The four national taps of Singapore: a holistic approach to water resources management from drainage to drinking water

 Water resources in Singapore are managed following the principles of a closed loop hydrologic cycle by one agency, the Public Utility Board (PUB), which promotes its management philosophy through the Four National Taps of Singapore program. The four national taps are: water from local catchment areas; imported water (from Malaysia); reused water (known as NEWater); and desalinated water. Given the uncertainty of water imports, the remaining three national taps have become increasingly important and this paper begins with a general overview of the innovative programs implemented by PUB in support of these three taps. Stormwater runoff is captured from two-thirds of Singapore’s land area and stored in reservoirs for subsequent use. Stormwater management is an important component of the catchment area tap and extensive low impact development (LID) implementation has become a priority through the ABC (Active, Beautiful, Clean) Waters Program. Examples of several ABC Waters projects are discussed. NEWater currently supplies 30% of the country’s demand and this is projected to increase to 50% by 2060. NEWater plants take treated wastewater through the additional steps of microfiltration, reverse osmosis and ultraviolet treatment for use primarily in industry, although a portion also is blended into the municipal reservoirs. Singapore’s single desalination plant currently meets 10% of its demand, with a second plant to be completed in 2013 that will more than double production. Also discussed are the results of recently completed pilot projects related to stormwater management including testing of E. coli in runoff from high density residential areas, a blind taste test and survey on acceptance of NEWater, and a survey of Singaporean understanding about stormwater management issues.Water resources in Singapore are managed following the principles of a closed loop hydrologic cycle by one agency, the Public Utility Board (PUB), which promotes its management philosophy through the Four National Taps of Singapore program. The four national taps are: water from local catchment areas; imported water (from Malaysia); reused water (known as NEWater); and desalinated water. Given the uncertainty of water imports, the remaining three national taps have become increasingly important and this paper begins with a general overview of the innovative programs implemented by PUB in support of these three taps. Stormwater runoff is captured from two-thirds of Singapore’s land area and stored in reservoirs for subsequent use. Stormwater management is an important component of the catchment area tap and extensive low impact development (LID) implementation has become a priority through the ABC (Active, Beautiful, Clean) Waters Program. Examples of several ABC Waters projects are discussed. NEWater currently supplies 30% of the country’s demand and this is projected to increase to 50% by 2060. NEWater plants take treated wastewater through the additional steps of microfiltration, reverse osmosis and ultraviolet treatment for use primarily in industry, although a portion also is blended into the municipal reservoirs. Singapore’s single desalination plant currently meets 10% of its demand, with a second plant to be completed in 2013 that will more than double production. Also discussed are the results of recently completed pilot projects related to stormwater management including testing of E. coli in runoff from high density residential areas, a blind taste test and survey on acceptance of NEWater, and a survey of Singaporean understanding about stormwater management issues.

Domestic drinking water in rural areas : are water tanks on farms a health hazard?

The aim of the research was to gain a better understanding of the relationship between drinking water quality, householders' knowledge and maintenance practices of private water supplies and drinking water-related public health risk on farms. Samples of drinking water were taken from 100 farming households. The Colilert-18 method was used for the detection of total coliforms and Escherichia coli (E. coli) as indicators of water quality. Each household completed a questionnaire about their knowledge and practices relating to a safe water supply. Coliforms were present in 52 water samples and E. coli was present in 38. Seven households reported minor illnesses in the previous three months and two households reported gastroenteritis. Some tank maintenance occurred in 86 households, but tank maintenance activities varied considerably. Four of the households had published guidelines on water quality. None of the participating households had their drinking water tested regularly. There was no obvious relationship between drinking water quality, householder knowledge, maintenance practices and drinking water-related health risk on farms.

Performance evaluation and improved risk control philosophies for drinking water systems

World-wide, water is the single most used substance by humans every day. Water is also the major cause of illness and death in many countries including the affluent nations. Through this research, new risk control philosophies from catchment to consumers are highlighted. This thesis is about identifying the hazards, evaluating the risks and implementing controls to protect public health from drinking water.

Chlorine decay and biofilm growth in tropical drinking water distribution systems - a case study for Townsville

Water quality modelling is becoming increasingly popular in the water industry due to its applications in drinking water and treated wastewater reuse. Microbial growth and disinfectant decay are the two most important factors to be considered in drinking water if they are to comply with stringent guidelines imposed by relevant water regulatory authorities. In the case of drinking water, an optimum level of disinfectant is an important criterion to have pathogen free water with minimal disinfectant by products (DBPs) below the acceptable levels.

Prediction of chlorine and THMs concentration profile in bulk drinking water distribution systems from laboratory data

Nearly all drinking water distribution systems experience a "natural" reduction of disinfection residuals. The most frequently used disinfectant is chlorine, which can decay due to reactions with organic and inorganic compounds in the water and by liquid/solids reaction with the biofilm, pipe walls and sediments. Usually levels of 0.2-0.5 mg/L of free chlorine are required at the point of consumption to maintain bacteriological safety. Higher concentrations are not desirable as they present the problems of taste and odour and increase formation of disinfection by-products. It is usually a considerable concern for the operators of drinking water distribution systems to manage chlorine residuals at the "optimum level", considering all these issues. This paper describes how the chlorine profile in a drinking water distribution system can be modelled and optimised on the basis of readily and inexpensively available laboratory data. Methods are presented for deriving the laboratory data, fitting a chlorine decay model of bulk water to the data and applying the model, in conjunction with a simplified hydraulic model, to obtain the chlorine profile in a distribution system at steady flow conditions. Two case studies are used to demonstrate the utility of the technique. Melbourne's Greenvale-Sydenham distribution system is unfiltered and uses chlorination as its only treatment. The chlorine model developed from laboratory data was applied to the whole system and the chlorine profile was shown to be accurately simulated. Biofilm was not found to critically affect chlorine decay. In the other case study, Sydney Water's Nepean system was modelled from limited hydraulic data. Chlorine decay and trihalomethane (THM) formation in raw and treated water were measured in a laboratory, and a chlorine decay and THM model was derived on the basis of these data. Simulated chlorine and THM profiles agree well with the measured values available. Various applications of this modelling approach are also briefly discussed.

Efficient management of drinking water distribution systems through the application of water quality modeling

The quality of drinking water generally degrades when it is delivered through a distribution system due to the decay of disinfectant, which subsequently allows the re-growth of microorganisms in the distribution system. A model that describes the changes that occur in the water quality in distribution system is needed to determine whether to enhance the treatment processes or to improve the distribution system so that microbiological criteria are met. This paper describes how chlorine decay kinetics are modeled and the model output is used in finding the elements that are contributing to the consumption of chlorine at the treatment plant other than the water itself; this allows better control of chlorine dosing at the treatment plant, which in tum will reduce the formation of disinfectant by-products. In addition, the model will accurately predict the decay due to the organic/inorganic and nitrogenous compounds that are remaining in the water at any point in the distribution system, which will indicate the status of the distribution system with respect to its chlorine consumption. Further, if re-chlorination is introduced in the distribution system downstream of the treatment plant, the model will predict the chlorine decay due to the slow reacting organic and nitrogenous compounds accurately.

Water quality modelling for drinking water distribution systems

A dynamic water quality model for drinking water distribution systems has been developed in this study, to include processes that occur in the bulk water, as well as those occurring in the biofilm of a distribution system. The model has been validated against water quality data obtained from extensive experimental studies conducted with biofilm reactors. Protein and carbohydrate densities in the biofilm represent biofilm biomass. This model is able to predict the disinfectant decay due to organic matter in the bulk water, as well as that due to biofilm. It simultaneously predicts the growth of biofilm in terms of carbohydrate and protein densities. While this model is complex enough to describe the water quality changes in a distribution system, it is also simple enough to be incorporated into a hydraulic model in order to describe the interaction between disinfectant and microbiological quality throughout a drinking water distribution system.

Corrosion impact on drinking water distribution systems : a review and future research direction

At present water treatment and distribution is of high priority to ensure that communities have access to safe and affordable drinking water. Current information states that in the United States a total annual cost of $36 billion (US) is spent replacing aging infrastructure, lost water from unaccounted-for leaks, corrosion inhibitors, internal mortar linings, external coatings, and cathodic protection as a result of corrosion. In order to reduce the cost incurred as a result of corrosion in the water distribution industry, it is essential that better corrosion management and preventative strategies are implemented. However through investigation of research previously undertaken by others, it was found that there was a lack of study of corrosion within distribution systems in the tropics taking into account the related seasonal temperature variations. To assist in the development of management strategies to improve the outcomes of drinking water distribution systems, the authors propose to implement a pilot study involving the installation of a corrosion reactor based on standard corrosion assessment technologies in a water distribution system located in the tropics.

Prediction of chlorine and trihalomethanes concentration profile in bulk drinking water distribution systems from laboratory data

Nearly all drinking water distribution systems experience a "natural" reduction of disinfection residuals. The most frequently used disinfectant is chlorine, which can decay due to reactions with organic and inorganic compounds in the water and by liquid/solids reaction with the biofilm, pipe walls and sediments. Usually levels of 0.2-0.5 mg/L of free chlorine are required at the point of consumption to maintain bacteriological safety. Higher concentrations are not desirable as they present the problems of taste and odour and increase formation of disinfection by-products. It is usually a considerable concern for the operators of drinking water distribution systems to manage chlorine residuals at the "optimum level", considering all these issues. This paper describes how the chlorine profile in a drinking water distribution system can be modelled and optimised on the basis of readily and inexpensively available laboratory data. Methods are presented for deriving the laboratory data, fitting a chlorine decay model of bulk water to the data and applying the model, in conjunction with a simplified hydraulic model, to obtain the chlorine profile in a distribution system at steady flow conditions. Two case studies are used to demonstrate the utility of the technique. Melbourne's Greenvale-Sydenham distribution system is unfiltered and uses chlorination as its only treatment. The chlorine model developed from laboratory data was applied to the whole system and the chlorine profile was shown to be accurately simulated. Biofilm was not found to critically affect chlorine decay. In the other case study, Sydney Water's Nepean system was modelled from limited hydraulic data. Chlorine decay and trihalomethane (THM) formation in raw and treated water were measured in a laboratory, and a chlorine decay and THM model was derived on the basis of these data. Simulated chlorine and THM profiles agree well with the measured values available. Various applications of this modelling approach are also briefly discussed.

Evaluation of chlorine decay kinetics expressions for drinking water distribution systems modelling

The decay of chlorine in drinking water involves a complex set of reactions that is usually simplified to first order kinetics in models of water quality in distribution systems. However, to be useful in optimising chlorine dosing regimes, the kinetics expression should accurately describe the shape of the chlorine decay curve for different chlorine doses and be able to simulate re-chlorination. After considering the nature of the reactions involved in chlorine decay, five simplified reaction schemes were evaluated for their suitability to describe chlorine concentration in bulk water. Each scheme was fitted to a sample of experimental data of chlorine decay in raw water obtained from Warragamba Dam (the major source of water supplied to Sydney, Australia). A scheme involving two parallel reactions of organic carbon compounds with chlorine is both necessary and sufficient to satisfy the requirements of modelling chlorine decay accurately.

Evaluating the drinking water quality through an efficient chlorine decay model

The performance of a treatment plant in reducing chlorine consuming substances as well as total trihalomethane formation (TTHM) could be evaluated rapidly using an accurate chlorine decay model as used in this study. The model could estimate the concentrations of fast and slow reacting agents (FRA and SRA–including organic and inorganic substances) and fast and slow reacting nitrogenous compounds (FRN and SRN) that are present in test waters. By estimating those concentrations in source and treated waters one could evaluate the performance of the treatment plant as well as provide options such as better catchment management for source water protection or treatment upgrades (e.g. enhanced coagulation) to remove chlorine consuming compounds which also have the potential to form THMs.

Modeling bacterial growth in drinking water : effect of nutrients

This article presents a model of growth of naturally occurring heterotrophic bacteria in the bulk water phase in the absence of disinfectant. The model considers growth with carbon, phosphorus, and nitrogen balance, death and lysis of bacteria, and conversion of less biodegradable organic carbon to assimilable organic carbon. Experimental data from two raw and two treated waters were used to test the model. The model describes the increase of live and dead bacterial cells in the water phase, and its output closely matches the experimental data. Such a model has the ability to characterize water nutrient status as well as to predict behavior of indigenous heterotrophic bacteria. The ability to predict bacterial population dynamics with respect to nutrients is beneficial for water treatment optimization. The model, based on microbiological measurements, helps to characterize treated water quality and project performance in terms of water quality into a distribution system.

Modelling biofilm growth and disinfectant decay in drinking water

A simple biofilm model was developed to describe the growth of bacteria in drinking water biofilms and the subsequent interactions with disinfectant residuals incorporating the important processes, such as attachment of free bacteria to the biofilm on a wall surface, detachment of bacteria from the biofilm, growth of biofilm bacteria with chloramine inhibition, chloramine decay in the bulk water phase, and chloramine decay due to biofilm bacteria and wall surfaces. The model is useful in evaluating the biological stability of different waters, as it can predict concentration of organic substances in water. In addition, the model can be used to predict the bacterial growth and biofilm decay in distribution systems. A model of this kind is a useful tool in developing system management strategies to ultimately improve drinking water quality.

Sydney 1998 - lessons from a drinking water crisis

From July to September 1998, high concentrations of Cryptosporidium and Giardia were detected episodically in the water supply and distribution systems of Sydney, Australia. The resulting drinking water crisis triggered three consecutive boil-water advisories and a government inquiry into the management of the water supply. The episodic nature of the detections focused attention on the veracity of the laboratory results and triggered an investigation of the transport of these pathogens in Sydney's water supply system. This article provides information submitted to the Sydney Water Inquiry that explains the episodic occurrence of pathogens in the reticulated water supply, attributing it to rapid fluctuations in the quality of the water reaching the water treatment plant

Expanding criminal sanctions for corporate crimes-deprivation of right to work and cancellation of education qualifications

Fines are the standard sanctions employed by most Western countries when a corporation has been convicted of a crime. However, some offences committed by corporations are too serious to be dealt with by way of a fine. There is a need to consider other sanctions that can be invoked in order to deter corporate crime. In this article, it is suggested that the focus should be on criminal sanctions against the natural persons who can potentially commit crimes on behalf of a corporation. New sentencing options against those who can potentially commit crimes on behalf of a corporation should include the annulment or suspension of an offender's academic  qualifications and the making of orders preventing an offender from working or being enrolled in an educational or vocational pursuit.