Protein quality and physico-functionality of Australian sweet lupin (Lupinus angustifolius cv. Gungurru) protein concentrates prepared by isoelectric precipitation or ultrafiltration

The protein quality and physico-functional properties of Australian sweet lupin protein concentrates, prepared by isoelectric precipitation or ultrafiltration, were assessed. The ultrafiltration process resulted in a higher yield of protein than did the isoelectric precipitation process. The lupin kernel and the two lupin protein concentrates had similar essential amino acid compositions that were inferior to ideal human requirements. True digestibilities of the isoelectrically precipitated (ISO) and the ultrafiltered (UF) lupin protein concentrates were similar but significantly higher (P<0.05) than that of casein. Net protein utilisations (NPU) of the ISO and UF protein concentrates were similar but significantly lower (P<0.05) than that of casein. The UF protein concentrate had higher protein solubility than did the ISO protein concentrate (P<0.05). Low foaming capacity, low viscosity, but high emulsification capacity (particularly at low pH) were observed for lupin protein concentrates.

Effect of surface roughness of Ti, Zr, and TiZr on apatite precipitation from simulated body fluid

Some of the critical properties for a successful orthopedic or dental implant material are its biocompatibility and bioactivity. Pure titanium (Ti) and zirconium (Zr) are widely accepted as biocompatible metals, due to their non-toxicity. While the bioactivity of Ti and some Ti alloys has been extensively investigated, there is still insufficient data for Zr and titanium-zirconium (TiZr) alloys. In the present study, the bioactivity, that is, the apatite forming ability on the alkali and heat treated surfaces of Ti, Zr, and TiZr alloy in simulated body fluid (SBF), was studied. In particular, the effect of the surface roughness characteristics on the bioactivity was evaluated for the first time. The results indicate that the pretreated Ti, Zr and TiZr alloy could form apatite coating on their surfaces. It should be noted that the surface roughness also critically affected the bioactivity of these pretreated metallic samples. A surface morphology with an average roughness of approximately 0.6 microm led to the fastest apatite formation on the metal surfaces. This apatite layer on the metal surface is expected to bond to the surrounding bones directly after implantation.

Re-examination of the effect of NbC precipitation on shape memory in Fe-Mn-Si-based alloys

Current literature pertaining to the shape memory effect in the Fe–Mn–Si-based system is critically discussed. It is argued that the
enhanced shape memory previously attributed to NbC precipitation is mainly due to the associated thermo-mechanical treatments.
It is concluded that the thermo-mechanical processing of the alloy is the dominant factor that determines the shape memory effect in
this alloy system.

Effect of NbC and TiC precipitation on shape memory in an iron-based alloy

This paper examines the effects of TiC and NbC precipitation and prior cold rolling on the shape memory behaviour of an iron-based alloy. A precipitate-free alloy was used as a reference to investigate the relative contributions of prior-deformation and precipitation on shape memory. Heat treatment of the Nb- and Ti-containing alloys at 700 °C and 800 °C resulted in carbide precipitates between 120 nm and 220 nm in diameter. Bend testing of these samples showed a marginal increase in shape memory compared to the precipitate-free alloy. Under these conditions TiC precipitation exhibited slightly better shape memory than for NbC. However, this small increase was over-shadowed by the marked increase in shape memory that can be produced by subjecting the alloys to cold rolling followed by recovery annealing. When processed in this way, fine carbides are formed in the Ti- and Nb-containing alloys during the heat treatment. For particles >25 nm in diameter the shape memory is unaffected, but, it was found that small <5 nm particles have a detrimental effect on shape memory due to pinning of the martensite plates, thereby inhibiting their reversion to austenite. The optimum shape memory was observed in the precipitate-free alloy after cold rolling and recovery annealing.

Simultaneous removal of ammonia and phosphate from wastewater by precipitation of struvite using magnesia

A thorough investigation of conditions required for the precipitation of magnesium ammonium phosphate hexahydrate using magnesia as the source of magnesium was carried out and two computer models were used to make predictions as to optimum conditions for production of suitable crystal size and structure for a successful process. A process was developed and a bench scale model operated for a number of high ammonia wastes. Removal of ammonia was affected to levels of up to 97% with 94% ammonia removal being achievable consistently.

Effect of isothermal dissolution and re-precipitation of austenite on the mechanical properties of duplex structures

The hot deformation behaviour of a duplex ferritic/austenitic stainless steel was studied after different deformation conditions. The results showed a strange and interesting behaviour in the strength of the material during post-deformation studies. For most deformation conditions, the flow stress of the material was un-expectedly increased after annealing of deformed structures. This phenomenon implied that microstructural hardening occurred in the material during the interpass annealing rather than the expected softening. Also, an interesting change was observed where the morphology of the austenite phase changed from stringers or layers of austenite to a widmanstätten structure. The microstructural studies suggest that the austenite was dissolved and re-precipitated during the annealing process and the hardening was mostly associated with the change in the morphology of austenite.

Shear-enhanced solution precipitation : a simple process to produce short polymeric nanofibers

The growing interest in polymeric nanofibers has been increasing the push for the development of simple and efficient nanofiber-preparation techniques. We herein describe how a conventional solution process is readapted to suit the needs for fast and efficient production of short polymeric nanofibers. Poly(ethylene-co-acrylic acid) (PEAA), a semi-crystalline polymer, was used as model. When a PEAA solution was injected into an alcoholic non-solvent while simultaneously applying high shear to the non-solvent system, PEAA nanofibers were obtained with average diameter as thin as 113 nm and length as short as 4.5 _m. The fiber diameter and length were also adjustable by varying the operating parameters. This one-step technique advances the currently available nanofabrication tools by adjusting a widely accepted concept to the nano-scale. It may constitute a viable method for large-scale production of short polymeric nanofibers.

Nanoscale precipitation in advanced high strength steels

Precipitation strenghthening is one of the most important approaches for enhancing the strenght of microalloyed steels. This study has made a significant contribution in understanding the nucleation and growth mechanism of nanoscale interphase precipitates in steel during commercial processes. Atom Probe Tomography revealed the existence of nanoscale clusters with precipitates that then dictate the final strength.

Curtains and Doors: Imagery of Precipitation

This refereed conference paper discusses the symbolic unity of various visual motifs in terms of philosophy and metaphysics.  Linking themes to the visual use of curtains and doorways as ques to precipitous events.  

Impact of grain microstructure on the heterogeneity of precipitation strengthening in an Al-Li-Cu alloy

The effect of grain microstructure on the age-hardening behavior is investigated on recrystallized and un-recrystallized Al-Cu-Li alloys by combining electron-backscatter-diffraction and micro-hardness mapping. The spatial heterogeneity of micro-hardness is found to be strongly dependent on the grain microstructure. Controlled experiments are carried out to change the pre-strain before artificial ageing. These experiments lead to an evaluation of the range of local strain induced by pre-stretching as a function of the grain microstructure and results in heterogeneous formation of the hardening T1 precipitates.

β-Ti grain refinement via α-Precipitation

The present work explores the impact of α precipitates on β recrystallization following hot deformation of Ti-5Al-5Mo-5V-3Cr with grains larger than 1 mm. A single hot rolling pass of 36 pct reduction was conducted on an aged microstructure containing α precipitates at a temperature well below the β transus temperature. After annealing, a uniformly recrystallized structure with a grain size of ~100 µm is formed. The prior β grain boundaries can be readily identified and it is seen that the primary β grains have been replaced by grains displaying a spread of correlated misorientation angles extending up to the highest allowable values. The annealing comprises two stages. The first stage involves normal β subgrain growth limited by the Zener pinning force of the unstable α precipitates. The second stage corresponds to the onset of β recrystallization at the point where the Zener pinning force drops due to dissolution of the α precipitates. This leads to a uniform distribution of site saturated recrystallization nuclei.