Molecular alignment in nematic liquid crystals : a comparison between the results of experiments at high pressure and predictions based on mean field theories

The effects of high pressure on molecular arrangment in liquid crystals were observed by optical measurements on two nematogens. It was possible to deduce how volume varies as a factor of temperature and pressure and how nematic order parameter changes under the influence of high pressure.

Structuring in liquid alkanes between solid surfaces : force measurements and mean-field theory

Measurements have been made of the solvation forces between mica surfaces in the even-numbered n-alkanes from hexane to hexadecane. In all cases the force law is qualitatively very similar, characterized by a decaying oscillatory function of distance, as occurs for simple isotropic liquids. The spacing between successive minima in the force does not increase with carbon number, and is comparable to the width of a linear alkane molecule rather than its length or any average diameter. This suggests that the alkanes have some tendency towards a parallel orientation near the mica surfaces. The measurements give no indication of any strong repulsive component expected from mean-field theories of higher alkanes or polymers. The results of one such theory are presented, and the reasons for its failure to match the experimental data are discussed.

A field model for repairing 3D shapes

This paper proposes a field model for repairing 3D shapes constructed from multi-view RGB data. Specifically, we represent a 3D shape in a Markov random field (MRF) in which the geometric information is encoded by random binary variables and the appearance information is retrieved from a set of RGB images captured at multiple viewpoints. The local priors in the MRF model capture the local structures of object shapes and are learnt from 3D shape templates using a convolutional deep belief network. Repairing a 3D shape is formulated as the maximum a posteriori (MAP) estimation in the corresponding MRF. Variational mean field approximation technique is adopted for the MAP estimation. The proposed method was evaluated on both artificial data and real data obtained from reconstruction of practical scenes. Experimental results have shown the robustness and efficiency of the proposed method in repairing noisy and incomplete 3D shapes.

The determination of the local conditions for void initiation in front of a crack tip for materials with second-phase particles

A procedure is proposed to determine, for second-phase particles near a crack tip, the maximum particle stresses at the moment of void initiation by either particle fracture or particle/matrix interface separation. A digital image analysis system is applied to perform a quantitative analysis of corresponding fracture surface regions from stereo image pairs taken in the scanning electron microscope. The fracture surface analysis is used to measure, for individual particles, the crack tip opening displacement at the moment of void initiation and the particle location with respect to the crack tip. From these data, the stress tensor at the moment of void initiation is calculated from the Hutchinson–Rice–Rosengren (HRR) field theory. The corresponding average local stresses within the particle are evaluated by a non-linear Mori–Tanaka-type approach. These stresses are compared to estimates according to the models by Argon et al. [A.S. Argon, J. Im, R. Safoglu, Metall. Trans. 6 (1975) 825] and Beremin [F.M. Beremin, Metall. Trans. 12 (1981) 723]. The procedure is demonstrated on an Al6061–10% Al2O3 metal matrix composite.

Analytic prediction of structural stress-strain relations of microstructured metal

Nanostructured and ultra-fine grained metals have higher strength but extremely limited ductility compared to coarse grained metals. However, their ductility can be greatly improved by introducing a specific range of grain sizes in the microstructures. In the paper, multiscale unit cell approach (UCA) is developed and applied to predict the averaged stress-strain relations of the multiscale microstructure metals. The unit cell models are three-phase structured at different scale lengths of 100 nm, 1 μm and 10 μm with different volume fractions and periodic boundary conditions. The contributions of multi-scale microstructures to the macroscopic structural properties of metals are also studied using a analytic approach—two-step mean-field method (TSMF), where three microstructural parameters are introduced and thus mechanical properties such as strength and ductility are presented as a function of these parameters. For verification of these proposed numerical and theoretical algorithms, the structural properties of the pure nickel with three-grain microstructures are studied and the results from FEA and the proposed theory have good agreement.

Colloidal interaction between a rigid solid and a fluid drop

We present results of a theoretical study of the effect of surface deformation on a macroscopic system composed of a solid surface interacting with a fluid drop through electrostatic double-layer forces. The analysis involves numerically solving a Laplace equation suitably modified to describe the shape of a liquid drop subjected to a repulsive double-layer force. The latter is evaluated in nonlinear mean-field theory. Some analytical results are also given. The results indicate that although deformation need not be significant on the macroscopic scale, its effect on the interaction is significant and modifies the picture usually presented in DLVO theory. The decay length of the exponential repulsion deviates marginally from the Debye length, dependent on the interfacial tension of the drop. More significantly, at separations where the double-layer force becomes comparable to the internal pressure of the drop, the net force between the two bodies, the local radius of curvature of the drop, and the amount of deformation grow abruptly. The results of this work are relevant to emulsion stability, micelle, vesicle, and cell interactions, and recent experiments on bubble-particle interaction.

Contribution of twinning to low strain deformation in a Mg alloy

Deformation twinning plays an important role in the yielding of extruded magnesium alloys, especially when loaded in compression along the extrusion axis. The magnitude of this contribution is not accurately known. The present study employs electron backscatter diffraction to reveal the influence of grain orientation on twin-volume fraction for alloy AZ31 tested in compression to strains between 0.008 and 0.015. For these strains, it is seen that approximately 45 pct of the deformation can be attributed to "tensile" twinning. The variation of twin-volume fraction over different orientation classes correlates closely with the maximum Schmid factors for both tensile twinning and basal slip. These effects are readily explained quantitatively using a mean field crystal plasticity model without recourse to stochastic effects. Encouraged by this, we introduce an analytical approximation based on the uniformity of (axial) work. © 2013 The Minerals, Metals & Materials Society and ASM International.

Scalable nonparametric Bayesian multilevel clustering

Multilevel clustering problems where the con-tent and contextual information are jointly clustered are ubiquitous in modern datasets. Existing works on this problem are limited to small datasets due to the use of the Gibbs sampler. We address the problem of scaling up multi-level clustering under a Bayesian nonparametric setting, extending the MC2 model proposed in (Nguyen et al., 2014). We ground our approach in structured mean-field and stochastic variational inference (SVI) and develop a tree-structured SVI algorithm that exploits the interplay between content and context modeling. Our new algorithm avoids the need to repeatedly go through the corpus as in Gibbs sampler. More crucially, our method is immediately amendable to parallelization, facilitating a scalable distributed implementation on the Apache Spark platform. We conduct extensive experiments in a variety of domains including text, images, and real-world user application activities. Direct comparison with the Gibbs-sampler demonstrates that our method is an order-of-magnitude faster without loss of model quality. Our Spark-based implementation gains an-other order-of-magnitude speedup and can scale to large real-world datasets containing millions of documents and groups.

Validity and reliability of a voice-recognition game analysis system for field sports

The purpose of this study was to assess the ability of observers to use voice-recognition analysis to accurately classify gait transitions and quantify gait durations typical of team games. Inter-rater and intra-rater reliability was also determined. Four males were filmed performing pre-determined gait protocols, each comprising different sequences of walking, jogging. running and sprinting. Two operators independently classified gait transitions and the time spent in each gait was determined by the voice recognition system. All gait modes as measured by trained observers demonstrated statistically significant correlations (p<O.O I) to predetermined measurement criteria. The mean absolute error for all gait transitions was less than half a second (0.32-0.36 5) with the maximum percentage error being approximately 4% for the walk, jog and run gaits and 10% for sprinting. Gait classification error was low at 1-9%. The intra-rater and inter-rater reliability was consistently high ranging from r =' 0.87 to 0.99. In conclusion, observers using voice-recognition software provided valid measures of time spent in each of the four gait categories with 90% or better accuracy achieved.

Sexual conflict and polyspermy under sperm-limited conditions : in situ evidence from field simulations with the free-spawning marine echinoid Evechinus chloroticus

For free‐spawning organisms that release gametes into the sea, sperm limitation (too few sperm to fertilize all eggs) is a major factor limiting reproductive success. Given such circumstances, the presence of several mechanisms to prevent polyspermy (too many sperm) may seem paradoxical; however, a growing body of data suggests that natural fertilization levels, though variable, can routinely be high. Under such conditions, polyspermy is much more likely. The tension between sperm limitation and polyspermy represents sexual conflict because males, in competing to fertilize as many eggs as possible, can impose lethal costs on eggs if multiple sperm gain entry. Here we present data for a marine invertebrate indicating high levels of polyspermy under sperm‐limited conditions. When the sea urchin Evechinus chloroticus was induced to spawn in situ, mean rates of polyspermy were 17.3% ±3.4%, and polyspermy was recorded at rates as high as 62.7%. Polyspermy was nearly always present, even when fertilization rates were <50%, confirming predictions that it should be present under sperm‐limited conditions. Both sperm limitation and polyspermy imposed substantial reproductive costs, and we conclude that both sexual conflict related to polyspermy and sperm limitation have been simultaneous strong selective forces shaping the evolution of reproductive traits in the sea.

Field metabolic rate and body water turnover of the red fox (Vulpes vulpes) in Australia

We measured the daily energy expenditure of free-living red foxes Vulpes vulpes occupying a temperate region of New South Wales, Australia. Field metabolic rate (FMR) and body water turnover were estimated using doubly labelled water. In autumn, male body mass ranged from 5 to 6.1 kg (mean 5.6 kg) and their FMRs averaged 2328 kJ/day. Female body mass in autumn ranged from 4.9 to 6.6 kg (mean 5.4 kg) and their FMRs averaged 1681 kJ/day. Body water influx for males and females was 314 and 251 mL/day, respectively. Body composition of each fox was analysed after the field measurements and revealed a significant correlation between body water content, as estimated from tritiated water space, and body lipids (r² = 0.72). This supports the use of body water determination as a potentially non-destructive method to gauge body condition.

Sweet talking to ethnic customers : a field experiment on the links between entrepreneurial business planning, cultural sensitivity and sales growth

The purpose of this study was to test whether calculated inclusion of cultural sensitivity in a selected entrepreneurial business planning (EBP) process could increase sales growth in a test market and to explore the implications of a positive answer for the theory and practice of entrepreneurial business planning. Execution of a pretest-posttest control group experimental design measured and compared the implemented effectiveness of a planned entrepreneurial initiative based on cultural sensitivity. Though small in scale and limited in focus, the initiative qualified as an example of entrepreneurial business planning (EBP) and could be used to apply, test and extend aspects of the developing theory in this field of entrepreneurship research. Since the initiative was planned to overcome a culturally-defined impediment to business growth, it also offered opportunity to explore the specific importance of cultural variables in the context of EBP.

A planned sales-promotion was offered to a control group (receiving information in English) and a treatment group (who received the information in the language of ethnic origin). The sixty subjects had been chosen at random from a population of route-trade retailers of defined ethnic origins (Greek, Lebanese and Chinese) and randomly assigned to control and treatment groups. Monthly sales averages of the promoted product were measured before and after treatment. A Chi Square test was used to evaluate the relative proportion of the control and treatment groups who accepted the promotional offer. A two sample t-test procedure and complementary non-parametric Mann-Whitney test were performed to compare the mean sales-performance change of the two groups. Analysis showed that there was a significant increase in mean sales when the planned entrepreneurial initiative was communicated in the relevant language of origin.

The experimental results have specific practical relevance to revitalising the deteriorating route-trade segment of the Australian confectionery market through increasing the sales growth of wholesalers who are prepared to act entrepreneurially and include cultural sensitivity as an element in planning and implementation. By introducing cultural sensitivity as a necessary extension of a plan’s communications role, the results also have general theoretical implications for the developing paradigm of entrepreneurial business planning.

Theories of the policy process in health promotion research: a review

The Ottawa Charter laid the ground work for a new research and practice agenda by urging health promoters to advocate for healthy public policies. After more than 20 years, it is now time to reflect on the state of policy research in health promotion and to examine how rigorously theories are applied. The review of the literature was
conducted on 11 peer-reviewed journals. The journals were selected for their solid track record in publishing health promotion articles and by using a set of predefined
inclusion and exclusion criteria. The articles, published between January 1986 and June 2006, were searched using Medline and CINAHL databases. The selected papers feature search terms related to ‘politics’, ‘policy’, ‘advocacy’ and ‘coalition’. We examined the theoretical grounding of each paper and whether it focuses on policy content (e.g. nature, impact, evolution of the policy), policy processes (e.g. advocacy capacity building and strategies) or theoretical/methodological issues in policy analysis. This review demonstrates that policy research in health promotion is still largely an a theoretical enterprise. Out of the 119 articles that were found eligible, 39 did apply to some degree a theoretical framework, of which 21 referred to a theoretical framework from political science. We conclude that the field has yet to acknowledge critical concepts that would help to shed light on the policy process, and that validated rigorous theoretical frameworks to inform research and practice are hardly applied. Recommendations are formulated to improve policy research in health promotion.

Plane wave scattering by a spherical di-electric particle in motion : a relativistic extension of the Mie theory

Light scattering from small spherical particles has applications in a vast number of disciplines including astrophysics, meteorology optics and particle sizing. Mie theory provides an exact analytical characterization of plane wave scattering from spherical dielectric objects. There exist many variants of the Mie theory where fundamental assumptions of the theory has been relaxed to make generalizations. Notable such extensions are generalized Mie theory where plane waves are replaced by optical beams, scattering from lossy particles, scattering from layered particles or shells and scattering of partially coherent (non-classical) light. However, no work has yet been reported in the literature on modifications required to account for scattering when the particle or the source is in motion relative to each other. This is an important problem where many applications can be found in disciplines involving moving particle size characterization. In this paper we propose a novel approach, using special relativity, to address this problem by extending the standard Mie theory for scattering by a particle in motion with a constant speed, which may be very low, moderate or comparable to the speed of light. The proposed technique involves transforming the scattering problem to a reference frame co-moving with the particle, then applying the Mie theory in that frame and transforming the scattered field back to the reference frame of the observer.

Glaucomatous visual field progression with frequency-doubling technology and standard automated perimetry in a longitudinal prospective study

PURPOSE. To compare frequency-doubling technology (FDT) perimetry with standard automated perimetry (SAP) for detecting glaucomatous visual field progression in a longitudinal prospective study.

METHODS. One eye of patients with open-angle glaucoma was tested every 6 months with both FDT and SAP. A minimum of 6 examinations with each perimetric technique was required for inclusion. Visual field progression was determined by two methods: glaucoma change probability (GCP) analysis and linear regression analysis (LRA). For GCP, several criteria for progression were used. The number of locations required to classify progression with FDT compared with SAP, respectively, was 1:2 (least conservative), 1:3, 2:3, 2:4, 2:6, 2:7, 3:6, 3:7, and 3:10 (most conservative). The number of consecutive examinations required to confirm progression was 2-of-3, 2-of-2, and 3-of-3. For LRA, the progression criterion was any significant decline in mean threshold sensitivity over time in each of the following three visual field subdivisions: (1) all test locations, (2) locations in the central 10° and the superior and inferior hemifields, and (3) locations in each quadrant. Using these criteria, the proportion of patients classified as showing progression with each perimetric technique was calculated and, in the case of progression with both, the differences in time to progression were determined.

RESULTS. Sixty-five patients were followed for a median of 3.5 years (median number of examinations, 9). For the least conservative GCP criterion, 32 (49%) patients were found to have progressing visual fields with FDT and 32 (49%) patients with SAP. Only 16 (25%) patients showed progression with both methods, and in most of those patients, FDT identified progression before SAP (median, 12 months earlier). The majority of GCP progression criteria (15/27), classified more patients as showing progression with FDT than with SAP. Contrary to this, more patients showed progression with SAP than FDT, when analysed with LRA; e.g., using quadrant LRA 20 (31%) patients showed progression with FDT, 23 (35%) with SAP, and only 10 (15%) with both.

CONCLUSIONS. FDT perimetry detected glaucomatous visual field progression. However, the proportion of patients who showed progression with both FDT and SAP was small, possibly indicating that the two techniques identify different subgroups of patients. Using GCP, more patients showed progression with FDT than with SAP, yet the opposite occurred using LRA. As there is no independent qualifier of progression, FDT and SAP progression rates vary depending on the method of analysis and the criterion used.