Improvement of adhesion of conductive polypyrrole coating on wool and polyester fabrics using atmospheric plasma treatment

In this paper wool and polyester fabrics were pretreated with atmospheric plasma glow discharge (APGD) to improve the ability of the substrate to bond with anthraquinone-2-sulfonic acid doped conducting polypyrrole coating. A range of APGD gas mixtures and treatment times were investigated. APGD treated fabrics were tested for surface contact angle, wettability and surface energy change. Effect of the plasma treatment on the binding strength was analyzed by studying abrasion resistance, surface resistivity and reflectance. Investigations showed that treated fabrics exhibited better hydrophilicity and increased surface energy. Surface treatment by an APGD gas mixture of 95% helium/5% nitrogen yielded the best results with respect to coating uniformity, abrasion resistance and conductivity.

Simulation of the solar adsorption refrigeration operating at near atmospheric pressure

To solve the leaking problem faced by current vacuum adsorption refrigeration systems, the authors have carried out a series of studies on the concept of raising the system's pressure to around atmospheric pressure with an inert gas (eg. Helium) as the pressure-adjusting agent. This paper presents the simulation of the performance oj the activated carbon-methanol adsorption refrigeration operating at near atmospheric pressure powered by solar energy. This simulation can be refereed in the prototype design.

Effects of atmospheric pressure plasma on dye uptake by the surface of wool

A woven pure wool fabric has been exposed to atmospheric pressure plasma for 30 seconds using a pilot-scale. commercial machine. X-ray photoelectron spectral data revealed large increases in oxygen and nitrogen. and a large reduction in carbon. on the surfaces of the plasma-treated fibres. A CIN ratio of 3.55 for plasma-treated wool was consistent with removal of the covalently-bound fatty acids from the surface of the cuticle cells. resulting in exposure of the proteinaceous epicuticle. Dye staining experiments revealed that the back of the fabric had received the same, uniform level of treatment as the face, despite the fact that only the face had been directly exposed to the plasma. Dyes (1 % oww) were applied to fabric at 50°C (liquor ratio =40: 1) and pH values from 3 to 6. The relatively low temperature of 50°C was selected in order to accentuate the effects of plasma on the rate of dye uptake. Under these conditions, dye was adsOibed onto the fibre surfaces, with very little penetration into the fibres. Effects of the plasma treatment on the rate of dyes adsorption were dyespecific. No significant effects of plasma on the rate of dye uptake were observed with relatively hydrophobic dyes, but hydrophilic dyes were adsorbed more rapidly by the plasmatreated fabric. It would appear that for more hydrophobic dyes, hydrophobic effects are more important for the adsorption of dyes by the plasma-treated fibres, even though these fibres were quite hydrophilic. On the other hand. it is concluded that for more hydrophilic dyes, electrostatic effects are more important for adsorption by the plasma-treated fibre.

Influence of helium atmospheric plasma treatment on surface and fracture-mechanical behaviour of quickstepTM cured bio-composites

This work investigated the potential of improving flexural properties of natural fiber (jute) reinforced biocomposites by atmospheric pressure helium plasma treatment. Composites were made by the use of combined hand lay-up and vacuum bagging technique followed by newly developed Australia patented Quickstep^TM curing. The physical properties of helium plasma modified fibers were investigated by means of wettability time, coefficient of friction (COF), atomic force microscopy (AFM) and chemical nature of the surface with ATR-FTIR and XPS. There was found a logical correlation between physical and chemical characteristics of the surface of fiber with the fracture mechanical behavior of their resulting biocomposites. In addition, the use of helium atmospheric plasma treatment prior to Quickstep^TM process has proved to be a potential way to positively alter the fracture-mechanical behavior of biocomposites. This study will lead to new commercial applications of natural fiber jute for the composite industry that go beyond wrapping and packaging.

Stochastic atmospheric assistance and the use of emergency staging sites by migrants

Numerous animals move vast distances through media with stochastic dynamic properties. Avian migrants must cope with variable wind speeds and directions en route, which potentially jeopardize fine-tuned migration routes and itineraries. We show how unpredictable winds affect flight times and the use of an intermediate staging site by red knots (Calidris canutus canutus) migrating from west Africa to the central north Siberian breeding areas via the German Wadden Sea. A dynamic migration model incorporating wind conditions during flight shows that flight durations between Mauritania and the Wadden Sea vary between 2 and 8 days. The number of birds counted at the only known intermediate staging site on the French Atlantic coast was strongly positively correlated with simulated flight times. In addition, particularly light-weight birds occurred at this location. These independent results support the idea that stochastic wind conditions are the main driver of the use of this intermediate stopover site as an emergency staging area. Because of the ubiquity of stochastically varying media, we expect such emergency habitats to exist in many other migratory systems, both airborne and oceanic. Our model provides a tool to quantify the effect of winds and currents en route.

Concentrations of major grass group 5 allergens in pollen grains and atmospheric particles : implications for hay fever and allergic asthma sufferers sensitized to grass pollen allergens

Background

Grass pollen allergens are the most important cause of hay fever and allergic asthma during summer in cool temperate climates. Pollen counts provide a guide to hay fever sufferers. However, grass pollen, because of its size, has a low probability of entering the lower airways to trigger asthma. Yet, grass pollen allergens are known to be associated with atmospheric respirable particles.
Objective

We aimed (1) to determine the concentration of group 5 major allergens in (a) pollen grains of clinically important grass species and (b) atmospheric particles (respirable and nonrespirable) and (2) to compare the atmospheric allergen load with clinical data to assess different risk factors for asthma and hay fever.
Methods

We have performed a continuous 24 h sampling of atmospheric particles greater and lower than 7.2 μm in diameter during the grass pollen season of 1996 and 1997 (17 October 1996–16 January 1997) by means of a high volume cascade impactor at a height of about 15 m above ground in Melbourne. Using Western analysis, we assessed the reactivity of major timothy grass allergen Phl p 5 specific monoclonal antibody (MoAb) against selected pollen extracts. A MoAb-based ELISA was then employed to quantify Phl p 5 and cross-reactive allergens in pollen extracts and atmospheric particles larger and smaller than 7.2 μm.
Results

Phl p 5-specific MoAb detected group 5 allergens in tested grass pollen extracts, indicating that the ELISA employed here determines total group 5 allergen concentrations. On average, 0.05 ng of group 5 allergens were detectable per grass pollen grain. Atmospheric group 5 allergen concentrations in particles > 7.2 μm were significantly correlated with grass pollen counts (rs = 0.842, P < 0.001). On dry days, 37% of the total group 5 allergen load, whereas upon rainfall, 57% of the total load was detected in respirable particles. After rainfall, the number of starch granule equivalents increased up to 10-fold; starch granule equivalent is defined as a hypothetical potential number of airborne starch granules based on known pollen count data. This indicates that rainfall tended to wash out large particles and contributed to an increase in respirable particles containing group 5 allergens by bursting of pollen grains. Four day running means of group 5 allergens in respirable particles and of asthma attendances (delayed by 2 days) were shown to be significantly correlated (P < 0.001).
Conclusion

Here we present, for the first time, an estimation of the total group 5 allergen content in respirable and nonrespirable particles in the atmosphere of Melbourne. These results highlight the different environmental risk factors for hay fever and allergic asthma in patients, as on days of rainfall following high grass pollen count, the risk for asthma sufferers is far greater than on days of high pollen count with no associated rainfall. Moreover, rainfall may also contribute to the release of allergens from fungal spores and, along with the release of free allergen molecules from pollen grains, may be able to interact with other particles such as pollutants (i.e. diesel exhaust carbon particles) to trigger allergic asthma.

Immunologic significance of respirable atmospheric starch granules containing major birch allergen Bet v 1

Background: Birch-pollen allergens are an important cause of early spring hay fever and allergic asthma. Recently, we reported a mechanism for the release of respirable allergenic particles from birch pollen containing the major allergen Bet v 1. In this study, we aimed to assess the immunologic significance of the released Bet v 1-containing starch granules in the environment.

Methods: A two-site monoclonal antibody-based assay (ELISA) was employed to quantitate Bet v 1 in high-volume air sampler filter extracts, and immunogold-labelling was used on sections of these extracts to localize Bet v 1. Immunoblot analyses were performed with pooled sera from patients sensitive to birch pollen.

Results: Atmospheric starch granules contained Bet v 1, and the concentration increased upon light rainfall. Sera from patients allergic to birch allergens recognized extracts from isolated starch granules.

Conclusions: The clinical implications of these findings are that starch granules released from birch pollen are potentially able to trigger allergic asthmatic reactions to Bet v 1, since the allergen occurs in respirable particles. Thus, clinicians can advise asthma patients to remain indoors on days of light rainfall during the birch-pollen season to avoid high levels of allergen exposure.

Atmospheric news stinger

A stinger made on synths.