Drifting or walking? colonisation routes used by different instars and species of lotic, macroinvertebrate filter feeders

Many views of stream invertebrate populations centre on drift as the major route of larval dispersal, but few studies have presented unambiguous information about the role of drift. We present the results from an experiment designed to determine whether the major route of colonisation of substrata by hydropsychid larvae (commonly found in the drift) is by drifting directly onto substrata or by walking along the stream bottom. The experimental design contained four treatments: substrata open to drifters and walkers; fenced substrata open to drifters only; and two treatments open to drifters and walkers that provided forms of fence controls. Fifteen replicates of each treatment were set out at random locations within a riffle at each of three sites, with each site on a different river (the Little River, the Steavenson River and the Acheron River) in the Acheron River catchment. The experiment was run twice, once during autumn (April 1999) and once during early summer (January 2000). Both experiments were colonised by three species of hydropsychids, Asmicridea sp. AV1, and Smicrophylax sp. AV1 and AV2. We found that 2nd/3rd instars of Asmicridea sp. AV1 walked as well as drifted, whereas all others primarily drifted. No relation between numbers of recruits and water speed was found when substrata were open only to drifters, whereas substrata open also to walkers gained more recruits in faster flows. Additionally, larvae more frequently abandoned nets in slow than fast flows, indicating that drifting into unfavourable flow environments may result in mortality or redispersal of larvae. These findings demonstrate that, although drift is important, it is not necessarily the only method used by hydropsychids to colonise substrata. Larvae may have more capacity to choose substrata in fast flows when they colonise substrata by walking. Spot measures of hydropsychid distribution cannot distinguish between these explanations. The finding that walkers can sometimes comprise significant numbers of recruits raises the prospect that hydropsychids can be sourced locally and have not inevitably drifted in from upstream locations.

Novel routes to new chiral rings and cages

The successful synthesis and characterisation of a series of new chiral cages was achieved through the use of a BINOL backbone linked to a variety of organotin carboxylates. These novel chiral cages may ultimately find use as catalysts in reaction syntheses for the pharmaceutical industry.

(Un)safe routes : maternal mortality and Ethiopia's development agenda

This study juxtaposed women's experiences of birth at home in rural Ethiopia where it is 'safe' with that in a modern health care setting where it is 'unsafe' because the distance from international maternal health policy to its implementation is vast and the 'pathway to maternal survival' can be circuitous.

Many routes lead to Rome : potential causes for the multi-route migration system of Red Knots, Calidris canutus islandica

Migrants, such as birds or representatives of other taxa, usually make use of several stopover sites to cover the distance between their site of origin and destination. Potentially, multiple routes exist, but often little is known about the causes and consequences of alternative migration routes. Apart from their geographical distribution, the suitability of potential sites might play an important role in the animals’ decisions for a particular itinerary. We used an optimal-migration model to test three nonmutually exclusive hypotheses leading to variations in the spring migration routes of a subspecies of Red Knot, Calidris canutus islandica, which migrates from wintering grounds in Western Europe to breeding grounds in Greenland and the Canadian Arctic: the breeding location hypothesis, the energy budget hypothesis, and the predation risk hypothesis. Varying only breeding location, the model predicted that birds breeding in the Canadian Arctic and on West Greenland stop over on Iceland, whereas birds breeding in East and Northeast Greenland migrate via northern Norway, a prediction that is supported by empirical findings. Energy budgets on stopover sites had a strong influence on the choice of route and staging times. Varying foraging-intensity and mass-dependent predation risk prompted the birds to use less risky sites, if possible. The effect of simultaneous changes in the energy budget and predation risk strongly depended on the site where these occurred. Our findings provide potential explanations for the observations that C. canutus islandica uses a diverse array of migration routes. Scrutinizing the three alternative driving forces for the choice of migratory routes awaits further, specific data collection in rapidly developing fields of research (e.g., predation risk assessment, GPS tracking). Generally, the type of modeling presented here may not only highlight alternative explanations, but also direct follow-up empirical research.

Fidelity to foraging sites, consistency of migration routes and habitat modulation of home range by sea turtles

Aim  Resources can shape patterns of habitat utilization. Recently a broad foraging dichotomy between oceanic and coastal sites has been revealed for loggerhead sea turtles (Caretta caretta). Since oceanic and coastal foraging sites differ in prey availability, we might expect a gross difference in home-range size across these habitats. We tested this hypothesis by equipping nine adult male loggerhead sea turtles with GPS tracking devices. Location  National Marine Park of Zakynthos (NMPZ) Greece, central and eastern Mediterranean (Adriatic, Ionian and Aegean seas). Methods  In 2007, 2008 and 2009, Fastloc GPS-Argos transmitters were attached to nine male loggerheads. In addition, a Sirtrack PTT unit was attached to one male in 2007. Four of the turtles were tracked on successive years. We filtered the GPS data to ensure comparable data volumes. Route consistency between breeding and foraging sites of the four re-tracked turtles was conducted. Foraging site home range areas and within site movement patterns were investigated by the fixed kernel density method. Results  Foraging home range size ranged between circa 10 km2 at neritic habitats (coastal and open-sea on the continental shelf) to circa 1000 km2 at oceanic sites (using 90% kernel estimates), the latter most probably reflecting sparsely distributed oceanic prey. Across different years individuals did not follow exactly the same migration routes, but did show fidelity to their previous foraging sites, whether oceanic or neritic, with accurate homing in the final stages of migration. Main conclusions  The broad distribution and diverse life-history strategies of this population could complicate the identification of priority marine protected areas beyond the core breeding site.

Controlled modification of the inorganic and organic bricks in an Al-based MOF by direct and post-synthetic synthesis routes

Four new porous CAU-1 derivatives CAU-1–NH2 ([Al4(OH)2(OCH3)4(BDC–NH2)3]·xH2O, BDC–NH22− = aminoterephthalate), CAU-1–NH2(OH) ([Al4(OH)6(BDC–NH2)3]·xH2O), CAU-1–NHCH3 ([Al4(OH)2(OCH3)4(BDC–NHCH3)3]·xH2O) and CAU-1–NHCOCH3 ([Al4(OH)2(OCH3)4(BDC–NHCOCH3)3]·xH2O) all containing an octameric [Al8(OH)4+y(OCH3)8−y]12+ cluster, with y = 0–8, have been obtained by MW-assisted synthesis and post-synthetic modification. The inorganic as well as the organic unit can be modified. Heteronuclear 1H–15N, 1H–13C and homonuclear 1H–1H connectivities determined by solid-state NMR spectroscopy prove the methylation of the NH2 groups when conventional heating is used. Varying reaction times and temperatures allow controlling the degree of methylation of the amino groups. Short reaction times lead to non-methylated CAU-1 (CAU-1–NH2), while longer reaction times result in CAU-1–NHCH3. CAU-1–NH2 can be modified chemically by using acetic anhydride, and the acetamide derivative CAU-1–NHCOCH3 is obtained. Thermal treatment permits us to change the composition of the Al-containing unit. Methoxy groups are gradually exchanged by hydroxy groups at 190 °C in air. Solid-state NMR spectra unequivocally demonstrate the presence of the amino groups, as well as the successful post-synthetic modification. Furthermore 1H–1H correlation spectra using homonuclear decoupling allow the orientation of the NHCOCH3 groups within the pores to be unravelled. The influence of time and temperature on the synthesis of CAU-1 was studied by X-ray powder diffraction, elemental analyses, and 1H liquid-state NMR and IR spectroscopy.

An issues paper: the roots/routes of Australian architecture: elements of an alternative architectural history

The dynamism and mobility of architects in their approach to architecturaldesign practice provides a context that emphasises that architecture, likeculture, is not static or rooted in place, but is intricately configured throughthe dual processes of locality and mobility – both physical and theoretical. Theproduction of architecture in Australia, as in other immigrant-rich societies,provides a case for reinforcing the theory that architectural mobility and travelare integral to the architecture of place.This issues paper sets out to re-examine the contribution of geo-culturalinfluences upon Australia’s architectural lineage and considers a diverse rangeof themes across an equally broad timeframe; British colonial transpositions; thedissemination of Modernism in Australia; the latent contribution of mid-twentiethcentury European émigré architects; and the secreted history of Australia’sAsian architecture. Common to all, however, is the notion of architecturaltranslation as a process of influences transmitted, transposed or adapted toother contexts. It uses Australia as the focus from which to consider how globalcriticism, ideas and theories have travelled and continue to travel transverselyacross time and place, from the late-eighteenth century well into the twenty-first.This paper investigates translations through narratives, processes, networks andtraces of architectural manifestations and begins to draw lines of influence.

New walking and cycling routes and increased physical activity: one- and 2-year findings from the UK iConnect study

We evaluated the effects of providing new high-quality, traffic-free routes for walking and cycling on overall levels of walking, cycling, and physical activity.

Prediction of pedestrians routes within a built environment in normal conditions

Modelling and prediction of pedestrian routing behaviours within known built environments has recently attracted the attention of researchers across multiple disciplines, owing to the growing demand on urban resources and requirements for efficient use of public facilities. This study presents an investigation into pedestrians' routing behaviours within an indoor environment under normal, non-panic situations. A network-based method using constrained Delaunay triangulation is adopted, and a utility-based model employing dynamic programming is developed. The main contribution of this study is the formulation of an appropriate utility function that allows an effective application of dynamic programming to predict a series of consecutive waypoints within a built environment. The aim is to generate accurate sequence waypoints for the pedestrian walking path using only structural definitions of the environment as defined in a standard CAD format. The simulation results are benchmarked against those from the A* algorithm, and the outcome positively indicates the usefulness of the proposed method in predicting pedestrians' route selection activities. © 2014 Elsevier Ltd. All rights reserved.

The role of thermomechanical routes on the distribution of grain boundary and interface plane orientations in transformed microstructures

In the current study, a series of thermomechanical routes were used to produce different microstructures (i.e., ferrite and martensite) in low-carbon low alloy steels. The five-parameter grain boundary character distribution was measured for all microstructures. The thermomechanical processing route altered the texture of the fully ferritic microstructure and significantly influenced the anisotropy of the grain boundary character distribution. Generally, the population of (111) planes increased with an increase in the γ-fiber texture for the ferritic microstructure, but it did not change the shape of the grain boundary plane distribution at specific misorientations. The most commonly observed boundaries in the fully ferritic structures produced through different routes were {112} symmetric tilt boundaries with the Σ3 = 60 deg/[111] misorientation; this boundary also had a low energy. However, the grain boundary plane distribution was significantly changed by the phase transformation path (i.e., ferrite vs martensite) for a given misorientation. In the martensitic steel, the most populous Σ3 boundary was the {110} symmetric tilt boundary. This results from the crystallographic constraints associated with the shear transformation (i.e., martensite) rather than the low-energy interface that dominates in the diffusional phase transformation (i.e., ferrite).