To the very ground of meaning, to vary the ground of meaning

Parody may be understood as the absorption of a revolutionary impulse into the everyday production of meaning as continuous variation and soft subversion. Considered in this way, parody is transformative because it operates on the components within a system of meaning and/or the context, logic or spatial perspective that grounds the possibility of meaning. It is the conditions under which shared meaning, sense and sensation depend that I aim to unpack in order to suggest the ways in which parody can alter a person’s relationship to the world. By approaching parody as a mode of lived abstraction and as an embodied approach to affective self-organisation, body-environment co-construction and a challenge to identity, it becomes possible to move from formal concerns that have characterised parody to a set of transformative practices. Thus parody indicates where the anchors of embodied, embedded, extended, enacted and affective are dug in and hold identity and the ground of meaning in a steady state. This paper will examine how parody moves from the impulse to overthrow and invert — ‘Beneath the street, The beach’—to a collective impulse that moves the ground of meaning into a reconfigurative process that is allows totalised systems of meaning to collide and intersect. What is left is not the rubble and ruins of meaning but revitalised fragments, stems cells of meaning ready-to-be-remade.A lineage of parodic works will be paraded and discussed that directly address the tacit relation of ground, horizon, orientation and position. This parody parade will form the basis of a critique and the analysis of the ontological orientations that for example, opposing systems of perspective insert as the very ground of meaning. The implication of this line of inquiry leads to the assertion that all descriptions of the world, universe and the cosmos are parodies in search of an origin. Totalised or unified images of the ground of meaning are already parodies of a/the set of conditions by which meaning operates that also produce a trajectory that as a lived-abstraction directs or hijacks subsequent productions of meaning

Inorganic-organic hybrids of the p,p'-diphenylmethylenediphosphinate, pcp2-. synthesis, characterization and XRPD structures of [Sn(pcp)] and [Cu(pcp)]

Two new inorganic-organic polymeric hybrids [Sn(pcp)] and [Cu(pcp)], pcp = CH₂(PhPO₂)₂^2-, have been synthesized and structurally chracterized. The tin derivative has been obtained by reaction of the p,p'-diphenylmethylenediphosphinic acid (H₂pcp) in water with SnCl₂·2H₂O, while the copper derivative has been synthesized through a hydrothermal reaction from the same H₂pcp acid and Cu(O₂CMe)₂·H₂O. The structures of these compounds have been solved "ab initio" by X-ray powder diffraction (XRPD) data. [Sn(pcp)] has a ladder-like polymeric structure, with tin(II) centers bridged by diphenylmethylenediphosphinate ligands, and alternating six- and eight-membered rings. The hemilectic coordination around the metal shows the tin(II) lone pair to be operative, resulting in significant interaction mainly with a C-C bond of one phenyl ring. The [Cu(pcp)] complex displays a polymeric columnar structure formed by two intersecting sinusoidal ribbons of copper(II) ions bridged by the bifunctional phosphinate ligands. The intersections of the ribbons are made of dimeric units of pentacoordinated copper ions. Crystal data for [Sn(pcp)]: monoclinic, space group P2₁Ic, a = 11.2851(1), b = 15.4495(6), c = 8.6830(1) Å, ^β= 107.546(1)°, V = 1443.44(9) Å, Z = 4. Crystal data for [Cu(pcp)]: triclinic, space group P, a = 10.7126(4), b = 13.0719(4), c = 4.9272(3) Å, α= 92.067(5), β= 95.902(7), γ= 87.847(4)°, V = 685.47(7), Z = 2. The tin compound has been characterized by ¹¹⁹Sn MAS NMR (magic-angle spinning NMR), revealing asymmetry in the valence electron cloud about tin. Low-temperature magnetic measurements of the copper compound have indicated the presence of weak antiferromagnetic interactions below 50 K.

Studies on the mechanism of the peroxyoxalate chemiluminescence reaction Part 1. Confirmation of 1,2-dioxetanedione as an intermediate using 13C nuclear magnetic resonance spectroscopy

A simple model peroxyoxalate chemiluminescence system was monitored directly across a range of temperatures (from −80 to +20 °C) using ¹³C nuclear magnetic resonance spectroscopy. These experiments were made possible by the utilisation of ¹³C doubly labelled oxalyl chloride, which was reacted with anhydrous hydrogen peroxide in dry tetrahydrofuran. Ab initio quantum calculations were also performed to estimate the ¹³C nuclear magnetic resonance (NMR) shift of the most commonly postulated key intermediate 1,2-dioxetanedione and this data, in concert with the spectroscopic evidence, confirmed its presence during the reaction.

New light from an old reagent: chemiluminescence from the reaction of potassium permanganate with sodium borohydride

When aqueous sodium borohydride (50 mM) is added to a solution of potassium permanganate (1mM, in sodium hexametaphosphate) at acidic pH, bright red-orange emission is easily visible in a darkened room. This chemiluminescence emission is due to an excited state of manganese (II) that undergoes solution phase phosphorescence and provides an excellent opportunity for students to explore the relationship between the initial oxidation state of the manganese and the likelihood of luminescence. Not surprisingly Mn(VII), Mn(IV) and Mn(III) all give rise to chemiluminescence where as Mn(II) fails to react.

Near-ultraviolet chemiluminescence from the reaction of ammonia with hypobromite in aqueous solution

The chemiluminescence arising from the oxidation of ammonium chloride by sodium hypobromite in aqueous alkaline solution includes a series of peaks in the near-ultraviolet, which is not commonly observed in liquid-phase chemiluminescence. The dominant peak in that region has an intensity maximum at 292 nm and smaller peaks are observed at 313, 334 and 356 nm. The emitted photons are of similar energy to the Vergard–Kaplan transition of molecular nitrogen, a major product of this reaction. However, the spectral distribution is different to that of previously reported gas-phase chemiluminescence attributed to the Vergard–Kaplan transition.

Effect of oxidant type on the chemiluminescence intensity from the reaction of tris(2,2’-biyridyl)ruthenium(III) with various organic acids

An investigation into the chemiluminescence of fourteen organic acids and tris(2,2′-bipyridyl)ruthenium(II) was undertaken. Particular emphasis was placed upon the method of production of the reagent, tris(2,2′-bipyridyl)ruthenium(III), with cerium(IV) sulfate, potassium permanganate, lead dioxide and electrochemical generation. Analytically useful chemiluminescence was observed when Ce(IV) or potassium permanganate were employed as oxidants. The kinetics of analyte oxidation was related to the intensity of the chemiluminescence emission, which increased by three orders of magnitude for tartaric acid after 40 h of oxidation.

Earth bound: the rise and fall of a ground-breaking venture

Earth Sanctuaries Ltd (ESL) intends to offer its entire asset base for sale. ESL's primary objective is to conserve Australia's biodiversity, by breeding and preserving fauna profitably by running sanctuaries, environmental consultancies and related tourist facilities. This "ailing company" is also undergoing a management restructuring and attempting cost reduction. ESL was was one of the first firms to adopt AASB 1037. The implications for the accounting profession are discussed.

Studies on the mechanism of the peroxyoxalate chemiluminescence reaction : part 2, further identification of intermediates using 2D EXSY 13C nuclear magnetic resonance spectroscopy

Further consideration has been given to the reaction pathway of a model peroxyoxalate chemiluminescence system. Again utilising doubly labelled oxalyl chloride and anhydrous hydrogen peroxide, 2D EXSY ¹³C nuclear magnetic resonance (NMR) spectroscopy experiments allowed for the characterisation of unknown products and key intermediate species on the dark side of the peroxyoxalate chemiluminescence reaction. Exchange spectroscopy afforded elucidation of a scheme comprised of two distinct mechanistic pathways, one of which contributes to chemiluminescence. ¹³C NMR experiments carried out at varied reagent molar ratios demonstrated that excess amounts of hydrogen peroxide favoured formation of 1,2-dioxetanedione: the intermediate that, upon thermolysis, has been long thought to interact with a fluorophore to produce light.

Chemiluminescence from the reaction of tin(II) with tris(2,2'-bipyridyl)ruthenium(III)

Unlike many other metal and metalloid ions, tin(II) elicits intense, analytically useful chemiluminescence upon reaction with tris(2,2΄-bipyridyl)ruthenium(III) in acidic aqueous solution. This finding provides new insight into the nature of this widely used reagent and has enabled the first direct, selective determination of a metal ion with tris(2,2΄-bipyridyl)ruthenium(III).

Investigation of the postcure reaction and surface energy of epoxy resins using time-of-flight secondary ion mass spectrometry and contact-angle measurements

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) was used to investigate correlations between the molecular changes and postcuring reaction on the surface of a diglycidyl ether of bisphenol A and diglycidylether of bisphenol F based epoxy resin cured with two different amine-based hardeners. The aim of this work was to present a proof of concept that ToF-SIMS has the ability to provide information regarding the reaction steps, path, and mechanism for organic reactions in general and for epoxy resin curing and postcuring reactions in particular. Contact-angle measurements were taken for the cured and postcured epoxy resins to correlate changes in the surface energy with the molecular structure of the surface. Principal components analysis (PCA) of the ToFSIMS positive spectra explained the variance in the molecular information, which was related to the resin curing and postcuring reactions with different hardeners and to the surface energy values. The first principal component captured information related to the chemical phenomena of the curing reaction path, branching, and network density based on changes in the relative ion density of the aliphatic hydrocarbon and the C₇H₇O⁺ positive ions. The second principal component captured information related to the difference in the surface energy, which was correlated to the difference in the relative intensity of the C_xH_yN_z⁺ ions of the samples. PCA of the negative spectra provided insight into the extent of consumption of the hardener molecules in the curing and postcuring reactions of both systems based on the relative ion intensity of the nitrogen-containing negative ions and showed molecular correlations with the sample surface energy.