Concerning the length of time slots for efficient gang scheduling

Applying gang scheduling can alleviate the blockade problem caused by exclusively used space-sharing strategies for parallel processing. However, the original form of gang scheduling is not practical as there are several fundamental problems associated with it. Recently many researchers have developed new strategies to alleviate some of these problems. Unfortunately, one important problem has not been so far seriously addressed, that is, how to set the length of time slot to obtain a good performance of gang scheduling. With gang scheduling time is divided into time slots of equal length, the number of time slots introduced in the system forms a scheduling round and each new job is first allocated to a particular time slot and then starts to run in the following scheduling round. Ideally, the length of time slot should be set long to avoid frequent context switches and so to reduce the scheduling overhead. The number of time slots in a scheduling round should also be limited to avoid a large number of jobs competing for limited resources (CPU time and memory). Long time slots and the limited number of time slots in each scheduling round may cause jobs to wait for a long time before it can be executed after arrival, which can significantly affect the performance of jobs, especially short jobs which are normally expected to finish quickly. However, the performance of a short job can also suffer if the length of time slot is not long enough to let the short job complete in a single time slot. In this paper we present a strategy to deal with this important issue for efficient gang scheduling.

Fast mining of non-derivable episode rules in complex sequences

Researchers have been endeavoring to discover concise sets of episode rules instead of complete sets in sequences. Existing approaches, however, are not able to process complex sequences and can not guarantee the accuracy of resulting sets due to the violation of anti-monotonicity of the frequency metric. In some real applications, episode rules need to be extracted from complex sequences in which multiple items may appear in a time slot. This paper investigates the discovery of concise episode rules in complex sequences. We define a concise representation called non-derivable episode rules and formularize the mining problem. Adopting a novel anti-monotonic frequency metric, we then develop a fast approach to discover non-derivable episode rules in complex sequences. Experimental results demonstrate that the utility of the proposed approach substantially reduces the number of rules and achieves fast processing.

The New Zealand gaming and betting survey : Chinese and Indian people's experience

Purpose – The purpose of this paper is to analyse attitudes, understanding of gambling and gambling related harm among Asians in New Zealand using secondary data from the New Zealand 2006/07 Gaming and Betting Attitudes Survey (GBAS).

Design/methodology/approach – This survey interviewed 1,973 nationwide randomly selected youths and adults (=18 years) using structured questionnaire. Chinese (N=113) and Indian (N=122) data were analysed separately to compare between them and with NZ Europeans (N=792). Descriptive analysis was carried out and was subsequently tested for significant correlations by weighted (p<0.01) and un-weighted (p<0.05) variables.

Findings – A higher proportion of Chinese males (66.8 percent) represented in the survey compared to Indian (43.0 percent) and NZ European (48.9 percent) where Chinese consisted of more youthful age structure. Chinese respondents were more likely to be in the lowest income bracket (NZ$10,000) compared to others. Among the ten gambling activities “casino table gambling” and “casino electronic machines” (slot-style machine) were most popular among the Chinese where Indians preferred “gambling/casino evening”. A significant proportion of Chinese were unwilling to refer family or friends to gambling help services despite believing that gambling does more harm than good. Pre-committed gambling sum was the most common harm minimising strategy suggested by participants. They believed education and consultation could deter youths from harmful gambling.

Research limitations/implications – This survey highlighted gambling behaviours and thoughts of the ethnic minority population in New Zealand. Study outcomes would be valuable in formulating ethnic specific preventative programme and may have policy implication.

Originality/value – There has been limited research on gambling behaviour of ethnic minorities in New Zealand. This paper fills some of the gaps.

A comprehensive analytical subdomain model and its field solutions for surface-mounted permanent magnet machines

This paper presents a comprehensive analytical subdomain model together with its field solutions for predicting the magnetic field distributions in surface-mounted permanent magnet (PM) machines. The tooth tips and slotting effects during open-circuit, armature reaction, and on-load conditions are considered when deriving the model and developing its solutions. The model derivations and field solutions are extended from a previous model, and can be applied to PM machines with any combinations of slot and pole numbers and any magnetization patterns in the magnets. This model is initially formulated according to Laplace's and Poisson's equations in 2-D polar coordinates by the separation of variables technique in four subdomains, such as magnet, airgap, winding slots, and slot-openings. The field solution of each subdomain is obtained applying the appropriate boundary conditions and interface conditions between every two subdomains, respectively, which can precisely account for the mutual influence between slots. Finite element analysis (FEA) is later deployed to validate the analytical results in a surface-mounted PM machine that has nonoverlapping winding arrangement. For validation purposes, PM machines having 3-slot/2-pole with parallel magnetization and 12-slot/10-pole with either parallel or radial magnetizations are used for comparisons. Computation of global quantities for the motor which include the phase back-EMF and cogging torque is also included. The results indicate that the proposed analytical model can accurately predict the magnetic field distributions in each subdomain and the motor's global quantities, which are in good agreement with those obtained from the FEA.

One-hit machining of titanium alloy (Ti-6al-4v) wall component with trochoidal milling

This research will definitely give guidelines to industries associated with titanium slot machining.

Analytical assessment of optimum magnet pole-arc for PMSM under influence of different magnetization patterns

Permanent magnet synchronous machines (PMSMs) are popular in both industrial and domestic applications because of its high efficiency, power density, and reliability as compared with the conventional types of electrical machines. Generally, the analytical models and their field solutions are preferable to provide an accurate insight of the PMSM performances, instead of using the finite element models, because the former takes a considerably shorter computational time. PMSM design could have different properties of either slotted or slotless, or varieties of magnet placement on the rotor. By focusing on semi-closed surface-mounted PMSMs, the 2D analytical subdomain model in [1] demonstrates an accurate prediction of the magnetic fields that can facilitate the evaluation of the global quantities of PMSMs, such as cogging torque (Tcog), back-EMF, and total harmonic distortion (THDv). Previously, researchers investigated the influences of the machine performance by a single factor, e.g., the variation of Tcog during changes of magnet pole-arc (αP) [2, 3], or slot-opening [2, 3]. These investigations normally considered two types of magnetization patterns, i.e., parallel (PaM) and radial magnetization (RM). Therefore, the motivation of our work hinges on predicting the optimum value of αP in designing a surface-mounted PMSM under influence of four different magnetization patterns, using the analytical subdomain model.

Electrical discharge machining of 6061 aluminium alloy

The wire electrical discharge machining (EDM) of 6061 aluminium alloy in terms of material removal rate, kerf/slit width, surface finish and wear of electrode wire for different pulse on time and wire tension was studied. Eight experiments were carried out in a wire EDM machine by varying pulse on time and wire tension. It is found that the material removal rate increases with the increase of pulse on time though the wire tension does not affect the material removal rate. It seems that the higher wire tension facilitates steady machining process, which generates low wear in wire electrode and better surface finish. The surface roughness does not change notably with the variation of pulse on time. The appearance of the machined surfaces is very similar under all the machining conditions. The machined surface contains solidified molten material, splash of materials and blisters. The increase of the pulse on time increases the wear of wire electrode due to the increase of heat input. The wear of wire electrode generates tapered slot which has higher kerf width at top side than that at bottom side. The higher electrode wear introduces higher taper.