyperglycemia decreased glucose (20 mM)-stimulated insulin secretion in DBA/2 but not in C57BL/6 islets. AG significantly increased fold-induced insulin release in high glucose cultured DBA/2 mouse islets, but did not affect C57BL/6 islet function. DBA/2 islet glucokinase was significantly reduced following 40 mM glucose culture, compared with 11.1 mM glucose cultured DBA/2 islets and 40 mM glucose cultured C57BL/6 islets. Incubation of islets with AG resulted in a normalization of DBA/2 islet glucokinase levels. In conclusion, chronic high glucose-induced increases in AGE can result in islet dysfunction and this is associated with reduced glucokinase levels in a mouse model with susceptibility to islet failure.

Scalable Solid-Template Reduction for Designed Reduced Graphene Oxide Architectures

Herein, we report a solid-state reduction process (in contrast to solution-based approach) by using an environmentally friendly reductant, such as vitamin C (denoted VC), to be directly employed to solid-state graphene oxide (GO) templates to give the highly active rGO architecture with a sheet resistance of as low as 10 Ω sq–1. In addition, predesigned rGO patterns/tracks with tunable resistivity can be directly “written” on a preprepared solid GO film via the inkjet-printing technique using VC/H2O as the printing-ink. This advanced reduction process allows foreign active materials to be preincorporated into the GO matrix to form quality active composite architectures.

Highly stable external short-circuit-assisted oxygen ionic transport membrane reactor for carbon dioxide reduction coupled with methane partial oxidation

A membrane reactor allows for simultaneous separation and reaction, and thus, can play a good role to produce value-added chemicals. In this work, we demonstrated such a membrane reactor based on fluorite oxide samarium-doped ceria (SDC) using an external short-circuit concept for oxygen permeation. The fluorite phase was employed to impart its high structural stability, while its limited electronic conductivity was overcome by the application of an external short circuit to function the SDC membrane for oxygen transport. On one side of the membrane, i.e., feed side, carbon dioxide decomposition into carbon monoxide and oxygen was carried out with the aid of a Pt or Ag catalyst. The resultant oxygen was concurrently depleted on the membrane surface and transported to the other side of the membrane, favorably shifting this equilibrium-limited reaction to the product side. The transported oxygen on the permeate side with the aid of a GdNi/Al2O3 catalyst was then consumed by the reaction with methane to form syngas, i.e., carbon monoxide and hydrogen. As such, the required driving force for gas transport through the membrane can be sustained by coupling two different reactions in one membrane reactor, whose stability to withstand these different gases at high temperatures is attained in this paper. We also examined the effect of the membrane thickness, oxygen ionic transport rate, and CO2 and CH4 flow rates to the membrane reactor performance. More importantly, here, we proved the feasibility of a highly stable membrane reactor based on an external short circuit as evidenced by achieving the constant performance in CO selectivity, CH4 conversion, CO2 conversion, and O2 flux during 100 h of operation and unaltered membrane structure after this operation together with the coking resistance.

The effects of bed-rest and countermeasure exercise on the endocrine system in male adults: evidence for immobilization-induced reduction in sex hormone-binding globulin levels

BACKGROUND AND AIM: There is limited data on the effects of inactivity (prolonged bed-rest) on parameters of endocrine and metabolic function; we therefore aimed to examine changes in these systems during and after prolonged (56- day) bed-rest in male adults. SUBJECTS AND METHODS: Twenty healthy male subjects underwent 8 weeks of strict bed-rest and 12 months of follow-up as part of the Berlin Bed Rest Study. Subjects were randomized to an inactive group or a group that performed resistive vibration exercise (RVE) during bed-rest. All outcome parameters were measured before, during and after bed-rest. These included body composition (by whole body dual X-ray absorptiometry), SHBG, testosterone (T), estradiol (E2), PRL, cortisol (C), TSH and free T3 (FT3). RESULTS: Serum SHBG levels decreased in inactive subjects but remained unchanged in the RVE group (p<0.001). Serum T concentrations increased during the first 3 weeks of bed-rest in both groups (p<0.0001), while E2 levels sharply rose with re-mobilization (p<0.0001). Serum PRL decreased in the control group but increased in the RVE group (p=0.021). C levels did not change over time (p≥0.10). TSH increased whilst FT3 decreased during bed-rest (p all ≤0.0013). CONCLUSIONS: Prolonged bed-rest has significant effects on parameters of endocrine and metabolic function, some of which are related to, or counteracted by physical activity.

Self-cleaning and color reduction in wool fabric by nano titanium dioxide

Wool is a textile material that is valued for its strength, warmth, water resistance, and texture. But this natural fiber of the protein keratin lacks the stain resistance of synthetic fabrics and is also generally susceptible to harsh processing conditions. In this study, raw and oxidized wool fabrics were treated with nano titanium dioxide (TiO2) powder in an ultrasonic bath. These particles were linked to the wool surface by butane tetra carboxylic acid and also sodium hypophosphite was used as a catalyst. The photo-catalytic activity of TiO2 nanoparticles deposited on the wool fabrics was followed by the degradation of Acid Blue 113 as a stain and also determined by the degradation rate of food stains such as coffee, tea, and fruit juice under the ultraviolet rays. The results showed that increasing the amount of nano TiO2 leads to improved degradation of stains on the treated fabric.