Elucidation of bucephalid parasite life-cycles using mutation scanning analysis

Nucleotide variation in a portion of the mitochondrial cytochrome c oxidase subunit1 (cox1) gene from asexual stages of bucephalids of southern Australian scallops (Chlamys asperrima, Chlamys bifrons and Pecten fumatus) was investigated using a mutation scanning–sequencing approach. Single-strand conformation polymorphism (SSCP) analysis revealed three main profile types (A, B and C) for parasites isolated from scallops. Sequence analysis revealed that samples represented by profiles B and C had a high degree (97.3%) of sequence similarity, whereas they were ~21% different in sequence from those represented by profile A. These findings suggested that at least two types or species (represented by profile A, or profile B or C) of bucephalid infect scallops, of which both were detected in South Australia, while only one was found in Victoria. The prevalence of bucephalids (and their SSCP haplotypes) appeared to differ among the three species of scallop in South Australia as well as between the two scallop species in Victoria, indicating a degree of host specificity. Adult bucephalids were collected from Eastern Australian Salmon (Arripis trutta), in an attempt to match them with the asexual stages from the scallop hosts. Neither of the two taxa of adult bucephalid (Telorhynchus arripidis and an un-named Telorhynchus species) shared SSCP profiles with the bucephalids from scallops, but were genetically similar, suggesting that the asexual stages from scallops may represent the genus Telorhynchus. This study, which assessed nucleotide sequence variation in a portion of the mitochondrial cox1 gene for bucephalids found in scallops and arripid fish, illustrates the usefulness of the mutation scanning approach to elucidate complex life-cycles of marine parasites.

Development and application of a microelectrode based scanning voltammetric detector

A large part of the work presented in this thesis describes the development and use of a novel electrochemical detector designed to allow the electrochemical characterisation of compounds in flowing solution by means of cyclic voltammetry. The detector was microprocessor controlled, which provides digital generation of the potential waveform and collection of data for subsequent analysis. Microdisk working electrodes are employed to permit both thermodynamic and kinetically controlled processes to be studied under steady-state conditions in flowing solutions without the distortion or hysteresis normally encountered with larger sized electrodes. The effect of electrode size, potential scan rate, and solution flow rate are studied extensively with the oxidation of ferrocene used as an example of a thermodynamically controlled process and a series of catecholamines as examples of a kinetically controlled process. The performance of the detector was best demonstrated when used as a HPLC post-column detector. The 3-dimensional chromatovoltammograms obtained allow on-line characterisation of each fraction as it elutes from the column. The rest of the work presented in this thesis involves the study of the oxidative degradation pathway of dithranol. The oxidative pathway was shown to involve a complex free radical mechanism, dependent on the presence of both oxygen and, in particular light. The pathway is further complicated by the fact that dithranol may exist in either a keto or enol form, the enol being most susceptible to oxidation. A likely mechanism is proposed from studies performed with cyclic voltammetry and controlled potential electrolysis, then defined by subsequent kinetic studies.

2. Scanning and processing 3D objects for web display

We present a case study of scanning 3D objects for the purposes of education and public information. We begin by describing the original design of a 3D scanning system now in use in Cairo’s Egyptian Museum. The system captures both the geometry and surface color and detail of museum artifacts. We report on the experience using the system in the museum setting, and how practical problems with the system were addressed. We present samples of how the processed 3D data will be used on a web site designed to communicate Egyptian culture.We present a case study of scanning 3D objects for the purposes of education and public information. We begin by describing the original design of a 3D scanning system now in use in Cairo’s Egyptian Museum. The system captures both the geometry and surface color and detail of museum artifacts. We report on the experience using the system in the museum setting, and how practical problems with the system were addressed. We present samples of how the processed 3D data will be used on a web site designed to communicate Egyptian culture.

Investigation of nonisothermal crystallization behaviors of poly and silica nanocomposites using differential scanning calorimetry

Nonisothermal crystallization behaviors of PVA and poly (vinyl alcohol) and Silica (PVA/SiO2) nanocomposites prepared via a self-assembly monolayer (SAM) technique are investigated in this study. Differential scanning calorimetry (DSC) is used to measure the crystallization temperature and enthalpy of PVA and nanocomposites in nitrogen at various cooling rate. The results show that the degree of crystallinity of PVA and nanocomposites decreases when the SiO₂ content increases but increases with an increasing cooling rate. The peak crystallization temperature decreases with an increasing cooling rate.

Silver sulfide as a staining agent for scanning electron microscopy of nylon 6/MXD6 blends

BACKGROUND: In transmission and scanning electron microscopy imaging, the ability to obtain sufficient contrast between the components of a blend when they are both of a similar chemical structure still remains problematic. This paper investigates the domain morphology of a polymer blend containing two polyamides, nylon 6 and the semi-aromatic polyamide poly(m-xylene adipamide) (MXD6), using scanning electron microscopy in backscattered electron imaging mode. The efficiency of three staining agents, ruthenium tetroxide, phosphotungstic acid and silver sulfide, in obtaining optimum phase contrast between the two polymers is discussed.
RESULTS: The use of silver sulfide as a staining agent was found to be a fast and reliable approach which required basic sample preparation and provided excellent compositional contrast between the phases present in the nylon 6/MXD6 blends compared to the other staining agents.
CONCLUSIONS: The technique described in this paper is believed to be a novel and versatile method that has the potential to further improve the ability to study complex polymer blends where one polymer contains an aromatic ring.

Improving nonwoven web quality with a new web scanning device

This thesis presents a novel web scanning device with high processing speed and optical sensitivity and a study of the interrelationships between dimensional parameters and functional properties of nonwovens using such a web scanning device.

Radiation exposure and the justification of computed tomography scanning in an Australian hospital emergency department

In an emergency department (ED), computed tomography (CT) is particularly beneficial in the investigation of high-speed trauma patients. With the advent of multidetector CT (MDCT) scanners, it is becoming faster and easier to conduct scans. In recent years, this has become evident with an increasing number of CT requests. Patients who have multiple CT scans during their hospital stay can receive radiation doses that have an increased theoretical risk of induction of cancer. It is essential that the clinical justification for each CT scan be considered on an individual basis and that due consideration is given to the radiation risk and possible diagnostic benefit. The current lack of a central State or Commonwealth data repository for medical images is a contributing factor to excessive radiation dosage to the population. The principles of justification and radiation risks are discussed in this study.

A surface characterisation and microstructural study by scanning electron microscopy of the N-methyl-n-alkylpyrrolidinium tetrafluoroborate organic salts

A microstructural characterisation of the family of N-methyl-N-alkylpyrrolidinium tetrafluoroborate organic salts was carried out by observation of powder surface morphologies with the aim of extending the microstructure-property correlation. Inherent difficulties limiting extensive studies of organic solids by SEM, including volatility under vacuum, charging due to electron beam irradiation, and air-sensitivity were overcome with the use of a Field Emission SEM and cryostage attachment. This technique, providing considerable improvements in image quality at low accelerating voltages, enabled direct observation of complex microstructural features in samples exhibiting high temperature plastic crystalline phases (N,N-dimethylpyrrolidinium tetrafluoroborate [P11BF4]; N-methyl-N-ethylpyrrolidinium tetrafluoroborate [P12BF4]; N-methyl-N-propylpyrrolidinium tetrafluoroborate [P13BF4]). Extensive lattice imperfections including grain boundaries, slip planes and dislocation pits were observed within particles of approximately 200 mgrm diameter. The N-methyl-N-butylpyrrolidinium tetrafluoroborate (P14BF4) sample in this series revealed columnar single crystals with high aspect ratios. The origin of plastic flow properties is discussed using single crystal and polycrystalline slip observations and a relationship proposed between defect characteristics and transport properties.

Interfacing cell-based assays in environmental scanning electron microscopy using dielectrophoresis

Development of the dielectrophoretic (DEP) live cell trapping technology and its interfacing with the environmental scanning electron microscopy (ESEM) is described. DEP microelectrode arrays were fabricated on glass substrate using photolithography and lift-off. Chip-based arrays were applied for ESEM analysis of DEP-trapped human leukemic cells. This work provides proof-of-concept interfacing of the DEP cell retention and trapping technology with ESEM to provide a high-resolution analysis of individual nonadherent cells.

Environmental scanning literature - past, present and future research propositions

The purpose of this paper is to establish research propositions that can potentially fill research gaps in the literature of environmental scanning. Major databases such as ABI/INFORM, and Emerald have been searched to gather literature. The literature on environmental scanning is reviewed with an aim to identify patterns in scanning practices as well as research gaps in the extant literature. Three major phases of the development and three main characteristics of the literature have been identified. Four propositions are suggested to fill the research gaps in the literature of the environmental scanning practices; namely, firm characteristics, market orientation, and top management cognition perspective. Further empirical research is needed to test the four propositions in order to provide a full picture for the environmental scanning literature. The contributions of this paper are: 1) the revelation of the evolution of the environmental scanning literature; 2) the identification of research gaps in the environmental scanning literature; 3) the establishment of propositions through which future research can further the knowledge of environmental scanning.

ID scanning, the media and the politics of urban surveillance in an Australian regional city

Computerised ID scanning technologies have permeated many urban night-time economies in Australia, the United States, Canada and the United Kingdom. This paper documents how one media organisation’s overt and tacit approval of ID scanners helped to normalise this form of surveillance as a precondition of entry into most licensed venues in the Australian city of Geelong. After outlining how processes of governance “from above” and “from below” interweave to generate distinct political and media demands for strategies to prevent localised crime problems, a chronological reconstruction of media reports over a three-and-a half year period demonstrates how ID scanning became the centrepiece of a holistic reform strategy to combat alcohol-related violence in this nightclub precinct. Several discursive techniques helped to normalise this “technological fix”, while suppressing critical discussion of viable concerns over information privacy, data security and system networking. These
included pairing reports of an initial “signal crime” with examples of “virtual victimhood” to stress the urgency of a radical surveillance-based response, which was supported by anecdotal statements from key “primary definers” highlighting the success of this initiative in targeting a wider population of antisocial “others”. The implications of these reporting practices are discussed in light of the media’s central role in reforming the Geelong night-time economy and broader trends in using novel surveillance technologies to combat urban crime problems at the expense of alternative measures that protect individual liberty.

Measuring the adhesion force on natural fibre surface using scanning probe microscopy

This work has focused on measuring the adhesion forces on both untreated and atmospheric helium plasma treated single jute fibre surfaces using scanning probe microscopy (SPM). The measurements were conducted on three differently aged surfaces for one week, three weeks and six weeks using a standard silicon nitride tip in force-volume (f-v) mode. Up to 256 adhesion data points were collected from various locations on the surface of the studied fibres using in-house developed software and the resulting data were statistically analysed by the histogram method. Results obtained from this analysis method were found to be very consistent with a small statistical variation. The work of adhesion, Wa, was calculated from measured adhesion force using the Johnson–Kendall–Roberts (JKR) and Derjaguin–Muller–Toporov (DMT) models. Increases in both adhesion force and work of adhesion were observed on jute fibre with certain levels of atmospheric plasma treatment and ageing time.